PDA

View Full Version : lmi td04 rear ic adapter??



elyria_boy
10-05-2010, 09:23 PM
ok, so lmiturbos.com has a adapter that gets rid of the bolt on rear ic pipe and lets a guy use a clamp on style coupler. but there is no picture of this thing!! so anybody got one? the site says 55$$. can you get different sized adapters? do they come with a 90 degree bend to not hit the hood? can i get a holler from somebody who is a dealer for lmi to answer this?

stealthee
10-05-2010, 09:24 PM
Stay away from LMI. They owe a lot of people, a lot of money. No one is a dealer for them anymore.

elyria_boy
10-05-2010, 09:26 PM
ok, i know lmi is a dirty word around here, just thought i would ask the question.

GTOJOE
10-05-2010, 09:58 PM
sounds like it's just a pipe with a flared end so you can use a silicone hose and customer piping. Basically the stock hard pipe cut off and flared. Just cut your stock one and leave a few inches then take to a welder and get him to weld a lip on it so the hoses won't blow off.

Chris@Rvengeperformance
10-05-2010, 10:06 PM
just cut most of the bolt ear off the rear turbo, then cut the ear off the stock hardpipe and then use a 2" to 1 5/8" silicon coupler.

Atrosity
10-06-2010, 12:19 AM
Stay away from LMI. They owe a lot of people, a lot of money. No one is a dealer for them anymore.

There is no "we" in lmi, it is just some guy named warren in a garage who purposely screwed people over. I would know that he screwed people over because I have seen what he has done first hand.

elyria_boy
10-06-2010, 01:15 AM
so i could just grind the square bolt block off the rear turbo and get a coupler to whatever size pipe i wanna run?

Lithium
10-06-2010, 01:20 AM
so i could just grind the square bolt block off the rear turbo and get a coupler to whatever size pipe i wanna run?

Yes you could but I would take the housing off and take it to a machine shop, explain what you want and they will take care of you. Expect it to cost more than 55 bucks too.

Atrosity
10-06-2010, 01:34 AM
Yes you could but I would take the housing off and take it to a machine shop, explain what you want and they will take care of you. Expect it to cost more than 55 bucks too.

At least it is done the right way. ;)

I would never pay for this garbage. People have put down good numbers with out it, why would you want it? Just replace your O ring and call it a day.

TwIzTeD_3kGt
10-06-2010, 01:34 AM
Stay away from LMI. They owe a lot of people, a lot of money. No one is a dealer for them anymore.

This. You've been warned.

Lithium
10-06-2010, 02:02 AM
At least it is done the right way. ;)

I would never pay for this garbage. People have put down good numbers with out it, why would you want it? Just replace your O ring and call it a day.

+1 No need at all

elyria_boy
10-06-2010, 12:41 PM
Yeah, I replaced my o-ring, no leaks, just wanted to run a uniform size of pipe for DIY ic piping. I don't want it to look ghetto rigged up when I do it. I will not be ordering anything from them. Thanks for the input.

Chris@Rvengeperformance
10-06-2010, 01:25 PM
yeah that's why I used a coupler on mine, I had 2" IC piping and it was a smoother transition than just having a segment of the stock pipe coupled with the 2" piping.

Jenkins
10-08-2010, 01:03 AM
Sad to see what happend with LMI and their issues but I do have their little product and I have no complaints.

Austin@STM
10-08-2010, 01:10 AM
It is not necessary, but if your making custom pipes it can be done. All i did was put a towel in the turbo to keep the shavings out, and cut the ear off with a hand saw. Then i just filed it until it was a smooth circle all the way around. a 2'' coupler is just a little bit of a stretch but fits nicely, then just throw a T-bolt on it and call it a day. I am running 23 pounds on the stockers and it hasnt blown off yet.

This is the best pic i got of it

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs074.snc4/35071_1521602528299_1481643354_31349387_632737_n.j pg

green-lantern
10-08-2010, 01:46 AM
Stay away from LMI. They owe a lot of people, a lot of money. No one is a dealer for them anymore.
This

There is no "we" in lmi, it is just some guy named warren in a garage who purposely screwed people over. I would know that he screwed people over because I have seen what he has done first hand.
This! he does know! I don't think anybody has tried to help Warren more.

Just replace your O ring and call it a day.

and this!

Chris@Rvengeperformance
10-08-2010, 11:20 AM
I left a bit of the ear on to act as a lip to help hold the coupler, but its probably overkill.

If you are running larger than stock piping I don't see how you can stay the stock setup is fine.