Elderloc
10-26-2013, 08:34 AM
So the previous owner of this car installed a pioneer single din, and it just sucks. Good thing is he used harnesses for the speakers and the deck there are a few other wires one of them is a power wire from the fuse box that went to a yellow wire on the deck, the other I'm not sure it goes to the deck as well and what appears to be 3 ground wires. Anyway I purchased a double din off ebay it came with the security code. But when I plugged it all in all I get is the amber light. When I press power no code comes up. I can put a CD in it spins ejects etc. So I thought I'll try to enter the security code with out being able to see, when I press the 4 button it beeped but I still do not get a display or sound.
Where can I find the wiring harness details. The car had the 10 disc changer option so thats one of the S-Video looking cables, there is a second one which I assume is for the amp the main harness, and then a small plug like the main harness that only has one wire. I assume this plug with one wire is the stewing wheel controls. Oh and there are two antennas.
Any suggestions as to what would cause the display to light up but not display text?
Where can I find the wiring harness details. The car had the 10 disc changer option so thats one of the S-Video looking cables, there is a second one which I assume is for the amp the main harness, and then a small plug like the main harness that only has one wire. I assume this plug with one wire is the stewing wheel controls. Oh and there are two antennas.
Any suggestions as to what would cause the display to light up but not display text?