Gray Haze
04-15-2015, 10:04 AM
IPS TD05 Evo3 Big 16G kit
IPS Ceramic Coated Headers & o2 housings
IPS Coolant Lines, Brand NEW.
IPS Oil Lines and all fittings.
IPS TD05 MAF intakes, polished, Brand NEW.
IPS TD05 Kit adapter pipes. All that you need to bolt up to a CXR FMIC.
GENUINE MHI Evo3's converted for a 3S.
EGT Sensor on front header, will include TWO new sensors.
New o2 sensors in the o2 housings as well.
This was purchased years ago from IPS, installed on the car, allowed to run for approx 170 miles before oil pressure was indicating it was time to open up the rebuilt engine installed in the car at the same time. Engine itself never spun a bearing, and didn't trash any components internally, was just due to poor tolerance from a machine shop. Turbos spin free, and are flawless.
To buy this kit new today, would cost almost 5K dollars, not including some of the extras included. Add a down pipe, and a CXR FMIC kit, a little fuel and engine management and get ready to lay down over 600whp, and tap the 10 second 1/4s for fun. Considering the mileage and condition of said kit, I am willing to take a hit on the cost, but WILL NOT give it away.
7860
7861
7862
7863
7864
Can get more pictures upon request.
3500 OBO.
IPS Ceramic Coated Headers & o2 housings
IPS Coolant Lines, Brand NEW.
IPS Oil Lines and all fittings.
IPS TD05 MAF intakes, polished, Brand NEW.
IPS TD05 Kit adapter pipes. All that you need to bolt up to a CXR FMIC.
GENUINE MHI Evo3's converted for a 3S.
EGT Sensor on front header, will include TWO new sensors.
New o2 sensors in the o2 housings as well.
This was purchased years ago from IPS, installed on the car, allowed to run for approx 170 miles before oil pressure was indicating it was time to open up the rebuilt engine installed in the car at the same time. Engine itself never spun a bearing, and didn't trash any components internally, was just due to poor tolerance from a machine shop. Turbos spin free, and are flawless.
To buy this kit new today, would cost almost 5K dollars, not including some of the extras included. Add a down pipe, and a CXR FMIC kit, a little fuel and engine management and get ready to lay down over 600whp, and tap the 10 second 1/4s for fun. Considering the mileage and condition of said kit, I am willing to take a hit on the cost, but WILL NOT give it away.
7860
7861
7862
7863
7864
Can get more pictures upon request.
3500 OBO.