View Full Version : What's going on with Greg and the next version of Chrome.
Greg E
10-02-2013, 02:07 PM
Been getting a LOT of PMs lately asking for an update or even a release date for the next version of chrome. Figured it is easier to start a thread than keep answering messages.
Chrome development pretty much came to a halt when I sold my 98 VR4. Jesters helped me out a lot since then but he too got busy with job, family, ECU orders and a broken car.
This whole time I've been trying to get another vehicle going to use as a test car but due to many many delays on parts and even my own indecisiveness about how to build it, I abandoned hope that car will be running this year.
Around the time of NG I picked up another vehicle (99 SL) to convert to TT and use that car as a test platform. Over the last couple months while building that car I changed my mind (again) and decided to use the VR4 as the test car.
This is what I've been working on the last few weeks and it's nearly completed. After the car is road legal I will be reopening my beta ROM files and getting back to work on them as well as alternate MAF and BCS testing.
To save from disappointment, I'd rather not discuss future features of the next ROM because I'm not sure exactly how far I'll go before public release. What is tested and working is switchable maps. That's all I'm gonna say right now.
Being that we are coming into fall and expecting snow in the near future, I can't give you guys a projected release date. Once salt is laid down, the cars are parked until spring. Last year we didn't get snow at all so maybe I can be working on this well thru Christmas again but who knows.
One other thing that I wanted to mention is that I'm starting a list of preferred "Chrome tuners" whom you guys can take your cars to for tuning if you feel you aren't capable of doing it yourself. There's only 3 people on this list right now (Adam, Ray and myself) but I am recruiting others.
If you would like to become a part of this list, beware that I am quite strict about who I trust with this title but I'm more than willing to work with you to get you comfortable enough to tune chrome like a pro. There's no cost to be on this list either. I get my $$ thru donations and the more people using chrome, the more donations I get. :)
I'm not looking for beta testers so please don't ask. That didn't work out well with the last version.
ICPREY
10-02-2013, 02:57 PM
One other thing that I wanted to mention is that I'm starting a list of preferred "Chrome tuners" whom you guys can take your cars to for tuning if you feel you aren't capable of doing it yourself. There's only 3 people on this list right now (Adam, Ray and myself) but I am recruiting others.
Hmm, I guess that's one of the good things about my possible move to PA. I'll be in the Coatesville area if it happens (most likely). I might have to hit you up to tune my slow 99 or at least show me some pointers.
Greg E
10-02-2013, 03:02 PM
You'll literally be 10 min from me!
mb3000
10-02-2013, 03:15 PM
I'd like to be on the list just to get a better understanding of Chrome itself. My prior experiences tuning a 3/s are with the ARC2 and AEM EMS V2.
Greg E
10-02-2013, 03:22 PM
Do you own a tuner shop and/or tune customer cars on a regular basis?
mb3000
10-02-2013, 03:46 PM
No, Chris and 3SX pretty much take care of the Carolinas as far as shops go. I was just wondering if you were offering something similar to what AEM does, basically a seminar that teaches you how to navigate, use, and understand the EMS. Something that anyone can go to.
Greg E
10-02-2013, 03:53 PM
I was just talking with Adam about buying a gopro and making a few better tutorials and hosting them on YouTube. Funny you mention that.
Trevor425
10-02-2013, 04:06 PM
ooh, i would love that! ^^
ICPREY
10-02-2013, 05:53 PM
You'll literally be 10 min from me!
Nice! The crappy part is I have to drive the Vr4 all winter and I'm not looking forward to the winter or snow . I have a Gopro you can borrow, but I won't be up there until probably late Oct-mid Nov.
sergechronos
10-02-2013, 09:12 PM
Thanks for the update Greg, always good to know what's happening with Chrome and your progress. Saw the picture of the progress on FB of the car, looks great. Exciting to see what comes of this, and especially excited for the switchable maps.
stealthify
10-03-2013, 07:48 AM
Nice update Greg! I look forward to seeing what you do next.
sergechronos
10-09-2013, 09:42 PM
Can't believe it hasn't been asked, but did you make more progress on plans for your own MAF or give that up?
Greg E
10-09-2013, 10:52 PM
Can't believe it hasn't been asked, but did you make more progress on plans for your own MAF or give that up?
The MAF setup I was working on isn't going to work. It involved using the new LS7 slot style MAFs in a custom housing and a special cable to slow the GM MAF frequency down into a range the flash ECU could work with.
...but unfortunately there were several issues. First was the voltage draw causing an offset to all the other sensors on the motor. Then there's the issue of it being a 12V sensor instead of a 5V one. Then there's the issue of it sending out a different shaped frequency... Lots of issues.
The good news is the LS3 5 wire 3.75" MAF with my cable plugged directly into the ECU (without a MAFT) works perfectly IN DRAW THRU. More to come with that. The only issue with this setup is sourcing the parts to make it true plug and play. I don't want to make you guys cut up the MAF harness.
Lots and lots and lots of stuff has been going on behind the scenes.
anyonebutme
10-09-2013, 11:05 PM
I don't want to make you guys cut up the MAF harness.
talk to turbobob from full throttle performance to see where they source their plugs that plug into the stock MAS harness.
sergechronos
10-09-2013, 11:08 PM
The good news is the LS3 5 wire 3.75" MAF with my cable plugged directly into the ECU (without a MAFT) works perfectly IN DRAW THRU. More to come with that. The only issue with this setup is sourcing the parts to make it true plug and play. I don't want to make you guys cut up the MAF harness.
Eh well, progress is progress. So at this time, best options are Montero 482/Evo 399, or doing MAFT/ARC2? Actually just picked up a 482, don't particularly want to get away from draw thru, but always nice to know what's coming down the pipe and potential future upgrades/changes to account for.
Lots and lots and lots of stuff has been going on behind the scenes.
Ignore the man behind the curtain?
Greg E
10-10-2013, 08:17 AM
At this time the BEST option is the old version MAFT ( the one with the knobs) and the 3.75" MAF in draw thru. Some fine tuning still needs to be done after you get it setup but it works quite well. I haven't release much info about it because it's counter intuitive to my own setup in the works.
Ray has tuned nearly a dozen cars with this setup with great success. Unfortunately he's reported some issues with the latest revision of the box. I've been trying to get ahold of TurboBob about this and many other things.
Keyan
10-10-2013, 10:51 AM
The good news is the LS3 5 wire 3.75" MAF with my cable plugged directly into the ECU (without a MAFT) works perfectly IN DRAW THRU. More to come with that. The only issue with this setup is sourcing the parts to make it true plug and play. I don't want to make you guys cut up the MAF harness.
another reason for me to convert back :) and the chance of one day selling the MAFT is another bonus.
Hopefully one day in the future it will be a publically released option. Until then; I will convert back :suspect:
LeRoyDL
10-10-2013, 11:07 AM
Greg,
What is the reasoning for 3.75 over the 3.5? I am guessing draw though is recommended b/c the 3.75 seems to leak in in blow through?
I curbed my 3.75 in favor of the metal body on both sides of the 3.5 years ago. Should i be considering a certain amazon order presently?
Will your setup be taking advantage of the 3.75's iat? IIRC the maft didn't and just reports a static temperature to the ecu.
Greg E
10-10-2013, 03:41 PM
The 3.75" MAF can count a lot more air than the 3.5". At the same time, I doubt anyone will have issues with a 3.75" intake being restrictive enough to create a vacuum in the intake tubes.
I keep going back and forth about how to deal with AIT correction. More real world testing will be needed to see if its even necessary. When I last left off, it was without any AIT correction.
llabmik2
10-10-2013, 06:01 PM
The 3.75" MAF can count a lot more air than the 3.5". At the same time, I doubt anyone will have issues with a 3.75" intake being restrictive enough to create a vacuum in the intake tubes.
I keep going back and forth about how to deal with AIT correction. More real world testing will be needed to see if its even necessary. When I last left off, it was without any AIT correction.
FWIW....different cars and motors
I tune a lot of R53 MINI's on Vipec's, these are the ones with M45 superchargers, you get a pulley on them and they are nothing but a heatgun after that, and we really see no issues with IAT till about 60C+. AFR hangs in there pretty well, maybe a .3 swing, and timing can stay the same till about then....once you cross that 60C range (140ish F) temp, then things change. Timing needs to be pulled and fuel needs to be added (to a point as you will run richer anyways with a higher IAT). This is of course on pump 91 octane. On E85 IAT fuel and timing maps just get changed to 0.
My Evo doesn't run a IAT correction when on 91 pump....
It seams like the only time its really needed is for startup, especially when using E85 as on those COLD mornings you need to dump it into the cyl. to get it to start. Or if your setup is very inefficient and your IAT's are sky high.
Keyan
10-10-2013, 09:29 PM
the iat reads temp pre-turbo anyway.
Greg E
10-10-2013, 09:44 PM
With the AIT scaling and AIT correction tables in chrome you can install any 5V AIT sensor and have it read and compensate based on post IC temps.
LeRoyDL
10-11-2013, 01:48 AM
Are the perks of blow through out weighted by some negative?
Greg E
10-11-2013, 07:45 AM
Are the perks of blow through out weighted by some negative?
Rough on/off throttle drivability and erratic idle.
mb3000
10-11-2013, 10:20 AM
I've got to ask, is there any possible way you can give an approx. date on the 3.75" MAF running without the MAFT?
Greg E
10-11-2013, 10:51 AM
Nope.
Right now the hold up is sourcing parts to assemble the cables.
AdamVR4
10-11-2013, 12:09 PM
Rough on/off throttle drivability and erratic idle.
My laughably rock solid 1000 rpm idle, and very smooth transition into/out of throttle disagree with your generalization. Last time I let a draw thru z06/maft owner drive my car, the first comment he made was how smooth it was.
Again, I picked up 3-5 mph @ 130 mph traps when I went from 3.75" maf + stock intake tubes (they're garbage) to open turbos (not ideal) and LT1 maf in blow thru. What evidence do you have to claim there won't be pressure drop thru a z06 maf + stock bubble + aftermarket tubes?
Honestly, the only thing I miss about draw thru is it was easier to pressure test.
mb3000
10-11-2013, 12:24 PM
Nope.
Right now the hold up is sourcing parts to assemble the cables.
You could use (or tell people to buy) one of each: DSMChips.com | DSM ECU Chips Enchanced by Keydiver (http://www.dsmchips.com/viewproduct.php?id=49) and GM 5 Wire MAF Pigtail to Fit LS3 LS7 MAF | eBay (http://www.ebay.com/itm/like/250733707138?lpid=82)
Simply cut off the side of the DSMchips one you don't need and wire in the appropriate wires from the GM MAF Pigtail.
Greg E
10-11-2013, 12:30 PM
You could use (or tell people to buy) one of each: DSMChips.com | DSM ECU Chips Enchanced by Keydiver (http://www.dsmchips.com/viewproduct.php?id=49) and GM 5 Wire MAF Pigtail to Fit LS3 LS7 MAF | eBay (http://www.ebay.com/itm/like/250733707138?lpid=82)
Simply cut off the side of the DSMchips one you don't need and wire in the appropriate wires from the GM MAF Pigtail.
I've been down that road. Tom has been thinking about getting out of the business and asked me not to steer the 3/S platform his way.
mb3000
10-11-2013, 12:33 PM
Damn. Seems like a lot of small vendors closing up shop recently.
Greg E
10-11-2013, 12:38 PM
My laughably rock solid 1000 rpm idle, and very smooth transition into/out of throttle disagree with your generalization. Last time I let a draw thru z06/maft owner drive my car, the first comment he made was how smooth it was.
Again, I picked up 3-5 mph @ 130 mph traps when I went from 3.75" maf + stock intake tubes (they're garbage) to open turbos (not ideal) and LT1 maf in blow thru. What evidence do you have to claim there won't be pressure drop thru a z06 maf + stock bubble + aftermarket tubes?
Honestly, the only thing I miss about draw thru is it was easier to pressure test.
I laugh at your 1000rpm idle. Get it down to 750 then we can have a serious conversation.
The rough throttle transition is intermittent between test vehicles and still being looked into. KYLightning reports great street ability with no hick ups but he is also running a smaller GM MAF which has better resolution at low airflow than the 3.75" MAF.
As for evidence of a 3.75" MAF NOT being a restriction, hook a vac gauge to your intake pipe. Measure the draw at 25psi with MAF and without. Report back. I'm sure there will be a point where it will be an issue but I haven't found it with any TD04 turbo yet (which is what 90% of the people here run). Please humor me and actually do this test before posting any theories. I know you're not running TD04s so that's why I asked you to try this.
Also, are you running with your narrowbands unplugged?
AdamVR4
10-11-2013, 01:52 PM
I laugh at your 1000rpm idle. Get it down to 750 then we can have a serious conversation.
The rough throttle transition is intermittent between test vehicles and still being looked into. KYLightning reports great street ability with no hick ups but he is also running a smaller GM MAF which has better resolution at low airflow than the 3.75" MAF.
As for evidence of a 3.75" MAF NOT being a restriction, hook a vac gauge to your intake pipe. Measure the draw at 25psi with MAF and without. Report back. I'm sure there will be a point where it will be an issue but I haven't found it with any TD04 turbo yet (which is what 90% of the people here run). Please humor me and actually do this test before posting any theories. I know you're not running TD04s so that's why I asked you to try this.
Also, are you running with your narrowbands unplugged?
My BISS is not bottomed. When I lower it for emissions testing ill get you a pic. Until then, ill heed Monett's advice and keep the idle at 1000 rpm's because of the way I use my car.
To perform that test, are you going to send me aluminum intake tubes and a z06 MAF? If I'm using stock tubes I already have hard evidence that its a significant downgrade from what I have.
No, the NB's are installed and functional. Why wouldn't they be?
Sorry for the OT. I'll see myself out.
2fnloud
10-11-2013, 01:54 PM
Nope.
Right now the hold up is sourcing parts to assemble the cables.
Greg, could the conversion harness that allowed the evo maf to plug into the original harness be converted?
Greg E
10-11-2013, 02:21 PM
My BISS is not bottomed. When I lower it for emissions testing ill get you a pic. Until then, ill heed Monett's advice and keep the idle at 1000 rpm's because of the way I use my car.
To perform that test, are you going to send me aluminum intake tubes and a z06 MAF? If I'm using stock tubes I already have hard evidence that its a significant downgrade from what I have.
No, the NB's are installed and functional. Why wouldn't they be?
Sorry for the OT. I'll see myself out.
I do actually have some intake pipes. The only way to measure intake restriction is the vac test like I mentioned. I can think of a number of reasons why you saw gains in switching setups but I would like to see the actual intake restriction before agreeing this was the cause.
As for idle, you can make it whatever you'd like, just don't try to argue that it works perfectly because you've raised it to operate beyond the capabilities of the ISC and the ECUs target idle correction capabilities.
I was just simply curious if you disabled the NBs as in my testing, the motor runs much smoother with a good tune and closed loop disabled. Also gets significantly better gas milage!
Also please don't mistake my posts as " blow thru is bad and won't work". Anything can be made to work if enough time is put into it. I just haven't put the time into it. :)
anyonebutme
10-11-2013, 07:54 PM
Don't forget he has cams.
KeithMac
10-13-2013, 06:59 PM
I run a 3" maf in blow through with good idle on PTE 1200's. No stock O2 correction but it holds afr extremely well/ consitantly.
It depends on the piping up to the maf as much as anything, they're picky. You may want to try clocking the maf 90 degrees on problematic cars?.
My maf still has the air straightening gauze in there and I run a Maft-t.
Greg E
10-13-2013, 07:19 PM
I run a 3" maf in blow through with good idle on PTE 1200's. No stock O2 correction but it holds afr extremely well/ consitantly.
It depends on the piping up to the maf as much as anything, they're picky. You may want to try clocking the maf 90 degrees on problematic cars?.
My maf still has the air straightening gauze in there and I run a Maft-t.
Even in draw thru the screens make a big difference in terms of keeping a steady/consistent air count.
Also having an OEM MAF vs some of the knock offs too.
Stealth_RT
10-13-2013, 08:53 PM
Any luck on getting EvoScan 2.7 to work for us? Evo owners tell me its WAY better than 2.9, for showing real time graphs of what various parameters are doing.
Greg E
10-13-2013, 09:24 PM
Any luck on getting EvoScan 2.7 to work for us? Evo owners tell me its WAY better than 2.9, for showing real time graphs of what various parameters are doing.
I have been using 2.7 for the new version of chrome. It wouldn't be too tough to make one for the current version.
How about I work on that during the week. It's a matter of hours to write the XML but it needs testing.
Streamln1
11-26-2013, 02:48 AM
Have you tried other 'slot' style mafs other than the GM? Theres a hitachi sensor that Nissan uses. I put quite a bit of research into these a while back, they might be limited to reading flow in a 3" tube, but I would still like to see if one could be made to work. If we could find one that used a 5v signal it would be a start
Streamln1
11-26-2013, 02:58 AM
Mass Airflow Sensors (http://www.pmas-maf.com/mass-air-sensors.php)
From what I understand here, would it not just be a matter of coming up with a scaling table for one of these? I would love to give it a shot.
Greg E
11-26-2013, 09:04 AM
Have you tried other 'slot' style mafs other than the GM? Theres a hitachi sensor that Nissan uses. I put quite a bit of research into these a while back, they might be limited to reading flow in a 3" tube, but I would still like to see if one could be made to work. If we could find one that used a 5v signal it would be a start
Yes I have tried.
http://i.imgur.com/xe3R0hB.jpg
In a nutshell, it doesn't work. :(
Streamln1
11-26-2013, 10:54 AM
Did you try one of those 5v sensors like I posted? It claims to have high resolution in smaller tubes, it may be a bit of an issue in that setup in your pic since its a short tube, i was thinking of going in line with the i/c pipe right before the tb so its a long strait run.
Greg E
11-26-2013, 11:40 AM
Did you try one of those 5v sensors like I posted? It claims to have high resolution in smaller tubes, it may be a bit of an issue in that setup in your pic since its a short tube, i was thinking of going in line with the i/c pipe right before the tb so its a long strait run.
There's issues with "blow thru" sensors. Mainly life expectancy.
I've come up with solutions. Just not going to post about it till further testing is done.
CoopKill
11-26-2013, 12:05 PM
I have been using 2.7 for the new version of chrome. It wouldn't be too tough to make one for the current version.
How about I work on that during the week. It's a matter of hours to write the XML but it needs testing.
Has your limited allotment of time allowed for this yet sir?
Greg E
11-26-2013, 12:50 PM
Has your limited allotment of time allowed for this yet sir?
I forgot all about it. Sorry.
Streamln1
11-27-2013, 12:20 AM
Cool, looking forward to see what you come up with. Im going to be installing my engine here soon and once I get thru the break in period its going to be tuning time. I am definitely going no maf before the turbos just to minmize the intake path restrictions, also just because it looks cool. If I can totally eliminate the need of any sort of piggyback to use different maf setups that would be great.
NOMIEZVR4
03-24-2014, 02:04 PM
Any developments on this?
Currently running stock intake tubes on my evoIII's which I know is robbing me of spool/power...:(
Greg E
03-24-2014, 02:54 PM
Yes. Quite a bit. Was planing on sharing everything in the next few weeks.
CoopKill
03-24-2014, 03:04 PM
Yes selfish on my part, but can you make that days instead of weeks?
Curiosity kills the Coop!
Sent from the Man Cave!
*\( ^o^ )/*
sergechronos
03-24-2014, 03:05 PM
can you make that hours instead of weeks?
Veganism kills the Coop!
Fixed those typos for you chief. :D
Sent from my XT1080 using Tapatalk
Greg E
03-24-2014, 04:22 PM
I gotta make sure the stuff works before I share it with you all. :)
NOMIEZVR4
03-24-2014, 04:35 PM
will it work with my SD pipes that I have lying around or will I have to sell em? :D
;)
sergechronos
03-24-2014, 04:49 PM
I gotta make sure the stuff works before I share it with you all. :)
Nah man, just take a page from EA's book and release stuff without bug testing ;)
In all seriousness, glad to hear that there are updates coming and that you actually test it out.
CoopKill
03-24-2014, 05:13 PM
Fixed those typos for you chief. :D
Sent from my XT1080 using Tapatalk
Not yet, but it may be trying... :p
HellBringer
03-24-2014, 07:48 PM
http://i282.photobucket.com/albums/kk252/AHPowelson/526085_3510357670355_1014244568_33087528_967172913 _n_zps4976a708.jpg
Seemed apropos..
Streamln1
03-25-2014, 01:17 AM
Lmao!
Disrupter
03-25-2014, 12:40 PM
Lol I just picked up a gm maf and maft v2.... now everything just got put on hold until we get more info yay!
CoopKill
03-25-2014, 02:37 PM
Heh, I have a montero, gm, and maft waiting for insertion when better info becomes available. Going to worry about getting everything else going before the maf issue is tackled.
Disrupter
03-26-2014, 08:22 AM
Also looking forward to be able to toggle through maps, would be awesome to have a pump gas tune and a pump gas+meth tune. I have been running the evo maf without any issues. I purchased some Dejon blow-thru pipes a long time ago for a steal. I think it was time I use them.
Disrupter
04-08-2014, 08:44 AM
http://31.media.tumblr.com/tumblr_lvyesuSKLz1qg40ybo1_500.gif
EvanH
04-17-2014, 06:49 PM
I have been reading, but cant find anything, and didnt want to start a whole new thread. Can you use wideband O2 sensors in the stock locations with this ecu?
Chris@Rvengeperformance
04-18-2014, 03:42 PM
They are too close to the turbine anyway and will burn up.
anyonebutme
04-18-2014, 05:41 PM
I ran mine in the stock rear location for a couple years, never tested back to back for the difference, but temp does affect the reading somewhat. If you're up against the wastegate all the time the downpipe will get super hot.......so it's life will probably depend more on how you drive and not it's exact location.
Chris@Rvengeperformance
04-18-2014, 06:15 PM
hmm I used an ebay downpipe once that had an extra bung on the rear pipe, maybe 2 inches from the flange where it connects to the o2 housing and killed it in about 6 months. who knows, I'm sure that setup was rich and possibly burning some oil, although I never had to add any.
donniekak
04-18-2014, 06:25 PM
They are too close to the turbine anyway and will burn up.
I've run wide bands in the stock location for years without issue. In fact, aem uses the same sensor found in many newer cars, some of them turbo. It's often placed only a few inches from the exhaust port.
Greg E
04-19-2014, 07:27 AM
I've run wide bands in the stock location for years without issue. In fact, aem uses the same sensor found in many newer cars, some of them turbo. It's often placed only a few inches from the exhaust port.
As long as the sensors heater is working, it should stay alive a good long while.
3000gttom
04-20-2014, 01:16 PM
hey greg do you know what role the sensor on the cam gear plays? timing of anything?
Greg E
04-20-2014, 04:00 PM
They tell the code which stroke a cylinder is in. It's for IPW timing actually.
3000gttom
04-21-2014, 01:44 AM
They tell the code which stroke a cylinder is in. It's for IPW timing actually.
I want to put intake cams on to the exhaust side of my n/a, this will require lining the gear not on the stock markings...
i have chrome, so could i possibly just change what timing the computer expects to see to correct for the gear being in a different position?
So does Ray have any of the new stuff? Primarily the switchable maps, my car is at his shop right now and I'd love for him to be able to set that up so I can switch back and forth between pump and E85 on the way home.
NOMIEZVR4
05-10-2014, 12:48 PM
Bump...
Any details/updates on the maf developments...?
Got my a$$ handed to me by an evo last night..:p Hoping to get revenge before the season is over...:D
Keyan
05-11-2014, 12:05 AM
yeah, whenever this officially gets announced, I want to be in line.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.