PDA

View Full Version : For Sale LCDBC tach version, boost controller and ECU monitor



BlackStealth
11-14-2014, 11:52 AM
LCD Boost controller device $230 shipped to USA or Canada, with tracking number. Includes your choice of OBD1 (91-93), or OBD2/MUT cable (94-99). This works with ALL year model Stealths / 3000GTs, including AEM EMS users.

So what is it? It's both an electronic boost controller and Scanmaster 3 likes device where you can view ECU data in real time. It also allows you to hookup your WBO2 device and view your WBO2 results also. Comes with a built in pressure sensor (0-36.3psi). You can datalog both Boost, WBO2, knock and other ECU data using HHH OBD1 software, or Evoscan software.

To make this complete boost controller, you will need to purchase an inexpensive AEM / Mac valve boost solenoid (available for about $25-$30 new on ebay).

One neat feature is that you can reduce turbo boost pressure if it detects engine knock via ECU.


Options: External pressure sensor harness +$5
Options: External sensor 1 harness +$5
Options: External sensor 2 harness +$5
Options: 3D printed (black ABS) air vent adapter +$5
Options: 3D printed (black ABS) coin tray + $10

http://i782.photobucket.com/albums/yy107/blackstealth_2009/LCDBC003.jpg (http://s782.photobucket.com/user/blackstealth_2009/media/LCDBC003.jpg.html)

http://i782.photobucket.com/albums/yy107/blackstealth_2009/LCDBC004.jpg (http://s782.photobucket.com/user/blackstealth_2009/media/LCDBC004.jpg.html)

http://i782.photobucket.com/albums/yy107/blackstealth_2009/LCDBC005.jpg (http://s782.photobucket.com/user/blackstealth_2009/media/LCDBC005.jpg.html)

http://i782.photobucket.com/albums/yy107/blackstealth_2009/LCDBC007.jpg (http://s782.photobucket.com/user/blackstealth_2009/media/LCDBC007.jpg.html)

http://i782.photobucket.com/albums/yy107/blackstealth_2009/AirVent.jpg

http://i782.photobucket.com/albums/yy107/blackstealth_2009/red.jpg

http://s782.photobucket.com/user/blackstealth_2009/media/nocolor.jpg.html

http://i782.photobucket.com/albums/yy107/blackstealth_2009/DSCF1742.jpg (http://s782.photobucket.com/user/blackstealth_2009/media/DSCF1742.jpg.html)

http://i782.photobucket.com/albums/yy107/blackstealth_2009/DSCF1910.jpg (http://s782.photobucket.com/user/blackstealth_2009/media/DSCF1910.jpg.html)

Someone found inexpensive Oil / Fuel pressure sensors for $24 on ebay that can be used on the external sensors 1 or 2. Here's the link:
Pressure Transducer OR Sender 100 PSI Stainless Steel FOR OIL Fuel AIR Water | eBay (http://www.ebay.ca/itm/261260635816?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649)

BlackStealth
12-09-2014, 11:10 AM
I also have one older version without the extra Sensor 1 and Sensor 2 connections, and the serial connection is connected via cable. Only one of these models left, $200 shipped.

http://i782.photobucket.com/albums/yy107/blackstealth_2009/LCDBC007-1.jpg (http://s782.photobucket.com/user/blackstealth_2009/media/LCDBC007-1.jpg.html)

BlackStealth
01-23-2015, 09:46 AM
Bump, new inventory. 6 in stock.

spaceace60
01-24-2015, 09:45 PM
Not to sound stupid(but sure I will anyways lol!) but what would be some of the pro/cons on your unit vs. say a Greddy Ebc or other higher end boost units?? and what would be the differences and features between obd1/obd11?? I know that when using an Aem stand alone it can be setup to retard timing/lower boost or whatever all it does for added safety regarding knock ect I know you did mention something regarding knock on your unit as well,but wasn't sure exactly just what all features it had?? I will say I do really like the fact that your display can be mounted on the bottom of gauge cluster!! I think most of us are just looking for the most bang for the buck regarding any gadget!! Thanks Jim

BlackStealth
01-24-2015, 11:01 PM
Pros:
Inexpensive and uses inexpensive boost solenoids
Buzzer alarm and screen flashes red to warn you if you exceed your knock threshold
Reduce boost if you're knocking
Can be setup to enforce stock boost or low boost in case your engine hasn't fully warmed up
You can adjust boost curve per 500 rpm so there's no more boost tapering off at high rpms
If you have water/alchy injection and your fluid level goes low, this LCDBC can be setup to run low boost mode if triggered
Cons:
A little bit challenging to install into rpm gauge meter, it takes work. However, there's no stopping you from installing it into another location, ie, air vent, or unused radio din which is much easier to do.

It can communicate with all 3S cars, so OBD1 (91-93), MUTII (94-95,98-99), and MUTII over OBD2 (96-97). Majority of the menu items are identical, just minor differences when it comes to scanning CEL codes,etc. You have to choose which cable you need, or you can have both +$20. In the case of the AEM EMS, the software on the LCDBC is flashed with that supports the AEM EMS -- it's very different from the Mitsubishi. So one unit does it all.

BlackStealth
02-24-2015, 09:15 AM
Bump still available.

TKIs
02-24-2015, 11:10 PM
PM and payment sent.

arm0red1
03-09-2015, 04:10 AM
Wtb, still have dash units in stock?

Are you able to perform a cluster install for the lcd??

BlackStealth
03-09-2015, 08:47 AM
I have 3 in stock, and they can be mounted in dash, air vent, or unused radio din locations.

I've always referred customers to go to user "green-lantern" for installs.

arm0red1
03-10-2015, 11:02 PM
Whats your paypal sir - I'll take one.


**EDIT OOPS! nvm, I'll send payment**

pm with shipping address incoming.

BlackStealth
04-10-2015, 05:19 PM
Update: 2 in stock

THE_FATTIE
04-11-2015, 12:15 AM
LCD Boost controller device $230 shipped to USA or Canada, with tracking number. Includes your choice of OBD1 (91-93), or OBD2/MUT cable (94-99).

To make this complete boost controller, you will need to purchase an inexpensive AEM / Mac valve boost solenoid (available for about $25-$30 new on ebay).

Paypal: antero_jussila@yahoo.com

Options: External pressure sensor harness +$5
Options: Air vent plastic adapter +$5

Is the External pressure sensor for the boost control as well? or is that for something else?

Im looking at boost solenoids now, but if that is correct it looks like $240 for the OBD 1 version with the air vent adaptor and the sensor harness? As soon as you confirm Ill send payment.

It looks great and I cant believe I waited so long to get one of these!

BlackStealth
04-11-2015, 09:00 AM
If the harness is inserted in the front, it is used for boost control. If the harness is attached to the sides (external sensor 1 and 2), it is not used for boost control.

http://i782.photobucket.com/albums/yy107/blackstealth_2009/LCDBC004.jpg (http://s782.photobucket.com/user/blackstealth_2009/media/LCDBC004.jpg.html)

http://i782.photobucket.com/albums/yy107/blackstealth_2009/LCDBC005.jpg (http://s782.photobucket.com/user/blackstealth_2009/media/LCDBC005.jpg.html)

Yes $240 is the correct amount.

THE_FATTIE
04-11-2015, 11:50 AM
Payment sent, I can't wait to get this installed!

BlackStealth
04-11-2015, 12:17 PM
Payment received, I'll have your order shipped on Monday.

BlackStealth
05-10-2015, 10:03 AM
Currently sold out, will have more available in about a week.

BlackStealth
05-17-2015, 10:13 AM
New Inventory: 1 in stock, 9 more will be built (takes about 1.5 days to build each unit).

deemo99
05-18-2015, 12:13 AM
Payment sent!

BlackStealth
05-18-2015, 07:26 AM
deemo99: Payment received, I'll get it shipped out today.

BlackStealth
05-21-2015, 02:10 PM
Update: 2 available, and in stock.

BlackStealth
05-26-2015, 11:31 AM
Update: The 0 psi to 36 psi internal pressure sensors are no longer available and discontinued by the manufacturer. However, I did manage to find new internal pressure sensors that read from (vacuum -11 psi) to 22 psi; this will satisfy 95% of the users here. For those that need higher boost, they'll have to go with an external GM 29psi pressure sensor, or greddy 43psi pressure sensor.

New inventory: 2 in stock with (-11psi to 22psi) pressure sensors.

spaceace60
05-26-2015, 07:45 PM
New Inventory: 1 in stock, 9 more will be built (takes about 1.5 days to build each unit).
thanks for building more I almost got bummed out lol! as I thought I missed out? great unit won't be getting an over priced basic greddy boost controller when yours will do more for less!!! thanks Jim

deemo99
05-30-2015, 11:42 AM
Thanks for the quick shipping! Just waiting for my mac valve to show up. Glad I could finally scoop one of these up, sure won't miss needing the laptop to keep an eye on knock.

BlackStealth
06-05-2015, 07:40 AM
Sold out. Will have more in 3 weeks or so.

Independentspider
06-18-2015, 12:15 AM
When will these be in stock? Is there a part number for the boost control solenoid that is needed?

BlackStealth
06-18-2015, 08:42 AM
I expect delivery of circuit boards in about a week, and then I can build them.

Boost solenoid:
MAC Boost Solenoid Valve FOR Avcr Hondata S300 Kpro Vems Megasquirt Halltech | eBay (http://www.ebay.ca/itm/331322930772?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT)
Part number: 35A-AAA-DDBA-1BA

Independentspider
06-19-2015, 12:47 AM
Thanks for the part number!

Can I use this as a stand alone boost controller and wideband reader?

BlackStealth
06-19-2015, 07:21 AM
Thanks for the part number!

Can I use this as a stand alone boost controller and wideband reader?

When it's put into "OBD1 mode", then yes it can operate as an stand alone boost controller with wideband o2 display. "OBD1 mode" doesn't require an ECU handshake, where as "OBD2 mode" and "MUT" does. Otherwise if you leave it in "OBD2 mode" or "MUT mode" you'll see the screen interrupted every 60 seconds as it attempts to make an ECU connection.

2fnloud
06-19-2015, 03:22 PM
Is there any options to have your device plugged into the OBD plug and still have a bluetooth adapter connected as well?

I would like to have both your device connected plus have the ability to have speed and RPM ect, ect to the trackaddict app.

BlackStealth
06-19-2015, 03:47 PM
Is there any options to have your device plugged into the OBD plug and still have a bluetooth adapter connected as well?

I would like to have both your device connected plus have the ability to have speed and RPM ect, ect to the trackaddict app.
Unless your ECU can communicate OBD2, trackaddict app won't work. No at this moment you cannot have two OBD2 devices plugged in simultaneously. However, this gave me an idea. Take a microcontroller + bluetooth module and make it translate Mitsubishi OBD1, MUT, or OBD2 into ELM compatible OBD2 so it will work with all ELM compatible software out there. I recently replaced my car radio with a Android compatible GPS head unit, and was thinking it would be nice if I had a native Android app to display ECU data instead of going through an NTSC video route.

2fnloud
06-19-2015, 04:01 PM
I would be all about picking up this add on, I will be flash ECU in the near future.

2fnloud
06-19-2015, 04:03 PM
Unless your ECU can communicate OBD2, trackaddict app won't work. No at this moment you cannot have two OBD2 devices plugged in simultaneously. However, this gave me an idea. Take a microcontroller + bluetooth module and make it translate Mitsubishi OBD1, MUT, or OBD2 into ELM compatible OBD2 so it will work with all ELM compatible software out there. I recently replaced my car radio with a Android compatible GPS head unit, and was thinking it would be nice if I had a native Android app to display ECU data instead of going through an NTSC video route.

That would also allow my to sell a Pioneer piece that is an on-board vehicle display.

Independentspider
06-19-2015, 10:48 PM
When it's put into "OBD1 mode", then yes it can operate as an stand alone boost controller with wideband o2 display. "OBD1 mode" doesn't require an ECU handshake, where as "OBD2 mode" and "MUT" does. Otherwise if you leave it in "OBD2 mode" or "MUT mode" you'll see the screen interrupted every 60 seconds as it attempts to make an ECU connection.

Would I need the OBD1 cable if I am using it for this purpose?

BlackStealth
06-19-2015, 11:43 PM
Would I need the OBD1 cable if I am using it for this purpose?
No, you wouldn't need an OBD1 cable. In fact, you can order the LCDBC without any OBD1/OBD2 cables, and save yourself $20.

Independentspider
06-20-2015, 01:25 AM
When you have them made I will be purchasing one. I hate gauge pods.

Is there a specific wideband O2 sensor that should be used with it?

BlackStealth
06-20-2015, 08:11 AM
Innovative LC1 is good. I am hoping I receive the circuit boards on Monday, and if so, the soonest I'll have something available might be Tuesday.

2fnloud
06-20-2015, 08:18 AM
wow, is there a way to identify what processor I have? I am sure I have the faster one, but would like to confirm

BlackStealth
06-20-2015, 08:24 AM
wow, is there a way to identify what processor I have? I am sure I have the faster one, but would like to confirm
Hold down the rotary encoder button during power up, and the LCDBC will enter into Config mode. It will splash the screen with a copyright notice, and also tell you which firmware version you're using. Anything that is firmware v3.xx or higher is using the fastest microprocessor.

Independentspider
06-24-2015, 01:07 AM
Keep me updated. I'm ready to purchase.

BlackStealth
06-24-2015, 08:50 PM
Update: 4 units in stock again. Will add another 5 in a day or two.

Independentspider
06-26-2015, 12:09 AM
Payment has been sent for LCDBC and vent adaptor.

BlackStealth
06-30-2015, 07:36 AM
Today I have 6 units in stock and available for immediate shipment.

BlackStealth
07-01-2015, 07:48 AM
Inventory level now 4.

J-Groove
07-02-2015, 09:53 AM
I'm in need of a new OBD II/MUT cable, can I buy that from you?

If so, please let me know how much. Thanks!

-John

BlackStealth
07-02-2015, 10:28 AM
I'm in need of a new OBD II/MUT cable, can I buy that from you?

If so, please let me know how much. Thanks!

-John
New OBD2/MUT cable $30 shipped by airmail (2-4 weeks, no tracking). Tracked packet (1-2 weeks) add $8, or Expedited service (1 week) add $10.

BlackStealth
07-03-2015, 07:06 AM
Inventory level is now 3.

BlackStealth
07-06-2015, 07:26 AM
Sold out, new batch coming in 3 weeks.

new93TT
07-06-2015, 06:21 PM
So what's next for this Item, or is it pretty much maxed out at its potential?

BlackStealth
07-06-2015, 06:31 PM
Programming space is filled at 52%, so there's room for new stuff all the time. :)

2fnloud
07-06-2015, 07:37 PM
So how about that add on for wifi/bluetooth link to apps like track addict, or many other OBD scan apps?

Also, did you ever do anything with the gear ratio information given. And Lastly, heard grumblings of not using your device to control boost, and I remember reading other issues involving the boost breaking up at high PSI, is this an install error or something else?

BlackStealth
07-06-2015, 09:15 PM
At very high boost (30psi), it seems people need a manual boost controller to get stable boost. You're limited to whatever the electronic boost solenoid can handle. At this time I recommend using the AEM/Mac boost solenoid because it is inexpensive and works for most people, and that is what AEM uses. However, if you find a better boost solenoid, the LCDBC can make use of it.

I have this idea of perhaps making a device that attaches to the LCDBC to translate Mitsubishi OBD1 / MUT and convert it into bluetooth OBD2 -- so you can use Torque or whatever apps on your Android device.

new93TT
07-14-2015, 01:09 AM
received an I like a lot, cant wait to install this, thanks BlackStealth

BlackStealth
07-28-2015, 12:24 PM
Update: 7 units in stock.

BlackStealth
08-13-2015, 02:36 PM
The latest LCDBC edition now have Ext3 and Ext4 available through a 2pin connector at no extra cost; use this for hooking up a second WBO2, or AEM EGT. For sensors that need power (ie. oil pressure sensor, fuel pressure sensor, etc), it is better to hook those up to Ext1 or Ext2.

http://i782.photobucket.com/albums/yy107/blackstealth_2009/LCDBC1.jpg (http://s782.photobucket.com/user/blackstealth_2009/media/LCDBC1.jpg.html)

http://i782.photobucket.com/albums/yy107/blackstealth_2009/LCDBC3.jpg (http://s782.photobucket.com/user/blackstealth_2009/media/LCDBC3.jpg.html)

http://i782.photobucket.com/albums/yy107/blackstealth_2009/LCDBC2.jpg (http://s782.photobucket.com/user/blackstealth_2009/media/LCDBC2.jpg.html)

Inventory available as of Aug 13 is 7 units in stock.

Independentspider
08-19-2015, 08:31 PM
Payment sent for unit and chrome computer cable

BlackStealth
08-20-2015, 08:28 PM
Payment sent for unit and chrome computer cable
Shipped out today.

Inventory level now at 6.

BlackStealth
10-29-2015, 09:14 AM
3 units remaining.

BlackStealth
11-10-2015, 08:26 AM
Remaining: 2 units

BlackStealth
11-19-2015, 11:02 PM
1 unit remaining.

BlackStealth
11-23-2015, 06:23 PM
Sold out. I'll have parts to build more in 3 weeks.

GrabberOrange
12-06-2015, 10:56 PM
Hey BlackStealth, I think I have version 2 of your LCDBC. I'm guessing mine doesn't have the ability for extra external sensors so is the hardware able to be upgraded on mine to have the extra external sensors option or would i need to purchase this version to take advantage of that?

BlackStealth
12-06-2015, 11:25 PM
Hey BlackStealth, I think I have version 2 of your LCDBC. I'm guessing mine doesn't have the ability for extra external sensors so is the hardware able to be upgraded on mine to have the extra external sensors option or would i need to purchase this version to take advantage of that?
Tricky question to answer. The older LCDBC (version 2 hardware) can be modified to do this task if you're skilled at soldering. If this "hacked/modified" LCDBC only has to read 0-5 volt analog signals, it can cope with this task no problem. However, if this "hacked/modified" LCDBC has to provide power to the sensor (ie. oil / fuel pressure sensor) then it may over heat the voltage regulator component which is bad.

I do sell the main LCDBC box separately to make upgrades less painful. :) Send me a private message about upgrading if that interests you.

BlackStealth
02-03-2016, 09:02 AM
Update: 6 units now available.

BlackStealth
03-02-2016, 08:31 PM
Update: 4 units in stock.

Also new is 3D printed coin tray that holds: LCD display, Rotary Encoder, and Cruise control switch.

BlackStealth
04-04-2016, 03:46 PM
Update: new batch, 8 units available.

BlackStealth
08-22-2016, 08:16 AM
New batch again, 10 units are in stock.

DocHoliday
08-23-2016, 08:07 PM
Any way to install in coin tray and still keep AA switch?

Sent from my DROID Turbo using Tapatalk

BlackStealth
08-23-2016, 08:30 PM
Any way to install in coin tray and still keep AA switch?

Sent from my DROID Turbo using Tapatalk
The AA switch is massive, leaves no room for LCD screen.

2fnloud
08-23-2016, 08:42 PM
Is there a way to look at the internals of the black box to know what version I have?

BlackStealth
08-23-2016, 10:29 PM
Is there a way to look at the internals of the black box to know what version I have?
When you enter the config menu, it will briefly flash which version of software you're running. Let's start from there.

If it says firmware v3.xx then you definitely have the latest hardware, and can run the latest software.

ijsaul
08-04-2022, 05:08 PM
Hey BlackStealth - as this was the first thread that came up in my google query, I thought it best to ask here.

I have a v3.XX as confirmed by the startup menu, was there ever any firmware updates that should be applied?

From your website, it appears to go V1 updates, V2, and then V4.

Thanks, -Ian

BlackStealth
08-04-2022, 06:35 PM
v5.05 is the latest LCD software for any that LCDBC that have v3.00 as a minimum.
http://lcdbc.xp3.biz/updates/UPDATE505.zip

2fnloud
08-05-2022, 08:50 AM
v5.05 is the latest LCD software for any that LCDBC that have v3.00 as a minimum.
http://lcdbc.xp3.biz/updates/UPDATE505.zip

PAGE NOT FOUND, FILE NOT FOUND or WEBSITE NOT FOUND!!!

BlackStealth
08-05-2022, 10:28 AM
http://lcdbc.xp3.biz/updates/UPDATE508.zip

ijsaul
08-10-2022, 10:47 AM
Awesome, thank you!