lgvenable
03-05-2015, 10:18 AM
I need the complete ECS setup from a Gen 1 FWD...will take gen 2 if it fits. It'd be nice if the struts were in good shape, but if not I'm planning on replacing them. I'm looking for the complete setup of the ECS, electronic controllers to mount in car, the wiring harness caps, all mounting hardware..the complete ball of wax.
I only get quality parts; and follow the old adage "Buy nice or buy twice".
I have a set of JIC FLT-TAR Z11A FWD Coilovers on the car which I'm willing to exchange for the right mix of an ECS system plus cash... or alternate parts as we agree.
The reason I want to do this?? While the car handles dead flat in corners,the roads in Tulsa suck -you wouldn't believe them -> they are horrible; as the city and state engineers should be executed for how bad they've let the roads deteriorate. Hence I'm want to go to the full on factory ECS system.
I'd be willing to work with someone to exchange their COMPLETE ECS system plus cash TBD- complete with electronics for the more expensive less than 1 year old JIC coilovers. They've got about 1500 miles (max) on them - and look pristine? That said these coilovers are in PERFECT condition -->> the car is not driven in inclimate weather- so they look brand new, and are less than 1 year old. Satisfaction is guaranteed.
All of this is coming out of a Gen 1 92 FWD base.
A straight ECS exchange of parts and controller etc plus cash is ideal... as an FYI I have about $1500 to $1600 in the JIC coilovers. I can look under the wheel wells and look at the color of the springs..I'm thinking they are blue (front) and gray rear; but I can double check that so you'd know the setup . I paid extra to have John at JIC work on the set to optimize their performance. For the right deal I'm willing to work with the person who want to do the deal to put a set of springs on the rear coilovers of their KG Loading rate choice, as the front springs on my FWD seem pretty close to perfect; as well as have the coilover rebound rate and dampening optimized by John after the spring change...thats a 180.00 bill on top of what I've already paid plus shipping both ways
I'd say on handling that these allow the car to approach a '09 Corvette Z06 (I've got one of those) handling in the corners - as I had did the complete the aftermarket suspension setup (short of the coilovers) from 3SX as well when the coilovers were put on.
Finally - I have to say it- as not everyone I've dealt with on Mitz forums have dealt with me honestly- having gotten scammed on at least one deal where I paid $700 for brake parts (on 3Si) which were not everything they were claimed to be....enthusiasts like me that have been doing this for 23 years know what I mean...
So...I'm a straight shooter and want to deal with the same kind of enthusiast. Bull$hit/lowballer artists expect to get ignored, so please lets not go there. I might be an older enthusiast...but I'm not addled; and I'd love to do a clean straight up deal where everyone says what they'll do, then their actions completely match their promise...heres a fact -->> mine will <<--
While I did not hammer the cretin that ripped me in feedback (as it would have been counter-productive) he knows who he is. I don't do this stuff to make money -->>> just to make my cherry 92 3000GT w/80,000 miles run better. Do me right and I;ll make you a great deal. I've got 100% feedback on eBay after 500 transactions for a reason-> no one ever gets ripped off.
I'm a coating chemist who runs a large regional paint companies corporate technical lab and QC lab...so for the right guy I could make the deal really interesting if they wanted to undercoat their car with a polyurethane or a reactive flexible epoxy system - like Ziebart etc that I designed 6 years ago. I could also supply a zinc rich primer (where the zinc is sacrificial and helps eliminate corrosion under the car and on the frame for 10 to 20 years) along with a polyurethane topcoat (in black for under the car); or in any other color needed. SInce those coatings cost $$$ I could supply them at my cost to the right deal. They are the sort of under-carriage coating that is used in the Gulf of Mexico to prevent corrosion on oil rigs.
I'll look forward to any inquiries. This is posted at the "other forum" as well.
Larry
I only get quality parts; and follow the old adage "Buy nice or buy twice".
I have a set of JIC FLT-TAR Z11A FWD Coilovers on the car which I'm willing to exchange for the right mix of an ECS system plus cash... or alternate parts as we agree.
The reason I want to do this?? While the car handles dead flat in corners,the roads in Tulsa suck -you wouldn't believe them -> they are horrible; as the city and state engineers should be executed for how bad they've let the roads deteriorate. Hence I'm want to go to the full on factory ECS system.
I'd be willing to work with someone to exchange their COMPLETE ECS system plus cash TBD- complete with electronics for the more expensive less than 1 year old JIC coilovers. They've got about 1500 miles (max) on them - and look pristine? That said these coilovers are in PERFECT condition -->> the car is not driven in inclimate weather- so they look brand new, and are less than 1 year old. Satisfaction is guaranteed.
All of this is coming out of a Gen 1 92 FWD base.
A straight ECS exchange of parts and controller etc plus cash is ideal... as an FYI I have about $1500 to $1600 in the JIC coilovers. I can look under the wheel wells and look at the color of the springs..I'm thinking they are blue (front) and gray rear; but I can double check that so you'd know the setup . I paid extra to have John at JIC work on the set to optimize their performance. For the right deal I'm willing to work with the person who want to do the deal to put a set of springs on the rear coilovers of their KG Loading rate choice, as the front springs on my FWD seem pretty close to perfect; as well as have the coilover rebound rate and dampening optimized by John after the spring change...thats a 180.00 bill on top of what I've already paid plus shipping both ways
I'd say on handling that these allow the car to approach a '09 Corvette Z06 (I've got one of those) handling in the corners - as I had did the complete the aftermarket suspension setup (short of the coilovers) from 3SX as well when the coilovers were put on.
Finally - I have to say it- as not everyone I've dealt with on Mitz forums have dealt with me honestly- having gotten scammed on at least one deal where I paid $700 for brake parts (on 3Si) which were not everything they were claimed to be....enthusiasts like me that have been doing this for 23 years know what I mean...
So...I'm a straight shooter and want to deal with the same kind of enthusiast. Bull$hit/lowballer artists expect to get ignored, so please lets not go there. I might be an older enthusiast...but I'm not addled; and I'd love to do a clean straight up deal where everyone says what they'll do, then their actions completely match their promise...heres a fact -->> mine will <<--
While I did not hammer the cretin that ripped me in feedback (as it would have been counter-productive) he knows who he is. I don't do this stuff to make money -->>> just to make my cherry 92 3000GT w/80,000 miles run better. Do me right and I;ll make you a great deal. I've got 100% feedback on eBay after 500 transactions for a reason-> no one ever gets ripped off.
I'm a coating chemist who runs a large regional paint companies corporate technical lab and QC lab...so for the right guy I could make the deal really interesting if they wanted to undercoat their car with a polyurethane or a reactive flexible epoxy system - like Ziebart etc that I designed 6 years ago. I could also supply a zinc rich primer (where the zinc is sacrificial and helps eliminate corrosion under the car and on the frame for 10 to 20 years) along with a polyurethane topcoat (in black for under the car); or in any other color needed. SInce those coatings cost $$$ I could supply them at my cost to the right deal. They are the sort of under-carriage coating that is used in the Gulf of Mexico to prevent corrosion on oil rigs.
I'll look forward to any inquiries. This is posted at the "other forum" as well.
Larry