PDA

View Full Version : Wanted NA TT Brake Conversion/NA Suspension Upgrade/ NA Long Tube header + exhaust/TT Plenum



lgvenable
01-09-2014, 03:39 PM
Looking to buy these parts:
Brake Conversion:
FRONT NA to TT Brakes
* AWD Brake Calipers Left+Right
* AWD Brake Rotors Pair
* AWD Brake Pads Front Set
* AWD Front Knuckles Left+Right
* AWD Front Hubs/Bearings x 2
* AWD Front Tie Rod Ends x2
* Optional: ABS Sensors x 2
* Optional: ABS Rings for half-shafts x 2
REAR NA to TT Brakes
* AWD Brake Calipers Left+Right
* AWD Brake Pads Rear Set (to match generation of calipers using)
* Do not need AWD rear rotors ( still use FWD rear rotors)
* 3SX Stainless Braided Brake Lines - FWD / NA ...if you have ss NA braided hose...
_______________________
Exhaust
Borla exhaust catback with test pipe, quad tips or a high quality substituion...no interest in single shot exhaust.
3sx long tube headers
________________________
NA Engine Parts to help breathe easier
TT Plenum
and ?? suggestions??
________________________
Suspension
Addco sway bar front and rear for 92 NA- used in good shape
endlinks for same
brand new stock motor mounts
ball joints (new)
lowering springs (1 to 1.4" not slammed)

Jimvr4
01-09-2014, 04:50 PM
I can offer two AWD front hubs. I pulled them off when I did a complete rebuild at 104K but there were no issues with them. You can have both for $80 + shipping.

J. Fast
01-10-2014, 08:12 AM
I have all of the following in good shape. Colorado car so no rust or salt exposure ever:

* AWD Front Brake Calipers Left+Right
* AWD Brake Rotors Pair
* AWD Brake Pads Front Set
* AWD Front Knuckles Left+Right
* AWD Front Hubs/Bearings x 2
* ABS Sensors x 2
* ABS Rings for half-shafts x 2
* Rear AWD Brake Calipers Left+Right
* AWD Brake Pads Rear Set (to match generation of calipers using)
* Goodridge Stainless Braided Brake Lines - NA braided hose...

$700 plus shipping sound fair?

lgvenable
01-10-2014, 05:43 PM
PM sent JFast

Unknownvr4
01-11-2014, 09:06 AM
I have a TT intake plenum no stripped bolt holes or broken tabs. You will have to use your own throttle body
I would like to get $70 plus shipping

lgvenable
01-17-2014, 12:59 PM
J.Fast - sent an email and a PM, am very interested. email me in reply at lgvenable@gmail dot you know the rest



I have all of the following in good shape. Colorado car so no rust or salt exposure ever:

* AWD Front Brake Calipers Left+Right
* AWD Brake Rotors Pair
* AWD Brake Pads Front Set
* AWD Front Knuckles Left+Right
* AWD Front Hubs/Bearings x 2
* ABS Sensors x 2
* ABS Rings for half-shafts x 2
* Rear AWD Brake Calipers Left+Right
* AWD Brake Pads Rear Set (to match generation of calipers using)
* Goodridge Stainless Braided Brake Lines - NA braided hose...

$700 plus shipping sound fair?

J. Fast
01-21-2014, 10:56 PM
J.Fast - sent an email and a PM, am very interested. email me in reply at lgvenable@gmail dot you know the rest

Took me a while to dig this stuff out but here you go...

J. Fast
01-21-2014, 11:08 PM
More pictures attached and the brake lines are: ...And literally have never been installed or opened.

http://i788.photobucket.com/albums/yy163/JFastMotorsports/Parts%20for%20sale/DSCN7702.jpg

The hub/bearings rotate free and don't make any noise. Honestly, I can't remember how many miles are on them but everything is in excellent shape and the brake pads/rotors are virtually brand new. Also, the thrust seals on one of the calipers look dry (they've been boxed up for about 2 years now). Replacement seals are around $5.

I didn't check for the ABS rings and don't know if they're in there or not. I would assume they are but will drop the price because I didn't take the time to go back the shop and check and if they aren't you can source them elsewhere. I'd just rather be rid of this stuff.

$600 plus shipping for everything I've attached is my final offer. All the calipers are Mitsubishi etched and the rotors are OEM.

lgvenable
01-22-2014, 01:39 AM
Good enough for me that closes the deal, pm me you paypal address or email me at lgvenable at gmail.com. parts look standup like you said. These do include the dust covers too? What type brake pads were you running in the calipers- stock,EBC, Carbotech, or Hawk ceramic? Shoot me a contact number and we can talk briefly, as I have a couple of questions we can clear up and complete the $$ transfer my cell nine one eight 927 04 one eight all day tomorrow-available all day. Thursday will be a bad day as I have some key meetings and phone will be off until 2 pm cst.
Larry

J. Fast
01-24-2014, 10:04 AM
Good enough for me that closes the deal, pm me you paypal address or email me at lgvenable at gmail.com. parts look standup like you said. These do include the dust covers too? What type brake pads were you running in the calipers- stock,EBC, Carbotech, or Hawk ceramic? Shoot me a contact number and we can talk briefly, as I have a couple of questions we can clear up and complete the $$ transfer my cell nine one eight 927 04 one eight all day tomorrow-available all day. Thursday will be a bad day as I have some key meetings and phone will be off until 2 pm cst.
Larry

What you see is what you get. Not sure about the brake pads... the leading numbers start with an "A" so I would suspect they are Akebono? Also, it looks like there's only 4 brake lines in the box. I'm not sure if they are uppers or lowers? Still, for $600 you're stealing it and you know it...


My paypal is fasttmotorsports@live.com


seven2O-27zero-ninetyfour14 is my number... I'll be available after 2:30PM MST today and anytime after 11:30 over the weekend.