PDA

View Full Version : ECU wiring, quick help needed



blindmist
10-18-2010, 09:59 AM
Ok, so I am finishing my EMU install and have a question before I go any further, and this is ts the last things I have to do.

Here is the point I am at. The 91-93 don't have crank angle sensors correct? Yet, the pinout states that on a 91-93 DOHC, Crank angle is pin 69 and the TDC is pin 68. So my question is, do I hook the EMU crank angle to pin 69 and the Cam angle to the "TDC Sensor" pin 68?

http://www.stealth316.com/images/ecu-conn_91-93.gif

http://www.stealth316.com/images/ecu_91-93_2.gif

CoreyB
10-18-2010, 10:24 AM
They do have a crank sensor. Its just that the crank sensor and cam sensor are in one housing. My guess would be yes, hook it up the way you described.

blindmist
10-18-2010, 10:27 AM
They do have a crank sensor. Its just that the crank sensor and cam sensor are in one housing. My guess would be yes, hook it up the way you described.

Really. So it has, I'm guessing, two dots 180 degrees apart and that sensor has two lights in it? Cool...

CoreyB
10-18-2010, 10:30 AM
Kinda like that. Its more slots than 2 though. I believe its two rows of slots on one wheel with two sensors.

CoreyB
10-18-2010, 10:34 AM
Check it out here http://www.stealth316.com/2-cas-91-92.htm

blindmist
10-18-2010, 11:49 AM
Sweet, got it all working. I just wired in Vehicle Speed Sensor, Cam angle, Crank angle, Intake temp, Water, temp.

CoreyB
10-18-2010, 11:55 AM
Nice, congrats.