Six Speed Transfer cases

[Chris@Rvengeperformance]

Well, by some luck I ended up with 3 six speed transfercases, so one or 2 needs to go.

#1 from a JDM six speed trans, same as USDM, but low miles.

http://www.chrisbehnken.com/Images/photos/trans2015/WP_20141030_003CG.jpg?635660665883997559

I fully re-sealed this with the mitsu seal/recall kit. It wasn't leaking when I got it, but its a good safety measure. Spool is excellent/perfect.

$400 shipped

#2 bought this from a partout. Could use some paint and the input spool seal could stand to be replaced. Came from a running car. Spool has some wear, but usable.

http://i1192.photobucket.com/albums/aa327/fastfalcon94/yellowvr4partout/IMG_20150422_220509_626_zpsfspwaimq.jpg

http://i1192.photobucket.com/albums/aa327/fastfalcon94/yellowvr4partout/IMG_20150422_220459_218_zpsymo0ydpe.jpg

http://i1192.photobucket.com/albums/aa327/fastfalcon94/yellowvr4partout/IMG_20150422_220448_434_zps1vnggh29.jpg

Very good for a spare for when your gears blow up or just run it.

$200 shipped for that one. Shipping is kinda expensive on these, so keep that in mind.

If I sell one I may not sell the other, so whichever one goes first is the one sure to sell.