View Full Version : I need help tuning a TT converted 3000gt with apexi SAFC.
3kgt1734
10-04-2010, 10:17 PM
Alright. Let me start off by saying I have read countless guides on the SAFC. It is freaking confusing.
I have the SAFC wired in. I just need some help understanding what settings to use for my application. I'm going to run the stock turbos at wastegate boost with stock 360cc injectors on the stock 10:1 block. I want a reliable tune, nothing over the top or anything that'll damage my engine.
Explain this to me like I'm a child. I know nothing about tuning a car.
Thanks in advance!
my car is a 1995 3000gt with the NA ECU
HLxDrummer
10-04-2010, 10:23 PM
Do you have a datalogger that allows you to see everything the ECU sees? How about a wideband oxygen sensor to see the air to fuel ratio in the exhaust? These two things help tremendously and I wouldn't really tune without them.
3kgt1734
10-04-2010, 10:28 PM
Do you have a datalogger that allows you to see everything the ECU sees? How about a wideband oxygen sensor to see the air to fuel ratio in the exhaust? These two things help tremendously and I wouldn't really tune without them.
No I do not. I've been looking at widebands. What datalogger would you recommend?
I do have a narrowband laying around I could install. I heard they're pretty worthless though.
HLxDrummer
10-04-2010, 10:31 PM
What year car is it? What year ECU? If it's a 1G I actually sell loggers cheap.
The AEM UEGO is an easy to install wideband but the LC-1 is actually more capable, easier to log, and cheaper. (Those are widebands).
3kgt1734
10-04-2010, 10:34 PM
oh damn. I thought I put all that in the first post. My bad. Its a 1995 with the NA ECU.
HLxDrummer
10-04-2010, 10:37 PM
Since it is a 1995 you need to get a "hybrid" logger. You can get these from Mirage Corp and maybe another place or two. Kind of expensive but valuable..
I have to get back to studying for the night but I'll try to check this tomorrow and help you out some more if you have more questions.
3kgt1734
10-04-2010, 10:39 PM
Since it is a 1995 you need to get a "hybrid" logger. You can get these from Mirage Corp and maybe another place or two. Kind of expensive but valuable..
I have to get back to studying for the night but I'll try to check this tomorrow and help you out some more if you have more questions.
Alright, thank you.
3kgt1734
10-04-2010, 10:43 PM
I'd really like to know how to get my car up and running with just the SAFC. I'm kinda low on cash lol. Any advice is welcome
Blurr
10-04-2010, 11:01 PM
Mirage Corp logger is a great option. I have a 94 (same "hybrid" issue) and logs very well. You'll find them for relatively cheap in the classified sections of the various 3S forums.
3kgt1734
10-04-2010, 11:03 PM
Mirage Corp logger is a great option. I have a 94 (same "hybrid" issue) and logs very well. You'll find them for relatively cheap in the classified sections of the various 3S forums.
Thanks! I'll take a look for them
HLxDrummer
10-05-2010, 11:48 AM
You need at least a logger to tune with an SAFC, I just don't see any way around it. Need something to base your adjustments off of. Just keep an eye out for deals. You can also make a cable cheap but I'm not sure how involved it is. There is a thread in advanced tech on 3Si.
green-lantern
10-05-2010, 11:56 AM
Did you install resistors for the TT injectors?
I'm with everyone else, you can't safely tune without a logger or wideband. I know you are low on cash but it would make your life much easier if you found a 1st gen ECU.
Atrosity
10-05-2010, 01:39 PM
I agree with green lantern.
1st gen ecu's are a lot easier to tune on and the datalogger kits can be bought on 1glink.com for a datalogger or you can make your own.
11secondFWD
10-05-2010, 01:54 PM
A wideband is almost a must. Aem UEGO works fine and is easy. As far as NA ECU you will be fine I ran my FWDTT with a NA ecu for years and made 400whp with it. You can get a 1g tt ecu though. I never datalogged in my life for the 3000gt. A wideband worked fine but it is helpful to log I guess (mostly to see if timing advance is crazy or not). You need resistors for the stock 360 low impedance injectors or the car wont run.
To get a baseline, you need to use the formula, stock/new -1. So 240/360 then minus 1 that will be your correction to start across the board. LIke -33%. But i will be the first to tell you it isnt going to be that simple. It wont magically be perfect. For example I had to have my idle at +50% for my car to run right and at 14.7 and I had 525's which should be way negative. So start with say -30% across the board and get a wideband to fine tune.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.