PDA

View Full Version : do we have a 6 speed transfer case fix??????



Vrfury
04-07-2018, 04:11 PM
I tried searching some and I still do not know of any real actual fix.

my questions are:

1. is just a better gearset needed? from what ive read ray is professing the need for gears, not a different case.

2. can we use the services of the dsm crowd? my buddy has an 830awhp eclipse an told me they have transfer case gear upgrades available

3. is a better case needed?

4. can we do this without over analyzing and bitching about price?

I have all 5 speed cars but have seriously considered doing a 6 speed with MR gearset for a street car. however, if this problem isnt fixed, I will stick with 5 speeds and find a billet tcase for my street car. I just think the gearing is too long for our back roads around pa. I have more fun in my kia than my vr4 because of the gearing. just much less power.

2fnloud
04-07-2018, 05:21 PM
The stock 6spd T-case should be fine for a street car, just avoid clutch dumps. Ray's 6spd is dealing with just over 700 ft/lbs of TQ. But I agree I too would like a stronger 6spd T-case

Vrfury
04-08-2018, 01:00 AM
just avoid clutch dumps.

tha problm is thats how I drive hahahahahaha...... I cut a 1.6 an several1.7s on my i/e/bc/leaking vss 5spd vr4. I view evry stop light as a practice tree. tha car I plan on building will likely end up in rays power territory if I cn help it. I prefer torque ovr high end pull which always breaks hard parts.

futurevr4man
04-09-2018, 09:57 AM
Better gear set is needed, and maybe the case if it's flexing (unproven). The gears flat out strip though after enough launches.

Shep is one of the big dogs in the DSM crowd and he has shown a lack of interest in getting into our stuff. I've reached out to lots of places but haven't had any luck yet :/

2fnloud
04-09-2018, 10:54 AM
Better gear set is needed, and maybe the case if it's flexing (unproven). The gears flat out strip though after enough launches.

Shep is one of the big dogs in the DSM crowd and he has shown a lack of interest in getting into our stuff. I've reached out to lots of places but haven't had any luck yet :/

I contacted Shep, he was willing toi make a set of gears, but people started flooding him with questions. and it flopped.

j2k4
04-09-2018, 11:06 AM
And floppy gears = no good.