bboyalan
09-02-2015, 05:31 AM
I just recently finished tuning these two friends/clients' cars, and I decided it was time to line them up again now that the playing field was more even and fair. The outcome might have been a little different from a higher roll and starting more adjacent, but it is what it is! No complaints from anybody haha!
'93 VR-4: Light BPU, stock 4-bolt, 0.8bar WG's, GReddy EMU, Pump-E85, and 17-18psi.
'06 EVO: Light BPU, stock block, Tephra v7, Pump-E85, and 25psi.
Both cars have stock snail(s), stock IC(s), and stock MAFS (for now).
Enjoy!
-ALan
https://www.youtube.com/watch?v=qXOzocKFfCY
PS1: This is just ONE the Evo's that I said I would tune and race against the DR750 Stealth (finishing break-in) in this thread:
AEM/E85/9b VR-4 versus Forged/Heads/Cams/DR750 Stealth (http://www.3sgto.org/racing/15791-aem-e85-9b-vr-4-versus-forged-heads-cams-dr750-stealth.html) <<
That may or may not be happening this weekend ;) just in time too!
PS2: The Evo owner also has a ~440whp VR-4 that I will resume tuning next week, so more on that one in the near future :D
'93 VR-4: Light BPU, stock 4-bolt, 0.8bar WG's, GReddy EMU, Pump-E85, and 17-18psi.
'06 EVO: Light BPU, stock block, Tephra v7, Pump-E85, and 25psi.
Both cars have stock snail(s), stock IC(s), and stock MAFS (for now).
Enjoy!
-ALan
https://www.youtube.com/watch?v=qXOzocKFfCY
PS1: This is just ONE the Evo's that I said I would tune and race against the DR750 Stealth (finishing break-in) in this thread:
AEM/E85/9b VR-4 versus Forged/Heads/Cams/DR750 Stealth (http://www.3sgto.org/racing/15791-aem-e85-9b-vr-4-versus-forged-heads-cams-dr750-stealth.html) <<
That may or may not be happening this weekend ;) just in time too!
PS2: The Evo owner also has a ~440whp VR-4 that I will resume tuning next week, so more on that one in the near future :D