1st Gen Fog Light Restoration and Upgrade

[Tensecs2fame]

Hey all, purchased a set of fog lights off another member. I don't really like how they look so I'm going to buff/polish the pitting out. I also have a set of Hid upgrades on the way for them. I think I'll also wrap the bezels in carbon.

http://i.imgur.com/n47vAVt.jpg (http://imgur.com/n47vAVt)

This is after prying the covers off after sitting 10 mins in the oven at 275 degrees

http://i.imgur.com/TxWcMos.jpg (http://imgur.com/TxWcMos)

http://i.imgur.com/DsteyBA.jpg (http://imgur.com/DsteyBA)

On order,

Norton Powertool Disc kit (has power drill attachment and a few grits)

Gordon Glass Cerium Oxide (Polish)

Felt Velor Polishing pads

DDM Tuning Hid kit

Carbon wrap

I should be receiving the means to sand and buff everything Friday. I'll have an update this weekend.

[zel-man]

subbed for updates.

I've seen several people try to buff out glass, but with varying results (yours truly included!)

[j2k4]

subbed for updates.

I've seen several people try to buff out glass, but with varying results (yours truly included!)

+1 :)

[Tensecs2fame]

http://i.imgur.com/iOMPlIV.jpg

After some time with a sanding wheel, still need to get the deeper chips out.

http://i.imgur.com/hCL4MXs.jpg

Waiting for my X-acto knife from amazon to finish up the first fog bezel

[Tensecs2fame]

http://i.imgur.com/LovNEaz.jpg

Found a good enough razor ;)

[GTOJOE]

In for updates. I woild like to convert mine to driving lights. Not much need for fog lights in straya.

Sent from my GT-I9300 using Tapatalk