New touchscreen scantool

[BlackStealth]

I made a new scantool for our vehicles, it uses a 2.8" touchscreen for quick navigation. Works on all year models of our cars 91-99, only the interface cable changes (OBD1, or OBD2/MUT). It communicates with all onboard computers, such as Engine, Transmission, ETACS, ABS, SRS (airbag), Climate control, Electronic Suspension (ECS), Cruise control. It can read error codes, clear codes, and perform diagnostic tests. Basically whatever the factory scantool does, this does also, except at a much lower price point and a less confusing user interface. It is going to be priced at around $180 shipped.

Here are some snapshots of the main menu, and the engine ecu interface.
https://i.imgur.com/qWVilGh.jpg
https://i.imgur.com/cMrYvzu.jpg
https://i.imgur.com/m49vWcF.jpg
https://i.imgur.com/7AzmQ75.jpg
https://i.imgur.com/qHx6luc.jpg
https://i.imgur.com/q3Kq5t4.jpg
https://i.imgur.com/SfTSdnN.jpg
https://i.imgur.com/k6d5tEC.jpg
https://i.imgur.com/OqmLXMw.jpg
https://i.imgur.com/u63C5dw.jpg
https://i.imgur.com/8TdeDhw.jpg
https://i.imgur.com/tqDvCoc.jpg
https://i.imgur.com/cEMoJFd.jpg
https://i.imgur.com/L73CVVO.jpg

[BlackStealth]

Oh yeah, if the black box looks familiar, it's because it utilizes the same electronics ie. LCDBC Addon.

[stealthee]

So if I have none of your tools and want this what all would I need to get?

[BlackStealth]

So if I have none of your tools and want this what all would I need to get?
It comes complete, no existing equipment required. This Monday I will receive new circuit boards, so we're just days away from me putting some up for sale in the classified section.

[Unlogic]

Nice, I'm impressed how you keep developing these neat little boxes.

[stealthee]

Ok cool. I'll have to look into it, even if I save it for once the TT engine is ready to go in sometime next winter. LOL

[RealMcCoy]

That's the one I've been waiting on... I'll be all over it when you have it ready.

[sublime_whatigo]

Im in. Anyone want to buy a drbii :)?

[gojo3]

Pretty Cool stuff

[OhioSpyderman]

I am DEFINITELY in!

When you have units to ship, put me on that list...have PayPal and will pay immediately!

Bob. :)

Please PM me when they are up fore sale...

[atarirx]

I’m in too! I’ve been hoping something like this would come along. Thank you!!!

[jroberts8983]

It comes complete, no existing equipment required. This Monday I will receive new circuit boards, so we're just days away from me putting some up for sale in the classified section.I'm definitely in. What would the cost be for both obd1 and 2 cables with the unit?

Sent from my SM-N950U using Tapatalk

[BlackStealth]

I'm definitely in. What would the cost be for both obd1 and 2 cables with the unit?

Sent from my SM-N950U using Tapatalk
$25 extra.

[j2k4]

I'm almost hoping I keep my car...:sad:

[Maddog]

In. Nice job!

[BlackStealth]

It's available now. I'll have more available when I get additional cigarette power adapters.

https://www.3sgto.org/threads/17224-Stand-alone-Scantool-communicates-to-all-computers-on-our-cars?p=343051#post343051

[VR-4 0wnz j00]

If we already have the ODBII converter, what is required for this?

[BlackStealth]

If we already have the ODBII converter, what is required for this?
Are you referring to the canbus converter that I made a while back? If so, nothing is common between the two, even the OBD2 cable is different.

The new touchscreen scantool comes complete, and doesn't require anything other than a Mitsubishi vehicle (pre-2005).

[RealMcCoy]

How complete is the coverage on the Monteros? Did you get all the ID's you needed there? besides this platform, I'm pretty sure I could get you a lot of sales from the Montero community...

[BlackStealth]

Mitsubishi uses the same request codes to display data (RPM, Throttle, Airflow, etc) on it's cars, so it's about 80% common. Some cars are equipped with other stuff such as turbo solenoid, VICS solenoid, EGR temperature (california), extra O2 sensors, etc. Equipped with the ECU ID number, I can discover the request codes for the missing 20%. I believe I have all the turbo 3S, DOHC 3S, but the SOHC 3S list is incomplete. The software on the scantool is upgradable by the end user, so I can expand it's functionality if we discover some of the missing SOHC 3S. Some day in the future, I am going to expand the software to support ISO9141 OBD2, so I can use it to monitor my minivan also. :)

As for Montero community, my scantool would already support about 80% of the ECU parameters, to find the missing 20% I would need their ECU IDs. Fortunately my scantool displays the ECU ID, so it is possible to find that missing 20% with software updates.

[Charlie3KGT]

I'm interested in the scanner but I can not see the page because I do not have access

[BlackStealth]

I'm interested in the scanner but I can not see the page because I do not have access
You do not have access to the first page of this post? Or you cannot see the images hosted on imgur.com ?

Attached is a combo picture of some screen shots for you. Click on picture to enlarge it.

[stealthee]

I'm interested in the scanner but I can not see the page because I do not have access

You probably don't have access because you didn't follow the instructions in the activation email where you need to make a post in the Welcome thread to activate the forum...

[Charlie3KGT]

You probably don't have access because you didn't follow the instructions in the activation email where you need to make a post in the Welcome thread to activate the forum...

yes, that is what happened. Thank´s

[BlackStealth]

Latest software update is now at v1.07.

http://lcdbc.xp3.biz/update.html