Injector Scaling in Chrome - ID1000s rated (1000) vs EVO scale (812)

[awdonly]

I have some ID1000s I'm installing. Was planning to set scaling at the rated 1000cc per the general Chrome setup instructions, but the EVO guys (http://www.evolutionm.net/forums/ecuflash/457738-injector-scaling-latency-supermerge.html) report scaling set nearly 20% richer at 812 for these injectors on gas.

Do the EVO settings translate directly into Chrome or should I start at 1000 and play from there?

[Chris@Rvengeperformance]

The evo guy's scaling is about 10% too low compared to the way chrome is setup. I'd start about 900 and go from there. The ID1000s when flowed with industry standard fluid flow about 925.

[awdonly]

Thank you Forest.