PDA

View Full Version : Interior dash harness question, URGENT



Mike-92RT
11-27-2017, 01:22 PM
Hi all, haven't posted in a long time..

I'm putting a new dash wiring harness in my N/A stealth, she mine had a bad electrical short.. forgive me for being dumb lol... but I do not know how to take the plugs out of the SRS computer.. I got a little angry and broke the clip on the donor car, and I don't want to wreck anything on my car.

Can anyone let me know how to safely remove the plugs without damaging anything? Lol

Mike-92RT
12-05-2017, 11:53 PM
Bump

Anyone???

stealthee
12-06-2017, 07:18 AM
There should just be a lock you have to slide before you pull the harness apart.

Mike-92RT
01-27-2018, 06:22 PM
Which tab are we talking about here? and how can I move it without it breaking? lol

9603

stealthee
01-27-2018, 08:27 PM
With those plug ins you just have to press on the tab in the middle there and pull. They are a tight fit and take a little effort to pull free. You have to squeeze hard too. Might want to use some pliers.

Mike-92RT
01-27-2018, 09:13 PM
Are you talking about the green tab? Its pushed down all the way.

If it is the green tab, i'll just take a pair of pliers then and try pulling the plugs out tomorrow.

stealthee
01-27-2018, 09:46 PM
Its been awhile, but I think you need to just release each plug individually. You'll squeeze the tab in the middle of each individual plug to release them.

anyonebutme
01-28-2018, 09:24 PM
I don't remember, but the FSM shows you how. I can't remember if you have to remove the metal clip before pressing the green button while pressing the release for each plug. The FSM is free to download so there is no reason not to have it.