View Full Version : Anyone have a 3SX ETS FMIC?
mikeyVR4
10-04-2010, 10:07 PM
Just have some questions that haven't been answered on the other site.
I read on the description that the kit uses 2" steel piping. Would this be better than aluminum piping? I am assuming the ETS kit is 3" TB IC pipe and then 2" piping?
Also, is this kit a 3" in-and-out and bead rolled?
-Mike
vr4tune
10-04-2010, 11:08 PM
http://www.extremeturbosystems.com/ is there home site (360)263-3748. I personally think that they make the best fmic kit for our cars! Matt (snakeskiner) uses there kit on his stealth. Yes they are bead rolled at the ends, and stainless steal wont collapse like aluminum will. Its a strong well made kit you should give them a call and ask for Mike and tell them Brett sent you and said to hook you up with a deal. They are 2" till they merge before the ic then the rest is 3". The core is HUGE at 26x12x3.5 it will fill the gap in the front of your car. The core is custom fit to our car. aslo there core is less restrictive than most and is less likely to overheat than the other cores out there. Hope this helps. Brett
http://www.extremeturbosystems.com/ETS-Intercooler-Tech/t1/articles.html
This a good read about there core. They also anodize in Black, Red, Gold, and Blue,.
http://img180.imageshack.us/img180/4517/goldintercooler1.jpg
http://img180.imageshack.us/img180/8375/blackoncar.jpg
http://img402.imageshack.us/img402/3194/blueintercooler1.jpg
http://img340.imageshack.us/img340/2689/redintercooler1.jpg
then here's mine
http://i591.photobucket.com/albums/ss357/vr4tune/16g%20project/16gprojectets176.jpg
http://i591.photobucket.com/albums/ss357/vr4tune/16g%20project/16gprojectets172.jpg
http://i591.photobucket.com/albums/ss357/vr4tune/16g%20project/16gprojectets180.jpg
http://i591.photobucket.com/albums/ss357/vr4tune/16g%20project/16gprojectets181.jpg
here you can see the top of the ic through the hood latch.
http://i591.photobucket.com/albums/ss357/vr4tune/16g%20project/16gprojectets190.jpg
mikeyVR4
10-04-2010, 11:38 PM
You have helped me a TON!
Thanks and as soon as I get a refund from this other person, I will call him.
Mike
mikeyVR4
10-05-2010, 01:20 AM
http://www.extremeturbosystems.com/ is there home site (360)263-3748. I personally think that they make the best fmic kit for our cars! Matt (snakeskiner) uses there kit on his stealth. Yes they are bead rolled at the ends, and stainless steal wont collapse like aluminum will. Its a strong well made kit you should give them a call and ask for Mike and tell them Brett sent you and said to hook you up with a deal. They are 2" till they merge before the ic then the rest is 3". The core is HUGE at 26x12x3.5 it will fill the gap in the front of your car. The core is custom fit to our car. aslo there core is less restrictive than most and is less likely to overheat than the other cores out there. Hope this helps. Brett
Hey Brett,
Did you have your rear stock IC pipe polished? Just wondering since I heard that the ETS kit uses the stock rear IC pipe.
It looks really good!
-Mike
vr4tune
10-05-2010, 01:47 AM
ETS build that pipe custom for me because I have a td05 set up. They can make a one to replace the stock td04 pipe as well for pretty cheap. They will do what you want them to do for a good price.
terrets
10-05-2010, 03:32 AM
The painted FMICs are pretty sweet.
vr4tune
10-05-2010, 10:33 PM
The painted FMICs are pretty sweet. Just to clarify they are anodized not painted. I sure that's what you meant, but don't want other people to get confused.
TT Eric
10-05-2010, 10:40 PM
Brett you got a very nice car!
I received my ETS FMIC today, I didn't had the chance to see it because I'm away, I just know it's there. I ordered it black/black/black. Not that had not a good intercooling system (I have Gene's HUGE SMIC and they work pretty well, but they stick out a bit out of my 1G TT and I would preffer not).
Eric
terrets
10-06-2010, 02:23 AM
Just to clarify they are anodized not painted. I sure that's what you meant, but don't want other people to get confused.
Ya :)
mikeyVR4
10-11-2010, 09:08 PM
Brett you got a very nice car!
I received my ETS FMIC today, I didn't had the chance to see it because I'm away, I just know it's there. I ordered it black/black/black. Not that had not a good intercooling system (I have Gene's HUGE SMIC and they work pretty well, but they stick out a bit out of my 1G TT and I would preffer not).
Eric
Did you order yours from 3SX or ETS directly?
mikeyVR4
10-11-2010, 10:28 PM
Hey Brett,
Will be placing my order on Friday more than likely. I will keep you posted once I give them a call :).
-Mike
Greg E
10-11-2010, 10:45 PM
I love the black anodized core! My only gripe with ETS using steel pipes is they can rust on the inside. Stainless is the best way to go, even if its pricier.
TT Eric
10-11-2010, 10:51 PM
Did you order yours from 3SX or ETS directly?
I asked Matt (DR) if he could sell me one, but he directed me to ETS.
Eric
vr4tune
10-12-2010, 01:55 AM
I love the black anodized core! My only gripe with ETS using steel pipes is they can rust on the inside. Stainless is the best way to go, even if its pricier.
My ETS pipes are stainless steal!
Hey Brett,
Will be placing my order on Friday more than likely. I will keep you posted once I give them a call :).
-Mike
Call ETS at (360)263-3748 and ask for Mike! Tell Mike that Brett sent you and said you need the homie discount.
mikeyVR4
10-12-2010, 02:35 AM
I love the black anodized core! My only gripe with ETS using steel pipes is they can rust on the inside. Stainless is the best way to go, even if its pricier.
On the list at ETS, they are all stainless steel.
mikeyVR4
10-12-2010, 02:36 AM
My ETS pipes are stainless steal!
Call ETS at (360)263-3748 and ask for Mike! Tell Mike that Brett sent you and said you need the homie discount.
I definitely will :). Do you know if they have these in-stock or if they need to be built? I will give them a call later this week since I am booked with meetings.
Greg E
10-12-2010, 08:45 AM
On the list at ETS, they are all stainless steel.
Ah no shit! I take back my comment then. Their evo kits used to be made of a lower grade steel so I assumed these were too.
vr4tune
10-12-2010, 01:45 PM
I definitely will :). Do you know if they have these in-stock or if they need to be built? I will give them a call later this week since I am booked with meetings.
They make them in house. I do know that they have all the piping and cores to make them in stock. The whole kit is custom made, even the intercooler core is custom made to fit behind the crash bar by curving the end tanks. here is a pic of the cores before they are made.http://img381.imageshack.us/img381/9742/etsshoppictures022bc3.jpg
The shop is only about 40 min. drive from my house, I have been there many times. they are some of the coolest people in the business.
mikeyVR4
10-12-2010, 06:06 PM
Excellent thanks!
Yah I was mostly wondering on the turn around time if they need to make these. I see that 3SX has a 2-4 week wait time but I will be giving ETS a call.
I also like that they are in the West Coast so the shipping will be lower for me compared to 3SX shipping price for this.
YoshiBishi
02-09-2011, 04:11 PM
Sorry for reviving an old thread... so these fit on a 92 without removing the crash bar?
vr4tune
02-10-2011, 06:15 AM
Yes they will fit. I still have my crash bar. Their kit was first prototyped on a first gen. So you would be good to go.
vr4tune
02-10-2011, 06:35 AM
Read this link it will help with your smic vs fmic debate. One more thing their kit won't serge.
Link--->Articles (http://www.extremeturbosystems.com/ETS-Intercooler-Tech/t1/articles.html)
mb7050
02-10-2011, 06:58 AM
ETS makes good stuff thats sure. BUT there are no flow numbers just internal volume wich doesnt rely mean much.
the flow path in ets fmic isnt that great basically 12x3.5 or 6x3.5 x 2 and then its 26" long wich is a good thing for cooling but not for flow. I ordered my sidemounts from bell the the flow path is 8.1x6 x 2 so they should not hurt flow much they are rated 911 cfm each (1811 cfm) combined . I would loove to find cfm ratings for this fmic even for the core !
Chris@Rvengeperformance
02-10-2011, 10:16 AM
The guy with dr750s and the ets kit has a lot if surging in the upper gears.
Sent from my DROIDX using Tapatalk
mb7050
02-10-2011, 11:04 AM
The guy with dr750s and the ets kit has a lot if surging in the upper gears.
Sent from my DROIDX using Tapatalk
under heavy load ?
Chris@Rvengeperformance
02-10-2011, 11:12 AM
No same light/med throttle pulsing a lot of us have.
If the ets setup was a 100% fix I'd buy one.
Sent from my DROIDX using Tapatalk
mb7050
02-10-2011, 11:50 AM
ok thats what i thought .
mb7050
02-10-2011, 11:52 AM
is this the Eric guy who had Gene sidemounts before ?
Chris@Rvengeperformance
02-10-2011, 02:14 PM
is this the Eric guy who had Gene sidemounts before ?
his does some too, but the guy I'm referring to is the guy JasonY helped out.
mb7050
02-10-2011, 03:34 PM
his does some too,
Do you know did he have any surging problems w gene smics ?
FeaRpb
02-10-2011, 03:34 PM
I myself will be going to ETS for my fmic kit. I know they will do great work and match what my specs are.
Chris@Rvengeperformance
02-10-2011, 04:14 PM
Do you know did he have any surging problems w gene smics ?
I don't want to speak for him, but IIRC he didn't.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.