How do you change the transmissin speed sensor?

[kjzstealth]

I need to know how to change my transmission speed sensor with the tranny still in the car. I know you have to take the bolt out and everything but how do you get the sensor itself out the easiest? Any help or direction to a walkthrough would be appreciated. Thanks for your help with this possibly simple question

[stealthee]

Pull on it til it comes out.

[kjzstealth]

thanks... hoped there was something a il better than that as I tried that when I unplugged it. I even tried turning it

[DocWalt]

Wiggle it, they tend to stick in there. The gear might hold on if the gear is all trashed in there, but it should still pull out.

[kjzstealth]

it seemed the gear was still good... it was the sensor itself that started smoking!!!

[stealthee]

Better off replacing the whole thing. I had that happen before and at first I just replaced the top half, then later on the center section that the gear spins that sends signal to the speedo stripped out.

[kjzstealth]

Where can I find the rest of it?

Once you get the whole thing apart, how do you separate the sensor from the other part?
I may have to do this as money is tight right now

[stealthee]

You can seperate it, but you can't buy it seperately. I just had another top part laying around from a 1g that had a different gear.