DrGonzo
09-12-2013, 07:02 PM
http://hydro.gonzoinc.com/GonzoInc_Hydro_Logo.png
http://hydro.gonzoinc.com/
So I finally got the bulk portion of the site online. I still have a few more things to add in but it is completed enough to make the announcement.
I will start to take orders now on a one person at a time basis. I do not intend to get swamped with peoples parts and not be able to deliver in a timely manner. I am the only one doing this and I work a full time job so these dips get done in my free time. Parts such as valve covers and plenums can take 2-3 weeks, maybe sooner depending on the amount of work needing to be done to clean it and prep in.
My tank is only big enough right now to handle valve covers and plenum sizes. Anything larger will have to wait until I get a larger tank which may be a year or so as I am planning on building a garage soon.
Pricing for parts is as follows and based off of you sending me a core to dip:
Valve cover - $100.00 + Shipping The cover must be somewhat clean. If you send me a valve cover that looks like the blow one I will charge more due to the additional worked needed to clean it out. A cover like this needs to go through the blasting cabinet to clean out the build-up which means the oil baffles need to be removed and later replaced. I valve cover like this you are looking at $150.00 for me to even touch it.
http://hydro.gonzoinc.com/images/Sludge_Valve_Cover.jpg
If the valve cover looks like this one, then I do not need to blast it. So I won't need to remove the baffles and no additional work needs to be done:
http://hydro.gonzoinc.com/images/Clean_Valve_Cover.JPG
Plenums - $120.00 + Shipping Only the top side of these is dipped since it is almost impossible to 360 degree dip these. I will tape off where the pattern ends and clean it up to have a smooth transition line when the pattern ends and the base coat begins. I can back fill the letting on the plenum for an additional $10.00 in any standard color you want.
Timing Covers - $60.00 for both + shipping Due to how these have to be dipped it is best to not use a tight straight pattern like carbon Fiber. I have to change directions during the dip which will change the direction of the weave. A cross hatch pattern would probably work OK.
Spark Plug Covers - $30.00+ Shipping The black stock covers cannot be done. I have tried multiple times and each time air gets caught due to the concave shape. Best to only have flat aftermarket plug covers done like the ones I did for Ninja Performance.
Plastic trim and engine parts - Let me know what you want done and I'll work up a price. plastic parts are easier to do as no real prep work needs to be done on them.
All parts are painted in a High Temp Ceramic paint good up to 500 degrees. All parts will get a clear coat to protect the graphics in your choice of Gloss or Satin. Gloss Clears get cut and polished at no additional charge.
All raised lettering on covers and plenums get sanded down to the aluminum. if you want a valve cover shaved let me know as I can shave the lettering off for additional cost.
If you have other non-3S parts you want dipped let me know and I'll work out a price.
I will not ship back a part if I see any issues with the way the graphic laid down. I will re-dip the part as needed until the part is how it should be. I will not mail back crap!!
So lets start a list here of who is wanting parts done. Please add yourself to the list and let me know what you want done. The list starts with those who IM'd me earlier about getting parts done:
1. DCIV
2. AdamVR4
3.
4.
5.
6.
7.
http://hydro.gonzoinc.com/
So I finally got the bulk portion of the site online. I still have a few more things to add in but it is completed enough to make the announcement.
I will start to take orders now on a one person at a time basis. I do not intend to get swamped with peoples parts and not be able to deliver in a timely manner. I am the only one doing this and I work a full time job so these dips get done in my free time. Parts such as valve covers and plenums can take 2-3 weeks, maybe sooner depending on the amount of work needing to be done to clean it and prep in.
My tank is only big enough right now to handle valve covers and plenum sizes. Anything larger will have to wait until I get a larger tank which may be a year or so as I am planning on building a garage soon.
Pricing for parts is as follows and based off of you sending me a core to dip:
Valve cover - $100.00 + Shipping The cover must be somewhat clean. If you send me a valve cover that looks like the blow one I will charge more due to the additional worked needed to clean it out. A cover like this needs to go through the blasting cabinet to clean out the build-up which means the oil baffles need to be removed and later replaced. I valve cover like this you are looking at $150.00 for me to even touch it.
http://hydro.gonzoinc.com/images/Sludge_Valve_Cover.jpg
If the valve cover looks like this one, then I do not need to blast it. So I won't need to remove the baffles and no additional work needs to be done:
http://hydro.gonzoinc.com/images/Clean_Valve_Cover.JPG
Plenums - $120.00 + Shipping Only the top side of these is dipped since it is almost impossible to 360 degree dip these. I will tape off where the pattern ends and clean it up to have a smooth transition line when the pattern ends and the base coat begins. I can back fill the letting on the plenum for an additional $10.00 in any standard color you want.
Timing Covers - $60.00 for both + shipping Due to how these have to be dipped it is best to not use a tight straight pattern like carbon Fiber. I have to change directions during the dip which will change the direction of the weave. A cross hatch pattern would probably work OK.
Spark Plug Covers - $30.00+ Shipping The black stock covers cannot be done. I have tried multiple times and each time air gets caught due to the concave shape. Best to only have flat aftermarket plug covers done like the ones I did for Ninja Performance.
Plastic trim and engine parts - Let me know what you want done and I'll work up a price. plastic parts are easier to do as no real prep work needs to be done on them.
All parts are painted in a High Temp Ceramic paint good up to 500 degrees. All parts will get a clear coat to protect the graphics in your choice of Gloss or Satin. Gloss Clears get cut and polished at no additional charge.
All raised lettering on covers and plenums get sanded down to the aluminum. if you want a valve cover shaved let me know as I can shave the lettering off for additional cost.
If you have other non-3S parts you want dipped let me know and I'll work out a price.
I will not ship back a part if I see any issues with the way the graphic laid down. I will re-dip the part as needed until the part is how it should be. I will not mail back crap!!
So lets start a list here of who is wanting parts done. Please add yourself to the list and let me know what you want done. The list starts with those who IM'd me earlier about getting parts done:
1. DCIV
2. AdamVR4
3.
4.
5.
6.
7.