PDA

View Full Version : Wanted Emissions crap


x2xtreme360
10-18-2010, 11:54 PM
I need the EGR pipe that goes from the rear turbo manifold to the plenum and the charcoal canister/purge valve from a 94-99 VR4 or TT. I don't think the EVAP from my 94 NA will work with the VR4.

Stupid inspection ticket.
terrets
10-19-2010, 02:30 AM
I have a cracked one? 10bucks shipped :lol:
Austin@STM
10-19-2010, 10:37 AM
who gets inspected :p
x2xtreme360
10-19-2010, 10:57 AM
who gets inspected :p

I know, right? Not me... until now.
jba3
10-19-2010, 04:54 PM
Pretty sure I have that from my 95 VR4 vac reduction. Will check the garage tonight/tomorrow.
x2xtreme360
10-21-2010, 01:00 PM
Well, I got hold of an EGR pipe. Now, I need the EVAP purge valve. I don't know if I need the charcoal canister. I think I can rig up the valve to just make the CEL go away... but I'm still not sure about that.

So, if you have the purge control valve used in the EVAP system, let me know.
terrets
10-21-2010, 01:57 PM
I do...I dont exactly know what the part is but I did an egr delete and have it somewhere :D

If you want to just cover shipping its yours.
x2xtreme360
10-21-2010, 02:00 PM
I do...I dont exactly know what the part is but I did an egr delete and have it somewhere :D

If you want to just cover shipping its yours.

Just make sure it's the EVAP purge valve. It's not part of the EGR system but it's usually removed when the vac reduction is performed.

Care to snap a pic and PM it to me?
jba3
10-25-2010, 08:57 AM
I found all my vac reduction box-o-stuff yesterday. Mine is more expensive than Terrets though, since it was 4 days ago, hope you're squared away now. :D
terrets
10-26-2010, 03:25 PM
Sorry I finally found the damned thing....I cant get it off the bracket so it has PB Blaster on it right now. The brackets a bit rusted.....

http://i211.photobucket.com/albums/bb66/lilguitarist4/1994%203000gt/downsized_1026101337.jpg

If I cant get it off the bracket Ill just send you the whole bracket :lol:
x2xtreme360
10-26-2010, 08:51 PM
Sorry I finally found the damned thing....I cant get it off the bracket so it has PB Blaster on it right now. The brackets a bit rusted.....

http://i211.photobucket.com/albums/bb66/lilguitarist4/1994%203000gt/downsized_1026101337.jpg

If I cant get it off the bracket Ill just send you the whole bracket :lol:

oh, thanks man... but I need the purge valve. Not the solenoid.
terrets
10-27-2010, 12:39 AM
Oh....Where the purge valve? haha Its not on the evap tank is it?
x2xtreme360
10-27-2010, 11:10 AM
Kind of yes. The purge valve is what the line on the front preturbo pipe connects to.
terrets
10-27-2010, 05:11 PM
Ohhhh. Ok I can get a picture for you tomorrow. I still have the tank and that little thing connected to the tank :D Which Im assuming is the purge valve.
terrets
10-28-2010, 09:53 AM
This is what you need right?
http://i211.photobucket.com/albums/bb66/lilguitarist4/1994%203000gt/downsized_1028100725.jpg
x2xtreme360
10-28-2010, 10:21 PM
This is what you need right?
http://i211.photobucket.com/albums/bb66/lilguitarist4/1994%203000gt/downsized_1028100725.jpg

why yes sir that would be it.
terrets
10-29-2010, 02:26 AM
Ok pm me with your address. Shipping shouldnt be more then 10 dollars. :lol: It should be cheaper but I dont know. paypal: lilguitarst4@yahoo.com