PDA

View Full Version : For Sale Custom Polished Turbo Compressor wheel oil cap


dbest671
11-19-2014, 05:12 PM
***SOLD***

Here is a custom oil cap that is guaranteed not to leak. The base is a modified OEM oil cap. I had to carefully remove material from the center to allow the oil cap to sit flush inside the cap. It also come with a NEW OEM oil cap gasket. The nut on the underside has been staked in, so no need to worry about it falling off. The screw has been counter-bored to sit flush.

The turbo compressor wheel is a real MHI TD05 wheel. Brought it brand new and destroyed it by polishing it and grinding some material off the top. While it may sound easy, polishing a compressor wheel is almost as time consuming as a throttle body. And yes, it clears the hood.

Price: $90 shipped within the USA. I know that sounds a little high, but the compressor wheel wasn't cheap, however my polishing labor is ;).

http://i392.photobucket.com/albums/pp4/hoopb23/3si%20stuff%20for%20sale/IMG_74061280x960.jpg

http://i392.photobucket.com/albums/pp4/hoopb23/3si%20stuff%20for%20sale/IMG_74081280x960.jpg

http://i392.photobucket.com/albums/pp4/hoopb23/3si%20stuff%20for%20sale/IMG_74091280x870.jpg

http://i392.photobucket.com/albums/pp4/hoopb23/3si%20stuff%20for%20sale/IMG_74101280x1187.jpg
CoopKill
11-19-2014, 09:19 PM
damnit!!!!
dbest671
11-19-2014, 10:14 PM
May have another one available before the end of year :suspect:
CoopKill
11-19-2014, 10:37 PM
PM me details MISS!
DK77
11-20-2014, 01:08 AM
I want one too... :(
2fnloud
11-20-2014, 07:31 AM
Me too, me too!!!!
The_Kid
11-20-2014, 07:53 AM
me toooo!!!
dbest671
11-20-2014, 12:42 PM
Anybody have some compressor wheels lying around, that are not too jacked up?
2fnloud
11-20-2014, 12:57 PM
Just using the 9B compressor?
dbest671
11-20-2014, 01:02 PM
Actually the one pictured above is a TD05 16g wheel. I think the 9b wheel would look a little small, but I don't know as I've never seen one in person. Could you measure the exducer? If I could have found a cheap 9b wheel, that's what I probably would have used on my car, since I have stock turbos. But it might be more difficult to polish one LOL.
2fnloud
11-20-2014, 01:11 PM
I don't have, I was going to bug Hans on F/B but wanted to check with you first.
2fnloud
11-20-2014, 01:14 PM
from Stealth316.com

rotor is 1.57"/1.86" (TD04)

Is that what you needed?
2fnloud
11-20-2014, 01:15 PM
Found the "Exducer" there also: 1.930"
FeaRpb
11-20-2014, 01:53 PM
I can has?
dbest671
11-20-2014, 01:55 PM
I have a round base that might work better for a 9b wheel than the other 16g wheel I had mounted to it. I had to use vice grips to get it off LOL... but that's because I couldn't get a good grip on it.
CoopKill
11-20-2014, 03:01 PM
Work on that grip! :suspect:
dbest671
11-20-2014, 03:05 PM
Work on that grip! :suspect:

LOL, I had to use vice grips so my hand didn't look like it went through a paper shredder. That's why I went with an OEM base, because you won't slice and dice your hand open trying to remove it. Although, the round base makes a great theft deterrent.
DK77
11-21-2014, 03:16 AM
I'll just call Matt to see how much a DR750 compressor wheel will co... nevermind lol. Regardless of which wheel you use, if you do more I would like to get one.