PDA

View Full Version : C7 Carbon Discontinuing 3000GT/Stealth Product Line Up



Emilie@GZP
01-03-2014, 09:58 PM
C7 Carbon has just announced that they are discontinuing their line of body parts for the 3000GT/Stealth. What we have in stock is all that there will ever be. Get it while it lasts! High quality body parts that need very little work to fit perfect.

C7 Carbon Clearance | Product Categories | 3S Warehouse (http://3sw.co/product-category/c7-carbon-clearance/)

NOMIEZVR4
01-03-2014, 10:28 PM
no rear fenders?

sergechronos
01-04-2014, 12:51 AM
:stupid:

Had been hoping to wait and snag a set of those once this rebuild was done, but don't see them :(

Hans@GZP
01-04-2014, 08:33 AM
I will find out if they have any left. If they do, they are $375 plus shipping. I was talking to them last night and they knew they had some, but they were not sure how many. I will find out today.

stealthee
01-04-2014, 11:33 AM
Someone needs to buy their molds and continue the line up.

Hans@GZP
01-04-2014, 11:53 AM
It's a nice thought, but not a wise business decision. You're talking $25k just to get started before you produce your first part. There is a reason they discontinued the line. It's not profitable. For the time and product it takes to make one hood for a 3/S, they can make 12 ZR1 front lip spoilers. That's $650 vs. $5800. Trust me... it pains for Ryan to cut the line. It was his baby and what he built the business off of. But he has to turn a profit... and the 3/S line of products just wasn't cutting it. He needs the space to continue producing parts for Vettes. That's what makes money and I don't blame him. We'd love to purchase the molds from him, but we see the sales numbers. It wouldn't be a smart move.

green-lantern
01-04-2014, 01:23 PM
It's a nice thought, but not a wise business decision. You're talking $25k just to get started before you produce your first part. There is a reason they discontinued the line. It's not profitable. For the time and product it takes to make one hood for a 3/S, they can make 12 ZR1 front lip spoilers. That's $650 vs. $5800. Trust me... it pains for Ryan to cut the line. It was his baby and what he built the business off of. But he has to turn a profit... and the 3/S line of products just wasn't cutting it. He needs the space to continue producing parts for Vettes. That's what makes money and I don't blame him. We'd love to purchase the molds from him, but we see the sales numbers. It wouldn't be a smart move.

I think a big reason it stopped being profitable was because of him though. He went from being the best most trusted to mud in no time. I wonder if somebody else started making them if they could turn a profit. IDK, probably not worth the risk unless you could get the molds very cheap.

Hans@GZP
01-04-2014, 01:48 PM
It's $25k to get his molds. Even if you could double your money on hoods, you would need to sell over 100 hoods to break even.

People wouldn't buy the product unless they were in stock. We held $20k in inventory for 6 months and sold squat. And that was at discounted prices. More the line is discontinued and I'm selling the stuff at full retail. If people bought this stuff regularly, it would be an easier decision to buy the molds. But the sales numbers don't support the idea. Someone prove me wrong.

sergechronos
01-04-2014, 01:48 PM
It's a nice thought, but not a wise business decision. You're talking $25k just to get started before you produce your first part. There is a reason they discontinued the line. It's not profitable. For the time and product it takes to make one hood for a 3/S, they can make 12 ZR1 front lip spoilers. That's $650 vs. $5800. Trust me... it pains for Ryan to cut the line. It was his baby and what he built the business off of. But he has to turn a profit... and the 3/S line of products just wasn't cutting it. He needs the space to continue producing parts for Vettes. That's what makes money and I don't blame him. We'd love to purchase the molds from him, but we see the sales numbers. It wouldn't be a smart move.


I think a big reason it stopped being profitable was because of him though. He went from being the best most trusted to mud in no time. I wonder if somebody else started making them if they could turn a profit. IDK, probably not worth the risk unless you could get the molds very cheap.

he had the molds for sale on eBay a few months ago for several thousand dollars. Can't recall what the exact price was, but it was at least 5, I think it was 10k+. Would take a very long time to turn a profit off of it. Truthfully I wish that someone would pick up the rears and reproduce them in metal. The other parts are kinda meh, there are alternatives for the front bumpers, rear bumpers, side skirts, hoods and front fenders, no other options for rear wide body though unless you got the cash to import from Japan. That said, losing any of them would be a shame, but doubt that Cianci is destroying the molds. Probably sold them to someone, unlikely someone would pay much for them unless they intended to continue production to bring money in to help pay for it.

Hans, was 25k for ALL the molds? Or per mold? I remember he had a hood mold up individually on eBay at one time for a several thousand.

stealthee
01-04-2014, 02:00 PM
The Victory hood and 599 hood are like no other. They are still higher quality than about any other hood out there. That is why I am sad to see the line up go.

If I had the capital I would be more than willing to invest in the project, but unfortunately I am a few years away from even being able to think about that.

familyMAN
01-04-2014, 02:39 PM
It's $25k to get his molds. Even if you could double your money on hoods, you would need to sell over 100 hoods to break even.

People wouldn't buy the product unless they were in stock. We held $20k in inventory for 6 months and sold squat. And that was at discounted prices. More the line is discontinued and I'm selling the stuff at full retail. If people bought this stuff regularly, it would be an easier decision to buy the molds. But the sales numbers don't support the idea. Someone prove me wrong.

Why would he want $25k still for molds? For that, he'll just end up sitting on them. If they are out of the 3S game completely would make more sense to dump them.

sergechronos
01-04-2014, 03:02 PM
Maybe he plans on sitting on them and then if there's a slack in demand for other parts or if he gets a GB started for the 3S parts (under a different name perhaps?) that he could do a run of them. This is of course based on the assumption that the molds haven't sold yet, but at that point it still makes more sense fiscally to sit on the molds than to trash them as eventually either he can produce more or someone will offer an amount large enough to make him sell them even if it's not 25k.

green-lantern
01-04-2014, 03:36 PM
I bet he ends up selling them cheaper.......or 3SX buys them. ha

sergechronos
01-04-2014, 04:17 PM
Wouldn't doubt he ends up selling them cheaper, and I guess 3SX is as good a candidate as anyone else is to buy them, but idk that they would. I'd like to see someone pick them up and keep producing them at least, but that would be a very long term investment.

Hans@GZP
01-04-2014, 06:20 PM
He wants $20k for all of the molds. Plus freight. It's all or nothing. He won't sell just the molds for the hoods. He's putting the molds in storage until they sell.

stealthee
01-04-2014, 06:34 PM
Well good to see he isn't looking at destroying them.

Maybe I will hit the lotto then I can front the money for them and get them back in production. :lol:

sergechronos
01-04-2014, 06:58 PM
Well best of luck to him, doubtful someone would pay 20k for them for the obvious economic reasons pointed out already, you just wouldn't get that back out of it for a long time. Would assume that includes the Judgement kit as well, which is just dead weight and added expense IMO. I'd say if he were serious about not producing them anymore he would sell the molds piece by piece at lower costs to get them out rather than spending money storing them as it would get them out faster and doubtful a business will pony up for all of them for the platform. Obviously one big freight order is easier for him, but still, doesn't strike me as someone looking to move them quickly and move on from the platform.

green-lantern
01-04-2014, 07:48 PM
Well best of luck to him, doubtful someone would pay 20k for them for the obvious economic reasons pointed out already.

exactly, why I think they will go cheaper, like more 10-13k, 10-13k better than bonfire. Maybe even cheaper, I'd pass them on for 2k before destroying them.

sergechronos
01-04-2014, 10:20 PM
I still think that if they were serious on selling them, they'd be cheaper and willing to sell piece by piece. I imagine that if and when they get caught up/ahead on Vette order that they will probably make another run of some products. Unless Cianci has reached out to Duraflex or VIS or something to have them buy the molds, just don't see it happening. Can't imagine any vendor ponying up that kind of money.

Hans@GZP
01-05-2014, 12:40 PM
They will never be caught up on vette stuff. They are constantly developing new products for them because people actually buy the stuff. It's not just 3000gt stuff that he has stopped making. He discontinued over 100 different products.

Rear wide body fenders are still available. $375 plus $95 shipping.