PDA

View Full Version : Dyno results 15G's and Flash Ecu


twinspoolin94
06-11-2014, 11:12 AM
Chris' 1994 3000GT VR4 Getting Tuned to 418hp 380tq - YouTube (http://www.youtube.com/watch?v=WJSyiOXyrCo&feature=youtu.be)

Car is still down there so I have not driven it yet. Im impressed, what do you guys think?
Toni
06-11-2014, 11:36 AM
How much boost? What kind of fuel?

Oh for comparison. I made the exact same HP and TQ on 17psi on 93 pump.
Disrupter
06-11-2014, 11:42 AM
How much boost? What kind of fuel?

Oh for comparison. I made the exact same HP and TQ on 17psi on 93 pump.

haha I asked the same questions on the other forum.
twinspoolin94
06-11-2014, 11:44 AM
How much boost? What kind of fuel?

Oh for comparison. I made the exact same HP and TQ on 17psi on 93 pump.

Im on pump gas, havnt had a chance to talk to them yet so I am unsure of boost. Last I heard they where at 16 and made 390.
Toni
06-11-2014, 11:48 AM
When you are all said and done, make sure you ask them for a digital dyno chart. Have them email you an export. Makes it easier for me to add it to the dyno chart site.
twinspoolin94
06-11-2014, 12:37 PM
Roger that, Ill ask them!
thor'svr4
06-12-2014, 11:28 PM
it will be a ton of fun. Those turbos spool fast and make some dam good low end tq.

If you decide to push the turbos just a little harder i would recommend the w/m kit for the next mod. I know not everyone approves of water/meth inj, but i made 418awhp on 13Ts and pump 93 at 18psi, but with just the basic AEM water/meth kit installed the car jumped to 480awhp at 24psi on pump 93+w/m. I really regret not installing w/m sooner.

Just my $0.02, let us know how you like the car once you get it back!!!
NOMIEZVR4
06-13-2014, 10:53 AM
Typical numbers for boost/turbos....enjoy it. :)
VANCE
12-15-2014, 11:06 AM
I've just started rebuilding a 15g car 94 3k. I wondering where you are at now how you like them and supporting mods?
Boomer3000
12-15-2014, 11:29 AM
Twinspoolin94
Are you running a built bottom end? Or just a stock 4 bolt?
VANCE
12-15-2014, 11:46 AM
Idk yet. I bought car from a friend, his mechanic broke crank bolt in crank. If it can't be extracted without damaging the crank then I will be order a Pampena stage 2. If it can I might sell it and still get one but don't know yet till I get to that point.

Just saw you weren't talking to me!! do'h