PDA

View Full Version : Fix for lower console/upper dash clips that don't stay.



Toni
06-27-2018, 04:49 PM
Very often the tabs on the lower center console are broken off. Usually from someone trying to remove the dash without removing the lower center console first. This also breaks the mounting point for the trim clips that cover the mating point.

With a little work with a drill/saw/hammer, you can make a bracket that recreates this opening for the clip springs.

http://primaryboost.com/store/spyder/random/dash_clip_02.jpeg

http://primaryboost.com/store/spyder/random/dash_clip_01.jpeg

j2k4
06-28-2018, 09:37 AM
Good one, Toni. :)

Alan92RTTT
06-28-2018, 01:38 PM
Nice.

Toni
06-28-2018, 02:01 PM
Someone in the other forum suggested to get some drawings up so people can quickly make their own. Should be able to knock that out pretty quick!

Toni
06-30-2018, 06:01 PM
Here is a "blueprint" that you can use to start.

http://primaryboost.com/store/spyder/random/dashClipBracket.png