Speed Daddy exhaust

[Bamboozler]

Hey guys so this will be my final post in the exhaust trilogy but here is one that im planning to get for my 93 n/a

http://www.ebay.com/itm/DUAL-4-MUFFLER-RACING-DOWNPIPE-TURBOBACK-CATBACK-EXHAUST-91-99-3000GT-VR-4-GTO/190673580386?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%2 6asc%3D36188%26meid%3D20e80158f1314a1d9cb4cce14dd6 8557%26pid%3D100005%26rk%3D2%26rkt%3D6%26sd%3D3803 93899666

i already know the downpipe wont fit this is also the cheapest exhuast thats there also planning on getting a 3sx testpipe like all the cool people

thoughts?

[stealthee]

It looks like a test pipe comes with it in the picture.

One thing I will say is speed daddy is not necessarily known for great fitment. A lot of Grand Prix guys do run their headers and most junk the flex that comes with them and install better. Then they usually have to use silicone to get proper sealing. And lastly they usually have to make some tweaks so they bolt up properly and don't hit anything.

[Turbo Beast]

Looks like a tanabe knock off

[anyonebutme]

Same exhaust that was sold under the M2 name before, except they no longer have the center vband connection. They are decent. It's the new apexi N1 of the 3S world, so get one if sounded just like every 3S at a gathering doesn't bother you.

[Bamboozler]

It looks like a test pipe comes with it in the picture.

One thing I will say is speed daddy is not necessarily known for great fitment. A lot of Grand Prix guys do run their headers and most junk the flex that comes with them and install better. Then they usually have to use silicone to get proper sealing. And lastly they usually have to make some tweaks so they bolt up properly and don't hit anything.
Hmmmm I would like it to fit good there isnt alot if stuff about it on the internet its a little less raspy than the manzo which is why I wanna get it


Sent from my SAMSUNG-SM-G920A using Tapatalk