OEM Mudflaps

[shadowcrawler13]

Hey all,

Looking for a set of OEM mudflaps. I know they're rather hard to find, but my buddy's VR4 has em and I absolutely love them. I'm sick of having brown skirts!

Send me a PM and gimme a price.

Thanks!

[vr4tune]

cherry hill mitsubishi

[CoopKill]

Not sure they are available anymore.

[2fnloud]

They are not, they are all gone discontinued. :(

[IPD]

you can buy my set for $20,000 and i'll throw in a car, turbo kit & stroker. :D

[shadowcrawler13]

lol Sorry I haven't seen this till now. Used to email notifications.
Got a quote from somebody, said "800$ for mud flaps on craigslist, comes with a 2.2 ecotec and a rusted out cavalier…hint hint, winter car, hint hint"

REALLY do want a set though...

[shadowcrawler13]

1994 Mitsubishi 3000GT Parts - Mitsubishi Auto Parts, Up to 70 % Off | Discount OEM Factory Direct Wholesale Mitsubishi Parts Warehouse (http://www.mitsubishipartswarehouse.com/parts/1994/Mitsubishi/3000GT/Base?siteid=214581&vehicleid=91794&section=BODY%20HARDWARE&group=FENDER&subgroup=EXTERIOR%20TRIM&component=Mud%20guard)

Would these be what I'm looking for? Or are these the fender liners?

I've bought from them before and had no issues.

Edit: That website normally has a decent response time, but it's been having troubles lately.

[dpartinvr4]

those aren't the right pieces on that site. I have a full set im making a mold of to sell, so i'll get back to you when I get them rolling out.

[2fnloud]

those aren't the right pieces on that site. I have a full set im making a mold of to sell, so i'll get back to you when I get them rolling out.

Will you hurry up with that already.

[J-Groove]

those aren't the right pieces on that site. I have a full set im making a mold of to sell, so i'll get back to you when I get them rolling out.

Please PM me when you're ready to start selling them. :)

-John

[shadowcrawler13]

I second that!

[Z16A]

Count me in.

[stealthee]

those aren't the right pieces on that site. I have a full set im making a mold of to sell, so i'll get back to you when I get them rolling out.

How do you intend on forming them? What material?

[dpartinvr4]

I have some abs like material ill try, or i might just do fiberglass, mold the hardware into the flap, and pot the installation holes

Sent from my DROID RAZR using Tapatalk

[stealthee]

Is it going to be like a pour mold? Poured in as two separate materials that harden after a set time?

I'm genuinely interested because molding and forming is part of what I do currently.

[dpartinvr4]

Yeah, i was working with rotational molding some stuff, but i could easily make these a pour mold.

Sent from my DROID RAZR using Tapatalk

[stealthee]

Probably the way to get the best results would be a two piece pour mold. One that clamps together and has a hole (or a few holes) on the sides to fill in. This would require more engineering, but would achieve a great quality product.

[dpartinvr4]

What it comes down to for me is whether or not to build the hardware into the flap.

Sent from my DROID RAZR using Tapatalk

[Z16A]

ABS all the way, fiberglass will break way too fast. Just my 2 cents! Maybe polyutherane would be awwsum!!

[shadowcrawler13]

I'll test em for ya if you want ;)

[stealthee]

What it comes down to for me is whether or not to build the hardware into the flap.

Sent from my DROID RAZR using Tapatalk

I would if I were you. If the mold is set up right you can place the hardware in its location. Pour/squirt the mixture into the mold and let it set. Once it is set the hardware is already in place and ready to go.


ABS all the way, fiberglass will break way too fast. Just my 2 cents! Maybe polyutherane would be awwsum!!

Fiberglass with definitely break. I don't think ABS is the way to go either. It is flexible, but still not the answer. I would go poly. You just need to play with it to find the proper durometer to use.

[dpartinvr4]

The stuff i have is called task 15, ill see how it holds up, just waiting for Chris Anderson to send the final piece I'm missing

Sent from my DROID RAZR using Tapatalk

[IPD]

I agree on polyurethane. I also think that putting hardware IN the mold is a bad idea. Too easy to strip screws, break stuff, rust out, etc. Just leave it out. About the only thing that MIGHT be worth putting IN the mold is the drilled metal strips. If you're using bolts with fender washers anyways, it won't really impact things much. And it might help add stiffness.

[shadowcrawler13]

All this talk is getting me excited for em!

[Nytron]

Do want. In.

[stealthee]

I agree on polyurethane. I also think that putting hardware IN the mold is a bad idea. Too easy to strip screws, break stuff, rust out, etc. Just leave it out. About the only thing that MIGHT be worth putting IN the mold is the drilled metal strips. If you're using bolts with fender washers anyways, it won't really impact things much. And it might help add stiffness.

I believe the hardware going in the mold would be like bushings for the holes.

[ReddVR4]

Do want some of those mudflaps!

[IPD]

I believe the hardware going in the mold would be like bushings for the holes.

That would work, although the net effect is like putting the retaining strips in the mold, so that's probably the easiest method.

[shadowcrawler13]

Seriously though, if somebody has a used set to sell I'm interested.

[Z16A]

I has paypal ready!!!

[dpartinvr4]

Well, my guy fell through on the only flap im missing, luckily the fronts are basically reversible, itll just be more work.

Sent from my DROID RAZR using Tapatalk

[Z16A]

You can do it! I need a set!!

[guido1205us]

those aren't the right pieces on that site. I have a full set im making a mold of to sell, so i'll get back to you when I get them rolling out.

You probably have then already, but if you were looking for dimensions from oem to try an exact copy, I could get the measurements for you.

http://i617.photobucket.com/albums/tt258/guido1205us/DSCN7513_zpsf5d3f26c.jpg (http://s617.photobucket.com/user/guido1205us/media/DSCN7513_zpsf5d3f26c.jpg.html)

http://i617.photobucket.com/albums/tt258/guido1205us/DSCN7516_zps86f70b76.jpg (http://s617.photobucket.com/user/guido1205us/media/DSCN7516_zps86f70b76.jpg.html)

[Keyan]

in for a set

[shadowcrawler13]

I'll officially hop in on this as well. Might as well get a brand new set.

[futurevr4man]

I could definitely be convinced to get some if they are quality

[Bleu]

Im interested. Keep in touch. Do they work for a stealth rear bumper though?

[IPD]

Im interested. Keep in touch. Do they work for a stealth rear bumper though?

yes. the bumpers bolt up the same, there's no difference. i'm running them just fine on my 2g r/t rear.

[Bleu]

Have there been any updates?

[green-lantern]

You probably have then already, but if you were looking for dimensions from oem to try an exact copy, I could get the measurements for you.

http://i617.photobucket.com/albums/tt258/guido1205us/DSCN7513_zpsf5d3f26c.jpg (http://s617.photobucket.com/user/guido1205us/media/DSCN7513_zpsf5d3f26c.jpg.html)

http://i617.photobucket.com/albums/tt258/guido1205us/DSCN7516_zps86f70b76.jpg (http://s617.photobucket.com/user/guido1205us/media/DSCN7516_zps86f70b76.jpg.html)

umm, are these true 3s flaps and are these for sale?

[Boomer3000]

Want!!!!!

[2fnloud]

No he is teasing, but he has mentioned that they are not for sale.

[guido1205us]

Teasing wasn't the intent. The dimensions are posted on the other site if someone needed them to make molds.

[ReddVR4]

Still waiting for someone to make emm :/. They'd sell like hot cakes!

[dpartinvr4]

Ill sell The three I have, I don't have time to make molds anymore

[Boomer3000]

Pm me price shipped to 63049

[Keyan]

same shoot me a price. ill make sure measurements happen.

edit nevermind i thought you meant 3 sets

[2fnloud]

Ill sell The three I have, I don't have time to make molds anymore

What one is missing Dillon?

[dpartinvr4]

One of the fronts, its flat so you could just mirror the other side on roofing rubber and have The set

[Boomer3000]

Still waiting on price. PayPal ready