2fnloud
04-02-2016, 08:54 PM
Congratulations to DocWalt and his 2013 SUBARU BRZ (All Cars!)
DocWalt's Garage Link (http://www.3sgto.org/garage_vehicle.php?do=view_vehicle&id=665)
I picked up a BRZ to daily drive while modding my old GTI and as you can see that didn't exactly last for very long. My mod-list is as follows:
- Cosworth Panel filter
- Wheelhaus CF third brake light
- JDL Auto Design UEL header
- JDL Overpipe
- JDL "Ultra Quiet" frontpipe. Catted & Resonated.
- Open Flash Tablet for loading tunes
- STI/Group-N engine & trans mounts
- SRP throttle pedal
- TRD clone spoiler
- Whiteline diff bushing inserts (rear only, the outrigger bushings make too much diff whine on decel)
- Perrin 2.5" Resonated Catback
- Carbotech XP10/XP8 pads (for track days, way too dusty for prolonged street use)
- Maximal Performance Oil Cooler
- Ohlins Road & Track coilovers
- TOM'S DOT red taillights
- SPC rear camber arms
- Whiteline subframe bushing inserts
- Enkei RPF1 17x9 ET35 in Gold
- STI lip (polyurethane clone)
- OEM mudflaps
- GT3 brake air guides
I've had a lot of fun autocrossing the BRZ and taking it to the track. Tons of fun and I'm looking forward to 2016 with all of my new additions!
http://www.3sgto.org/garage_attachment.php?id=3213
http://www.3sgto.org/garage_attachment.php?id=3209
http://www.3sgto.org/garage_attachment.php?id=3211
DocWalt's Garage Link (http://www.3sgto.org/garage_vehicle.php?do=view_vehicle&id=665)
I picked up a BRZ to daily drive while modding my old GTI and as you can see that didn't exactly last for very long. My mod-list is as follows:
- Cosworth Panel filter
- Wheelhaus CF third brake light
- JDL Auto Design UEL header
- JDL Overpipe
- JDL "Ultra Quiet" frontpipe. Catted & Resonated.
- Open Flash Tablet for loading tunes
- STI/Group-N engine & trans mounts
- SRP throttle pedal
- TRD clone spoiler
- Whiteline diff bushing inserts (rear only, the outrigger bushings make too much diff whine on decel)
- Perrin 2.5" Resonated Catback
- Carbotech XP10/XP8 pads (for track days, way too dusty for prolonged street use)
- Maximal Performance Oil Cooler
- Ohlins Road & Track coilovers
- TOM'S DOT red taillights
- SPC rear camber arms
- Whiteline subframe bushing inserts
- Enkei RPF1 17x9 ET35 in Gold
- STI lip (polyurethane clone)
- OEM mudflaps
- GT3 brake air guides
I've had a lot of fun autocrossing the BRZ and taking it to the track. Tons of fun and I'm looking forward to 2016 with all of my new additions!
http://www.3sgto.org/garage_attachment.php?id=3213
http://www.3sgto.org/garage_attachment.php?id=3209
http://www.3sgto.org/garage_attachment.php?id=3211