PDA

View Full Version : NEW 3SX Y-Pipes That FIT Properly!



SUTHNR
01-05-2016, 10:27 AM
We have been working with yet another manufacturer to get some properly fitting y-pipes on the market again. And we finally have success!

Unlike all the other ypipes out there, this one is made with 2.75-inch piping to fit directly against the throttle body without the use of an expensive reducer, and without having to cram/jam clamp down a larger 3.0" coupler onto the smaller 2.75" throttle body. It also features rolled and flared ends on all of the pipe junctions which will help prevent the infamous "blown y-pipe".

We also made sure the radius of the 90-degree turn into the throttle body was a tight enough radius to fit the pipe with a stock sized battery. Note the picture below showing it installed in a mostly-stock car!

3SX Custom Stainless Y-Pipe Intake Pipe Turbo Intake Ypipe - Mitsubishi 3000GT / Dodge Stealth Parts (http://www.3sx.com/store/comersus_viewItemBundle.asp?idProduct=35508)

We have them on a limited time introductory SALE as well!

The 3SX Crew


http://www.3sx.com/store/catalog/ypipe-3sx-intake-stainless-2015ver-28-ad-logo.JPG

http://www.3sx.com/store/catalog/ypipe-3sx-intake-stainless-2015ver-23-ad-logo.JPG

http://www.3sx.com/store/catalog/ypipe-3sx-sample-20150923-testing-21-ad-logo.JPG