SUTHNR
12-10-2015, 01:21 PM
We are working with a company to get some QUALITY TD04 stock replacement / stock location manifolds made. We have the prototype front manifold and it is a BEAST!
We are planning to get these made but really want to gauge interest in them and see if people really WANT them. We do anticipate the price to be around $980 for the pair of front and rear manifolds. However, we are going to offer an early buy-in / layaway for those truly interested for the price of $825 for the pair. Locking in that price will require a deposit of $250 now. We anticipate only about 6 weeks for production once we give the GO so we are hoping for 1st quarter of 2016!
Please indicate if you are interested in these manifolds, and if you want to lock in the intro price, please send a $250 paypal to orders@3sx.com and put in the comments "For TD04 Manifolds Buy-In". Or you can call 704-786-6400 and set it up over the phone with credit card. Of course, if there is not enough interest to warrant full production, we'll refund the full deposit.
1. Chris - Deposit Paid
2.
3.
4.
5.
Check out the pics of the front one we have test fitted on a motor. Note that the welds will be better on the production items. And by BEAST I'm referring to the fact that this manifold weighs in at a stout 9.7 pounds! Plenty of strong steel in there to support TD04 turbos and last for years - certainly better than the cracked stock manifold from Mitsubishi! Also, the inlet ports from the heads are ported and gasket matched.
We're really excited to be offering these and hope for a positive response! These should pair very well with the new 3SX TD04 Turbos (http://www.3sx.com/store/comersus_listItems.asp?strsearch=3sx+td04)!
Thanks!
EricB and the 3SX Crew
http://www.3sx.com/store/catalog/manifold-tubular-3sx-prototype-front-20151119-24-ad-logo.jpg
http://www.3sx.com/store/catalog/manifold-tubular-3sx-prototype-front-20151119-46-ad-logo.jpg
http://www.3sx.com/store/catalog/manifold-tubular-3sx-prototype-front-20151119-65-logo.JPG
We are planning to get these made but really want to gauge interest in them and see if people really WANT them. We do anticipate the price to be around $980 for the pair of front and rear manifolds. However, we are going to offer an early buy-in / layaway for those truly interested for the price of $825 for the pair. Locking in that price will require a deposit of $250 now. We anticipate only about 6 weeks for production once we give the GO so we are hoping for 1st quarter of 2016!
Please indicate if you are interested in these manifolds, and if you want to lock in the intro price, please send a $250 paypal to orders@3sx.com and put in the comments "For TD04 Manifolds Buy-In". Or you can call 704-786-6400 and set it up over the phone with credit card. Of course, if there is not enough interest to warrant full production, we'll refund the full deposit.
1. Chris - Deposit Paid
2.
3.
4.
5.
Check out the pics of the front one we have test fitted on a motor. Note that the welds will be better on the production items. And by BEAST I'm referring to the fact that this manifold weighs in at a stout 9.7 pounds! Plenty of strong steel in there to support TD04 turbos and last for years - certainly better than the cracked stock manifold from Mitsubishi! Also, the inlet ports from the heads are ported and gasket matched.
We're really excited to be offering these and hope for a positive response! These should pair very well with the new 3SX TD04 Turbos (http://www.3sx.com/store/comersus_listItems.asp?strsearch=3sx+td04)!
Thanks!
EricB and the 3SX Crew
http://www.3sx.com/store/catalog/manifold-tubular-3sx-prototype-front-20151119-24-ad-logo.jpg
http://www.3sx.com/store/catalog/manifold-tubular-3sx-prototype-front-20151119-46-ad-logo.jpg
http://www.3sx.com/store/catalog/manifold-tubular-3sx-prototype-front-20151119-65-logo.JPG