PDA

View Full Version : Custom 1st gen stealth bumper cut/remold + fmic and some info on how I did it.



Toni
10-18-2010, 06:03 PM
(Posted this over at 3si and figured I'd post it here as well, I like to get opinions and maybe spread some knowledge)

So it started with a new fmic. Then I wanted to do a bumper cut...Well eventually I landed on doing a complete remold. I used a variety of SEM products for hard to bond plastic repair. I decided to invest in some product (~120) because I wanted to do some other things later and I was curious how well they work. Turns out they aren't too bad just takes a lot time, sanding, blocking, etc. I still need to do more but I was eager to get a coat of paint on it just to see how it really looked before I spent more hours. This will be fine for the rest of the season.

the before
http://www.primaryboost.com/store/RT/bumpercut/02before02.jpg

and the after!

http://www.primaryboost.com/store/RT/bumpercut/IMG_0426.JPG

I ended up cutting this piece out.

http://www.primaryboost.com/store/RT/bumpercut/IMG_0298.JPG

and moving it up, then filled/smoothed the rest.

http://www.primaryboost.com/store/RT/bumpercut/IMG_0299.JPG

Atrosity
10-18-2010, 06:10 PM
Ok that is really effin clean looking while still having the dodge front bumper trademark! Love it!

Toni
10-18-2010, 06:13 PM
Yeah I think I'm actually going to remove it since I decided I'll repaint to the real color anyway :)

familyMAN
10-18-2010, 06:23 PM
Great job! That looks very good!

stealthee
10-18-2010, 06:48 PM
It would look better if the headlight lids were still black and snake eyes were unpainted. It makes it look too much like an ES.

IPD
10-18-2010, 08:16 PM
excellent. too bad the crosshairs aren't quite symmetrical.

Mikes2nd
10-19-2010, 12:53 AM
excellent. too bad the crosshairs aren't quite symmetrical.

true... get er done...

Toni
10-19-2010, 04:29 PM
It would look better if the headlight lids were still black and snake eyes were unpainted. It makes it look too much like an ES.

ES really? I had a red ES and I guess I fail to see the connection :) I actually can't stand the black roofs and lights, I think it ages the car too much.


excellent. too bad the crosshairs aren't quite symmetrical.

Symmetrical? I'm guessing you mean the gap above and below the crosshair? If so yea, I had looked a few photo shops and to me I stuck with it lower. It looked better to me that way. Plus it was much easier because I didn't have to do anything to it :)

As always to each his own but I'm generally interested in comments! otherwise why post right? :)

Emilie@GZP
10-19-2010, 04:46 PM
awesome work for sure! :) looks good :)

IPD
10-19-2010, 06:29 PM
Symmetrical? I'm guessing you mean the gap above and below the crosshair? If so yea, I had looked a few photo shops and to me I stuck with it lower. It looked better to me that way. Plus it was much easier because I didn't have to do anything to it :)

As always to each his own but I'm generally interested in comments! otherwise why post right? :)

i just figured since you went to so much trouble to keep the crosshair, i thought you'd try and move the crosshair up too. lots more work though, for sure.

i plan on splicing 2 bumpers into 1 in the future....

stealthee
10-19-2010, 09:47 PM
awesome work.. extremely clean!

Awesome kjz made a post from the future.

Nationalmilkman
10-19-2010, 10:06 PM
Not to fond of it. The crosshairs would look better moved up but I didn't do it and the work looks great. I'm looking to do a little custom work on my front bumper and I hope mine will be able to be pasted off as stock like this one could be. Looks like it did the trick to getting the FMIC aired out.

kjzstealth
10-20-2010, 05:53 AM
awesome work.. extremely clean!

EZnTn
10-20-2010, 05:18 PM
Potential .. lots of potential & appears like you are well on your way.
Lookin' great
Info on materials used?

blindmist
10-20-2010, 06:15 PM
Awesome kjz made a post from the future.

:lol:

kjzstealth
10-20-2010, 09:04 PM
I don't know how I made a post from the future. Wait, maybe it's because of this flux capacitor sitting right here..

Toni
09-29-2011, 04:53 PM
Freebump...Updating my picture links because of a server change...Let me know if you are looking for me to update something specific.