View Full Version : Fail: Spyder Top Retract Cycle Stops N Fails After Qtr Rear Windows Retract
duke3k
10-06-2010, 02:13 AM
all,
Forgive me for being lazy..but this might be useful...so I'm going to cross link to my posts in the colorado3s.org forum..
this issue was:
in our '95 Spyder, during the top retract cycle .. the rear quarter panel windows would retract but then the sequence would stop... and the top wouldn't move..
the problem was solved as follows:
http://www.colorado3s.org/index.php/topic,548.msg6948.html#msg6948
This issue surfaced of course during the first show of the car at our local meet:
http://www.colorado3s.org/index.php/topic,543.msg6902.html#msg6902
duke3k
p.s. if you own a spyder - get the JNS Toplink interface to allow you to run the mitsu diagnostic software for the Top ECU ... there was no way I would have been able to solve this problem in a day without it.
Jimvr4
10-14-2010, 04:41 PM
One more thing to add on behalf of duke3k. Moving the reed switch fixed the issue because the magnetic field was not strong enough. Duke3k posted the solution to the Yahoo 3000Spyders group which was taking a very strong permanent magnet (salvaged from a dead harddrive) and re-magnetizing the magnet through a series of same direction strokes. After doing this the reed switch was able to move back to the original location.
Hans@GZP
10-14-2010, 07:14 PM
I guess that's good for you silly 95 owners. 96 spyders rule!!! :p
Jimvr4
10-14-2010, 07:37 PM
I guess that's good for you silly 95 owners. 96 spyders rule!!! :p
Is that from experience? :confused:
Emilie@GZP
10-14-2010, 08:19 PM
Is that from experience? :confused:
He had a 96 Spyder. You knew that...?
OhioSpyderman
10-14-2010, 08:23 PM
Different setup in the 96's Hans?
Bob.
Jimvr4
10-14-2010, 08:24 PM
He had a 96 Spyder. You knew that...?
Yeah, just didn't think he had it long enough to form an opinion :p
Emilie@GZP
10-14-2010, 08:28 PM
Different setup in the 96's Hans?
Bob.
the 96 is COMPLETELY different than my 95.
Emilie@GZP
10-14-2010, 08:29 PM
Yeah, just didn't think he had it long enough to form an opinion :p
He had that thing for over a year and 1/2. LOL
dbest671
10-14-2010, 09:00 PM
Explanation in the difference between 95 and 96 set-up?
OhioSpyderman
10-14-2010, 09:07 PM
Explanation in the difference between 95 and 96 set-up?
Also curious....
Bob.
Hans@GZP
10-14-2010, 09:24 PM
The rear quarter window position switches are different. The 95's use the magnetic switches to know if the rear quarter windows are open or closed. The 96's use the roller switches (like used on the rear trunk and header system) to do that.
Jimvr4
10-14-2010, 10:26 PM
He had that thing for over a year and 1/2. LOL
In ten years I never even knew what it looked like behind the headliner and in 1 1/2 years Hans had it ALL apart.
The rear quarter window position switches are different. The 95's use the magnetic switches to know if the rear quarter windows are open or closed. The 96's use the roller switches (like used on the rear trunk and header system) to do that.
Interesting. You must be the resident expert on top differences. Any others between 95 and 96?
Hans@GZP
10-14-2010, 10:43 PM
I had it all apart within 5 minutes of owning the car haha.
I know a lot of the plugs for the body were different that sit behind the driver side rear quarter interior panel.
The switches for the tonnau latches (to know if its open or closed) are different as well. I think I photographed the differences at one point in time. I just don't know what I did with them :p
Jimvr4
06-07-2011, 12:25 PM
The rear quarter window position switches are different. The 95's use the magnetic switches to know if the rear quarter windows are open or closed. The 96's use the roller switches (like used on the rear trunk and header system) to do that.
Hans, I have my 95 stripped down for respray and I took a pic of the Q window mechanism. I *think* this is the setup you claim was exclusive to the 96 as I have two microswitches stacked on top of each other. Please confirm.
http://jns.jimnshar.com/23c00a80.jpg
Hans@GZP
06-08-2011, 08:54 AM
I have found that they are a late 95 build as well. Did your's leave ASC around October 94 or later?
Hans@GZP
06-08-2011, 08:56 AM
Oh, and I have those magnetic reed switches in stock, along with a ton of other spyder specific parts :)
Jimvr4
06-08-2011, 01:49 PM
I have found that they are a late 95 build as well. Did your's leave ASC around October 94 or later?
Mine is August 94. It is one of the earliest cars built according to Frank's Mitsubishi 3000GT Spyder Registry (http://www.3000gtspyderregistry.com/) I suspect that my car was upgraded at some point. I found a TSB SC-96-002 titled Retractable Service Upgrade issued in May 96 - maybe that was it.
Oh, and I have those magnetic reed switches in stock, along with a ton of other spyder specific parts :)
shameless plug :lol:
Emilie@GZP
06-08-2011, 05:51 PM
shameless plug :lol:
no idea what you're talking about.... :suspect:
Hans@GZP
06-08-2011, 08:48 PM
Mine is August 94. It is one of the earliest cars built according to Frank's Mitsubishi 3000GT Spyder Registry (http://www.3000gtspyderregistry.com/) I suspect that my car was upgraded at some point. I found a TSB SC-96-002 titled Retractable Service Upgrade issued in May 96 - maybe that was it.
shameless plug :lol:
could have been an upgrade. The 2 that I have replaced harnesses on lately both had build dates of October 94 (date left ASC, not mitsu build date) and get had the newer sensor setup.
dbest671
06-08-2011, 10:23 PM
^ Shameless plug helps... do you have the weatherstripping that goes on the header piece, and down the pillars, an extremely nice one?
Emilie@GZP
06-08-2011, 11:02 PM
No molding pieces, unfortunately. We have switches, brackets, pump, motors, working harnesses, etc.
Jimvr4
06-09-2011, 04:43 PM
No molding pieces, unfortunately. We have switches, brackets, pump, motors, working harnesses, etc.
Did I remember to tell you guys how awesome you are to have Spyder stuff in STOCK?!!
dbest671
06-09-2011, 05:10 PM
Did I remember to tell you guys how awesome you are to have Spyder stuff in STOCK?!!
Yeah they have everything except the parts I need... they suck :p... just kidding em and hans.
Emilie@GZP
06-09-2011, 05:55 PM
Yeah they have everything except the parts I need... they suck :p... just kidding em and hans.
:lol: I WISH we had seals. :(
Jimvr4
06-10-2011, 10:48 AM
:lol: I WISH we had seals. :(
http://www.palmbeach.k12.fl.us/congressms/0910stuwk/meganAlphabet/Fur%20seal.jpg
Emilie@GZP
06-10-2011, 12:31 PM
Now we have them!!! Yay!! :lol:
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.