Bloodlust182
05-08-2015, 04:25 PM
I was building a 2 bolt TT motor but I have stumbled across a 4 bolt for a good price. This is a NON-spun bearing 2 bolt block! I pulled it from a salvage car with 117k on the odo.
Has been:
Hot-tanked
Cylinders Honed
Forged Crankshaft from a non-spun bearing motor
polished crankshaft
WPC treated Clevite standard bearings
Stock pistons/rods
Sealed Power rings
OEM oil pump
AISIN water pump.
OEM Rear main seal
I plastigaged all the bearings and the specs all came out to .002 IIRC.
I painted the block and oil pan with Black Engine enamel it sits like this as of now. I used ultra black silicone for the pan gasket in case you were wondering.
http://i289.photobucket.com/albums/ll203/bloodlust182/20140416_184308_zpsgntnv4ul.jpg (http://s289.photobucket.com/user/bloodlust182/media/20140416_184308_zpsgntnv4ul.jpg.html)
(no, the toilet isn't for sale)
http://i289.photobucket.com/albums/ll203/bloodlust182/1622161_10202992047542710_1217144176_n_zps991bbd40 .jpg (http://s289.photobucket.com/user/bloodlust182/media/1622161_10202992047542710_1217144176_n_zps991bbd40 .jpg.html)
(assembled in my room haha)
What you see is what you get (water pump is not in the pic but it is currently installed and will come with the block)
All this taken into account I would like to get $1000 plus shipping. I also have some 1G 2 bolt heads that I lightly ported and polished I can throw in for a little more.
Has been:
Hot-tanked
Cylinders Honed
Forged Crankshaft from a non-spun bearing motor
polished crankshaft
WPC treated Clevite standard bearings
Stock pistons/rods
Sealed Power rings
OEM oil pump
AISIN water pump.
OEM Rear main seal
I plastigaged all the bearings and the specs all came out to .002 IIRC.
I painted the block and oil pan with Black Engine enamel it sits like this as of now. I used ultra black silicone for the pan gasket in case you were wondering.
http://i289.photobucket.com/albums/ll203/bloodlust182/20140416_184308_zpsgntnv4ul.jpg (http://s289.photobucket.com/user/bloodlust182/media/20140416_184308_zpsgntnv4ul.jpg.html)
(no, the toilet isn't for sale)
http://i289.photobucket.com/albums/ll203/bloodlust182/1622161_10202992047542710_1217144176_n_zps991bbd40 .jpg (http://s289.photobucket.com/user/bloodlust182/media/1622161_10202992047542710_1217144176_n_zps991bbd40 .jpg.html)
(assembled in my room haha)
What you see is what you get (water pump is not in the pic but it is currently installed and will come with the block)
All this taken into account I would like to get $1000 plus shipping. I also have some 1G 2 bolt heads that I lightly ported and polished I can throw in for a little more.