View Full Version : HELP! I think I bricked/stuffed my FlashECU :(
TUFFTR
08-31-2013, 01:02 AM
Hi guys. Need some urgent help here.
Took the car for its first test drive today and all was well. Started, drove sweet! Got back, and I wanted to upload a chromed ROM to the ECU that I had disabled all the CEL bits in (to stop the check engine lights on) and well now its just cranking. I have the tactrix 2.0 flasher cable and a BlackStealth conversion harness.
I first tried to read the current image and it came up with an error saying it was unreadable.
OK, Tried to then flash on the modified .bin file to the ECU and it failed halfway through.
Paul not happy.
Paul need help.
What the HELL did I do wrong and how the HELL do I fix this. Car needs to drive in 2 weeks time. I'm so worried now. I hate ECU troubles.
Stupid Paul, stupid stupid Paul.
edit, car is a 3.5L NA running a TT flashECU.
2fnloud
08-31-2013, 01:46 AM
i remember hearing of problems with Blackstealth's conversion cable, But Anteno claims it was only his cali-spec harness that had a wire going to the wrong place. What ECU are you using Jester's or Clone ECU?
TUFFTR
08-31-2013, 04:29 AM
Jesters mate.
Its weird it reads, and test writes OK but fails reading. Ffs. Ill get in contact with them tonight to see what i can do even if i have to send it back to the us
TUFFTR
08-31-2013, 05:44 AM
http://i9.photobucket.com/albums/a52/dodgeviper89/11111111.png (http://s9.photobucket.com/user/dodgeviper89/media/11111111.png.html)
http://i9.photobucket.com/albums/a52/dodgeviper89/2222222.png (http://s9.photobucket.com/user/dodgeviper89/media/2222222.png.html)
Greg E
08-31-2013, 07:28 AM
Definitely bricked. One of the first jesters ECU I've seen this happen to.
Try flashing your old file to it.
TUFFTR
08-31-2013, 07:55 AM
That is not what I wanted to hear. Ffs. I've sent an email to him to see if he can help me asap. Low voltage issue i assume. Wouldnt of thought that'd happen being a brand new. 780cc battery.
Fml.
TUFFTR
08-31-2013, 07:58 AM
Tried flashing the stock chromed bin file to it and the same issue.
:/
Greg E
08-31-2013, 08:03 AM
Sometimes you can get lucky by being persistent and trying over and over flashing different files to it.
TUFFTR
08-31-2013, 08:14 AM
Well, thats some hope mate. Ill give it a shot. Any other tips?
2fnloud
08-31-2013, 08:33 AM
Greg, B-man had this problem at NG, Jester ECU Blackdtealth harness.
TUFFTR
08-31-2013, 08:50 AM
Interesting.
kywhitelightning
08-31-2013, 02:10 PM
I either always plug into a charger when flashing or if a charger is not available, I start the car for a few minutes to charge the battery before flashing. I refuse to flash if the voltage reads 12.1V or less. We load software on vehicles at work all the time and quite a few components have been bricked due to low voltage. It's not worth the risk if you know you're on the edge, voltage wise. Put a charger on it and like Greg said keep trying. Hopefully it comes back from the dead.
Jeff
KeithMac
08-31-2013, 02:42 PM
As above, when I flash motorbike ECUs at work the bikes are ALWAYS on a battery charger!.
Bricking a £1000 Magneti Marrelli ecu is not something I'd want to charge a customer for.
anyonebutme
08-31-2013, 04:13 PM
Also note that too high of voltage will brick an ecu by over burning the tune in. Also note that this is not mentioned anywhere in Greg's writeup. A lot of battery chargers will float at something like 15 volts.....which apparently will brick an ecu every time.
Brett told me if any error happens.....reflash in the last tune over and over again......and if that doesn't work the chip has to be replaced.
Greg E
08-31-2013, 04:55 PM
Also note that too high of voltage will brick an ecu by over burning the tune in. Also note that this is not mentioned anywhere in Greg's writeup. A lot of battery chargers will float at something like 15 volts.....which apparently will brick an ecu every time..
Brett came up with that theory some time ago and I've never been able to repeat it. Tried to brick an ECU several time even flashing it with the volts cranked as high as 20... Nothing happened.
The tactrix cable boost the voltage to 16V for the flash required to erase the chip and setup the gate. It's a DROP in voltage during the flash which offsets the gate and causes the "Fail to Erase" error you see.
If you somehow "over energized" the chip all you would do is burn the image much deeper into it and risk prevent an erase next time the chip is flashed.
I think it was mearly coincidence he bricked that one ECU with that over charge.
TUFFTR
08-31-2013, 07:19 PM
Interesting. Well guys I'll keep trying today. If not Jesters Dedd ssaid he can fix it up for me so if not shes in the post via express tomorrow.
Then when i get it back, I simply never touch it again! However leaves me worried when i need to go and get this professionally tuned later on this year...
anyonebutme
08-31-2013, 07:29 PM
EMULATOR!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
lol.
Greg E
08-31-2013, 09:49 PM
Definitely bricked. One of the first jesters ECU I've seen this happen to.
Try flashing your old file to it.
Ah just learned this isn't a PnP ECU. It's a 98/99 clone with an adaptor harness.
:chin:
TUFFTR
08-31-2013, 10:31 PM
Yup. Tried flashing it 10 more times now same issue.
Could this be an issue in the harness and not the ECU?
TUFFTR
08-31-2013, 11:03 PM
Even in flash recovery mode. Strange how it test writes an ecu file ok, but fails on the real one. Whore
Jimvr4
09-01-2013, 12:54 AM
Never flash without a charger hooked up. Measure the voltage while charging and try to keep it to around 13V. The Tactrix voltage booster is probably dropping out of regulation when battery voltage gets much below 12V. That's what causes bricking - instability of the Tactrix programming voltage
TUFFTR
09-01-2013, 02:44 AM
Tried it again with a charger hooked up and it was about 13v at the battery. Still failing. I think ill just send it back :( not having much luck today.
TUFFTR
09-02-2013, 02:55 AM
Well, it's on it's way back to the good ol' US of A now. I'm still a bit worried though, there's no way to 100% tell if it was my fault due to apparent low voltage when flashing, or if *something* might be amiss with the adapter harness?
A trouble I really didn't need right now but I do appreciate the quick responses and feedback.
llabmik2
09-02-2013, 03:35 PM
Recovery mode only works if you bench the ECU.
Have you tried building a bench harness and benching the ECU? You have to flash it while its benched, then put it back in the car and flash it again using the OBD2 port.
I know you can do this on Evo ecu's as I have done it before not sure about the 3KGT ecu.
TUFFTR
09-02-2013, 08:16 PM
Unfortunately mate I'm just in a dilly of a pickle with this situation I got myself in. Car was booked in 3 months ago for TIG welded custom made exhaust front to back so the car NEEDS to be working in 2 weeks. Plus I'm going interstate this week so I just have no time to fix this stuff up of mine. I could get the car trailered to the joint but after almost 12 months off the road after what was supposed to be a simple loom swap I'm bloody over it!
smartaxel
09-02-2013, 09:53 PM
My suggestion. Get a cheap meter or continuity tester and makes sure the adapter harness you are using is pinned out correctly. This way, you know nothing is going to be broken on the replacement ECU. I believe they had pinouts on one of the flash ecu sites. If not, send me a PM or email and I can send you a copy of the one I have.
TUFFTR
09-02-2013, 10:16 PM
No problems. I certainly want to double check the Flashing pinouts are correct. I have high faith in this Adaptor harness, and the person who made it, but alas, can't hurt to double check.
As long as when this gets professionally tuned I have no issues that's all i'm worried about. I really don't want to touch the ECU again!
n2nsanity
09-04-2013, 11:51 PM
This sucks man. I need to turn off a bunch of the peripheries on mine too. I'm even more scared to now :(
Also, I've yet to find how to use that power booster cable. At least I think that's what it's supposed to be. Looks like a 3.5mm audio cable to me, lol.
Greg E
09-05-2013, 08:38 AM
I think you'll find that you won't be able to flash without that wire hooked up.
jazz9
09-08-2013, 03:14 AM
I think you'll find that you won't be able to flash without that wire hooked up.
Yes, i can confirm that it will not flash while the booster cable isn't plugged in. ( in my case anyhow )
Jeff V.
09-10-2013, 01:50 PM
Never flash without a charger hooked up.
Even the charger can cause problems. I used to work at GM doing dealer technical support for everything related to module reflashing.
A WalMart charger that's designed to jump start a pickup truck in the dead of winter has low grade parts that can cause current fluctuations that interrupt reflash processes. GM actually worked with a vendor to validate a high-end charger/analyzer with conditioned power outputs for use during reflash operations.
On the flip side, at least GM designed their modules to boot into a recovery mode. 9 times out of 10, we could recover the module if the tech called us and went through the steps instead of just dumping it in the warranty pile and billing the customer for a $600 ECU...
Also, you can't 'burn the flash too deep'. That's ridiculous. The microcontroller has circuitry in place to prevent that.
You either need a good charger with conditioned power output, or you need a good, strong battery with clean power and ground feeds to/from the ECU, the diagnostic port, and the chassis.
Greg E
09-10-2013, 02:17 PM
Also, you can't 'burn the flash too deep'. That's ridiculous. The microcontroller has circuitry in place to prevent that.
Don't tell Brett that.... :p
HLxDrummer
09-10-2013, 08:18 PM
So how do you guys tune your cars if you connect a charger every time? Just plug into a light post in a parking lot? lol
mb3000
09-10-2013, 09:04 PM
So what's a good charger cost these days?
Greg E
09-10-2013, 10:15 PM
So how do you guys tune your cars if you connect a charger every time? Just plug into a light post in a parking lot? lol
It's the first flash that is the risky one. The one with the most changes takes the longest to write. Small little tuning changes take a few seconds and don't need a charger.
n2nsanity
09-10-2013, 11:06 PM
So I shouldn't need a charger to turn off those periphery bits? I had one hooked up just in case.
I still can't read or compare the rom, let alone overwrite it. Logging with evoscan works fine. Both use the same adapter, so Ecuflash just hates me I guess.
kywhitelightning
09-11-2013, 12:27 AM
So how do you guys tune your cars if you connect a charger every time? Just plug into a light post in a parking lot? lol
I either always plug into a charger when flashing or if a charger is not available, I start the car for a few minutes to charge the battery before flashing. I refuse to flash if the voltage reads 12.1V or less. We load software on vehicles at work all the time and quite a few components have been bricked due to low voltage. It's not worth the risk if you know you're on the edge, voltage wise. Put a charger on it and like Greg said keep trying. Hopefully it comes back from the dead.
Jeff
Thanks Jeff for the insight on the power conditioning. Time to drag out the o-scope and check my stuff he he.
Jeff
TUFFTR
09-11-2013, 07:49 AM
It was simply my fault. I took the car for its first drive in a year with a 1 month old D34 Yellowtop in it. Was not enough to fully charge the battery up.
Jimvr4
09-11-2013, 10:18 AM
It's the first flash that is the risky one. The one with the most changes takes the longest to write. Small little tuning changes take a few seconds and don't need a charger.
While it's true that only the changed bits have to be written its still a risk to perform ANY flash without a proper charger hooked up. Do you really want to be the guy that said it was OK when someone bricks their ECU while performing "small tuning changes?"
Greg E
09-11-2013, 10:41 AM
While it's true that only the changed bits have to be written its still a risk to perform ANY flash without a proper charger hooked up. Do you really want to be the guy that said it was OK when someone bricks their ECU while performing "small tuning changes?"
:lol:
Lets be real for a minute. How are you gonna keep a charger hooked up while you're on the street tuning a car? Have a chaser car with a set of jumpers? Maybe rig up a back up battery unit? Return home for every single flash?
I've lost count of the number of times I've flashed an ECU. It's well over a thousand by now. In all that time, the only ECUs I've bricked were from long flashes (flashing different ROMs) and from cars with poor batteries. The ECUs from the cars with poor batteries I was able to recover by flashing the previous ROM back onto it so that's moot.
My laptop takes less than 5 seconds to erase and rewrite a single segment of memory. Typically this is what happens when you're tweaking one or two values at a time. Never have I bricked an ECU doing this. If it did happen somehow, it would be one in a thousand. Very very very low risk.
So to answer your question, yes I'll be that guy to say it.
mjannusch
09-11-2013, 08:47 PM
First flash, flashing a new version of code, flashing a lot of changes, or the car is in the garage and the charger is available: Hook up the charger.
Quick tweak of a couple cells after the car has been running and battery is fully charged: I've flashed a bunch of times with no charger hooked up. Unless your alternator is shot and isn't charging your battery, or your battery is shot and isn't holding a full charge - not much risk. Make sure ALL your accessories are off (headlights, parking lights, wipers, climate control, interior lights, doors/hatch are closed - EVERYTHING).
If either the alternator or battery is in question at all: hook up the charger, or better yet - fix the issues first.
TUFFTR
09-11-2013, 09:28 PM
Well, in saying that, my alternator was rebuilt, although, it's working beautifully. The has was only started a few times beforehand, and as I said only run for about 5 minutes on the road before I came back to flash. The battery is a brand new almost 800CCA deep cycle/starter battery. Everything was turned off at the time. Alas I decided to ignore my voltmeter hovering around 12.5V and continue flashing.
But yeah, Battery is great (starts first go after not being started for 2-3 weeks) and alternator is charging OK. I just think it needs a REALLY nice long drive to charge it back up again fully.
TUFFTR
09-12-2013, 09:40 AM
Also, if my Clutch switch isn't hooked up to anything right now (no cruise) if i wire it up to the ECU as per the instructions will it still work? (But the main line from the clutch switch won't be powered, it'll just see an earth)
n2nsanity
09-12-2013, 12:12 PM
Also, if my Clutch switch isn't hooked up to anything right now (no cruise) if i wire it up to the ECU as per the instructions will it still work? (But the main line from the clutch switch won't be powered, it'll just see an earth)
Same boat here, sort of. Mtx engine harness but still have the atx dash harness.
TUFFTR
09-15-2013, 10:05 AM
ECU back in (although in a plastic case this time so no way of mounting the bastard) But she STARTS and RUNS and NO CEL's! SO pretty damn happy :D
Greg E
09-15-2013, 11:12 AM
Also, if my Clutch switch isn't hooked up to anything right now (no cruise) if i wire it up to the ECU as per the instructions will it still work? (But the main line from the clutch switch won't be powered, it'll just see an earth)
While it won't effect the various park/drive tables you just have to make sure NLTS is disabled in periphery 1 so this won't cause issues with your rev limiter.
TUFFTR
09-15-2013, 09:33 PM
.......................................fuck.
TUFFTR
09-17-2013, 05:26 AM
if it does, does the clutch switch need to be seeing 5V from the line that's being tapped? like how does this work with the clutch switch? Does the ECU just need to see an earth? (cut wire on adaptor harness going to ECU pin 67 > continue to clutch switch, splice into 5V+ wire going to clutch switch) Cause if this is going to screw with me I'll see if I can start rigging up the C/C so it at least pumps out the right 5V signal to the clutch switch.
Greg E
09-17-2013, 07:22 AM
When that pin is grounded the bit is flipped to 1. You need to wire it to the starter switch not the cruise switch so that bit sees earth only when the clutch is pressed to the floor.
TUFFTR
09-17-2013, 08:12 AM
I see. I don't have a starter switch :( It's a 1993 Magna running a 1991 Diamante loom top to tail. Alas that's all I need to know! If it needs to see an earth I can do that...
TUFFTR
10-01-2013, 09:30 AM
Well small update. Car is almost back from the fabricator getting its 100% top to tail custom exhaust done. Preliminary reports show the wideband o2 sitting at idle at 17:1 AFR :| Which ISNT good.
Now, I Believe my bricking issues were due to me not having a battery properly charged. It'll be a 40 minute drive home and I do believe that will be plenty of time/charge to have at least 10 minutes of solid flashing time. I'm thinking because the ECU is set for 360cc injectors, and it's only got 240cc's it's throwing everything off.
thoughts? Should I right to flash this again?
mjannusch
10-01-2013, 11:56 AM
I'm thinking because the ECU is set for 360cc injectors, and it's only got 240cc's it's throwing everything off.
Really, injecting 1/3 less fuel than it should would make it run lean? :D
thoughts? Should I right to flash this again?
Yes, put in the correct injector scaling size and flash it, preferably with a battery charger hooked up to the battery.
Chris@Rvengeperformance
10-01-2013, 12:17 PM
you probably don't have it setup for the o2 configuration you are running too.
Greg E
10-01-2013, 01:03 PM
Hmm... Wonder if I have a diamanté ROM in my collection. I can probably give you the correct inj latency numbers too.
Edit: you have the same injectors as a 3000GT SL so you can copy them out of that ROM.
TUFFTR
10-02-2013, 06:05 AM
Really, injecting 1/3 less fuel than it should would make it run lean? :D
Yes, put in the correct injector scaling size and flash it, preferably with a battery charger hooked up to the battery.
Stupid thing on my part where I sent an ECU file to Adam to Flash onto the ECU. Mind was a mess.
and Forest Gump you are 100%, just found that too, and now switched off...
Greg E. The 3.5L runs 240cc injectors, so if they were to be 100% dead on they'd need to come from a 1995-2000 Debonair, but the 3L numbers for now will suffice!
Wish me luck..
TUFFTR
10-02-2013, 06:05 AM
Really, injecting 1/3 less fuel than it should would make it run lean? :D
Yes, put in the correct injector scaling size and flash it, preferably with a battery charger hooked up to the battery.
Stupid thing on my part where I sent an ECU file to Adam to Flash onto the ECU. Mind was a mess.
and Forest Gump you are 100%, just found that too, and now switched off...
Greg E. The 3.5L runs 240cc injectors, so if they were to be 100% dead on they'd need to come from a 1995-2000 Debonair, but the 3L numbers for now will suffice!
Wish me luck..
n2nsanity
10-02-2013, 03:22 PM
Good luck. I expect some decent results from all this :)
TUFFTR
10-03-2013, 11:57 PM
Good luck. I expect some decent results from all this :)
Ha, your telling me. As nervous as shit really about tomorrow. I know it should go straightforward now BUT after having this happen I really can't afford another screw up.
Ah well, here hopes! All the NA fuel injector tables were sent across so yeah........
TUFFTR
10-04-2013, 11:21 PM
Well I type this pulled over on the side of the road waiting to get towed. Tried to READ from the ECU using two different laptops and the 2.0 tactrix. No luck. Tried to drive it home with the o2 unplugged only for 10 minutes in the wideband to read so lean it read '-.--' even under throttle. No thanks!
So looks like the ecu will be sent back to get another file flashed onto it. Kicking myself I forgot about this when i had it swapped the first time.
Anyway, who can help me out here and flash a ROM onto this for me hopefully <$100. By the time the damn ecu is sent to the us and shipped back its close to $180 so yeah the cheaper the flash it really helps me.
Bugger.
Chris@Rvengeperformance
10-05-2013, 12:08 AM
Well what does it say when you try to read? Fyi the flash enable wire must be plugged in even to read.
TUFFTR
10-05-2013, 12:47 AM
Ill get a picture of the obd port to confirm wires are where they need to be.
Error on my laptop didnt give me a code, said opening port, init sequence 2, sequence ended (or along those lines on the phone right now)
Certainly thinking there is a pin out of whack in this harness.
Ah well, small steps!
Chris@Rvengeperformance
10-05-2013, 02:14 AM
Yeah that behavior is caused by the flash wire not hooked to the tactrix
TUFFTR
10-05-2013, 03:26 AM
Yeah that behavior is caused by the flash wire not hooked to the tactrix
Mmm, it's making and more sense now. Plugged in a 2.5L DOHC ECU and she fired up and had beautiful idle AFR's. under load she didnt wanna work. Sputtering all over the joint. Probably cooked the plugs, so I'll swap those out next week, in the meantime she can sit again!
Shit picture of the rear
http://i9.photobucket.com/albums/a52/dodgeviper89/IMG_4282.jpg (http://s9.photobucket.com/user/dodgeviper89/media/IMG_4282.jpg.html)
And a decent picture of the front
http://i9.photobucket.com/albums/a52/dodgeviper89/IMG_4281.jpg (http://s9.photobucket.com/user/dodgeviper89/media/IMG_4281.jpg.html)
So yeah, 91 Harness (1G) into the 99 ECU
TUFFTR
10-05-2013, 03:26 AM
Yeah that behavior is caused by the flash wire not hooked to the tactrix
Mmm, it's making and more sense now. Plugged in a 2.5L DOHC ECU and she fired up and had beautiful idle AFR's. under load she didnt wanna work. Sputtering all over the joint. Probably cooked the plugs, so I'll swap those out next week, in the meantime she can sit again!
Shit picture of the rear
http://i9.photobucket.com/albums/a52/dodgeviper89/IMG_4282.jpg (http://s9.photobucket.com/user/dodgeviper89/media/IMG_4282.jpg.html)
And a decent picture of the front
http://i9.photobucket.com/albums/a52/dodgeviper89/IMG_4281.jpg (http://s9.photobucket.com/user/dodgeviper89/media/IMG_4281.jpg.html)
So yeah, 91 Harness (1G) into the 99 ECU
TUFFTR
10-05-2013, 03:30 AM
Also, you really don't understand how much I do appreciate everyone's input here. In a time where the car's been off the road for a year, then for me to brick an ECU and have to get the car towed home after the new exhaust.......well yeah, means alot to be getting help to find a resolution!
TUFFTR
10-05-2013, 10:54 AM
Spent the last.....2 hours....probably looking in the wrong bit of the internet, can anyone confirm what wires go where from this ODB2 port into the flasher harness?
TUFFTR
10-05-2013, 10:28 PM
Also just been told current ecuflash doesnt work too which *might* explain some things....anyone know a version which DOES work?
n2nsanity
10-05-2013, 10:47 PM
Also just been told current ecuflash doesnt work too which *might* explain some things....anyone know a version which DOES work?
I can send you the version i'm using.
Greg E
10-06-2013, 09:06 AM
I just flashed my ECU a few times the other day with the current version of ECUFlash.
llabmik2
10-06-2013, 01:03 PM
Also just been told current ecuflash doesnt work too which *might* explain some things....anyone know a version which DOES work?
I'm on the newest beta version and I can flash just fine.
TUFFTR
10-06-2013, 05:00 PM
God damn conflicting information.
Chris@Rvengeperformance
10-06-2013, 06:17 PM
Do you have a wire connected to the tractrix mini phono plug? (small headphone jack)
TUFFTR
10-06-2013, 08:16 PM
Do you have a wire connected to the tractrix mini phono plug? (small headphone jack)
Correct sir.
headphone plug into the tactrix.
USb into the laptop, ALTHOUGh I forgot I had evoscan. I'm going to shoot over tonight to where the car is and try and read through evoscan instead. I'm only aiming to at least pull an image first. Once I can pull an image I'll be 100x more confident flashing a ROM on.
Laptop is win7 32bit, UAC off (and always has been)
I've since uninstalled ECUFlash and installed an earlier version but yeah, since Greg still reckons the newest one is OK there is something along the chain here not adding up..
n2nsanity
10-06-2013, 09:30 PM
what were the symptoms before? when you thought you bricked it
TUFFTR
10-07-2013, 07:55 AM
Oh, i bricked it! I couldnt read from the ecu but she obviously did some sort of a write as the car would just crank and crank. Didnt get time to test evoscan tonight so ill need to get onto that tomorrow.
Cant possibly be wiring...blacksteath has done a hundred conversion looms...mine cant be that mangled. Its gotta be software or laptop related surely
Jimvr4
10-07-2013, 05:04 PM
Wait, you're not saying you bricked it a second time are you?
That headphone jack - are you getting Battery voltage on that (not sure whether tip or ring)? My understanding is the Tactrix box takes that Battery voltage and uses a charge pump circuit to raise it up to like 16V internally. If you have low voltage input or a bad Tactrix 2.0 then you could brick the ECU.
TUFFTR
10-07-2013, 06:15 PM
Wait, you're not saying you bricked it a second time are you?
That headphone jack - are you getting Battery voltage on that (not sure whether tip or ring)? My understanding is the Tactrix box takes that Battery voltage and uses a charge pump circuit to raise it up to like 16V internally. If you have low voltage input or a bad Tactrix 2.0 then you could brick the ECU.
I did not brick it a 2nd time. Just describing what happened the 2nd time
Cool, I'll test the headphone jack mate
If its of any help, during the process, the Taxtrix seems to just be cycling through the colours on its inbuilt LED. I was told these need to be solid which indicate proper connection
TUFFTR
10-08-2013, 04:22 AM
Voltage at tip of headphone jack 4.11v. Battery needs a charge though. Sitting at 12.3v.
Ill upload pictures tonight.
TUFFTR
10-08-2013, 06:08 AM
http://i9.photobucket.com/albums/a52/dodgeviper89/null_zps9203e0b3.jpg (http://s9.photobucket.com/user/dodgeviper89/media/null_zps9203e0b3.jpg.html)
http://i9.photobucket.com/albums/a52/dodgeviper89/null_zps3c80735b.jpg (http://s9.photobucket.com/user/dodgeviper89/media/null_zps3c80735b.jpg.html)
http://i9.photobucket.com/albums/a52/dodgeviper89/null_zpsc1bcdfbe.jpg (http://s9.photobucket.com/user/dodgeviper89/media/null_zpsc1bcdfbe.jpg.html)
http://i9.photobucket.com/albums/a52/dodgeviper89/null_zpsc331ca3f.jpg (http://s9.photobucket.com/user/dodgeviper89/media/null_zpsc331ca3f.jpg.html)
http://i9.photobucket.com/albums/a52/dodgeviper89/null_zps6617f456.jpg (http://s9.photobucket.com/user/dodgeviper89/media/null_zps6617f456.jpg.html)
Wires from the OBD2 port on the RHS of my chubby ass finger
http://i9.photobucket.com/albums/a52/dodgeviper89/null_zps0824b3d6.jpg (http://s9.photobucket.com/user/dodgeviper89/media/null_zps0824b3d6.jpg.html)
http://i9.photobucket.com/albums/a52/dodgeviper89/null_zpsbb7d28bb.jpg (http://s9.photobucket.com/user/dodgeviper89/media/null_zpsbb7d28bb.jpg.html)
http://i9.photobucket.com/albums/a52/dodgeviper89/null_zps3ae73e32.jpg (http://s9.photobucket.com/user/dodgeviper89/media/null_zps3ae73e32.jpg.html)
Jimvr4
10-08-2013, 10:33 AM
Sorry, I got the function of the 2.5mm jack all wrong. Here is the Tactrix page
What are the pinout and pin functions of the Openport 2.0? (http://www.tactrix.com/index.php?option=com_content&view=article&id=76:what-are-pinout-and-pin-functions-of-the-openport-20&catid=39:openport-20&Itemid=41)
n2nsanity
10-08-2013, 01:09 PM
Sorry that just looks overcomplicated, lol.
The big deal with Jester's ecu was not needing a harness adapter ;)
And it looks like ecuflash is not seeing the metadata for your rom. 23860006.xml needs to be in the ecuflash metadata directory.
If you reinstalled ecuflash, make sure you delete all the old files, then copy back the ones you need.
Greg E
10-08-2013, 02:46 PM
Sorry that just looks overcomplicated, lol.
The big deal with Jester's ecu was not needing a harness adapter ;)
Some people cheap out and don't get the legit ECUs Brett and Adam sell, however, I think Tuff bought one of Adams clones before he offered the PnP chip.
TUFFTR
10-08-2013, 06:26 PM
Some people cheap out and don't get the legit ECUs Brett and Adam sell, however, I think Tuff bought one of Adams clones before he offered the PnP chip.
100% Correct, was not done as a cost saving measure. Literally a week or so after I got mine delivered PnP ones were available. super pissed! but hey in the long run, as long as it works.
I'm sure as hell I copied all the files into the right directory. Will update you guys later.
And yeah, when i go to read from the ECU all I see is EVO stuff really.
Greg E
10-08-2013, 08:45 PM
Yeah I'm talking to Colby about the nomenclature he uses for reading ECU.
When you read a rom off one of our ECUs, select the h8 option which I believe is the second one from the top. I can't remember what the full label is for it but the h8 ECU is the same memory model for every single ECU mitsu made from 98-2000 not just the evo.
TUFFTR
10-08-2013, 09:08 PM
Yeah I'm talking to Colby about the nomenclature he uses for reading ECU.
When you read a rom off one of our ECUs, select the h8 option which I believe is the second one from the top. I can't remember what the full label is for it but the h8 ECU is the same memory model for every single ECU mitsu made from 98-2000 not just the evo.
I see. I did try that one (as I basically tried all of them!) however when I get home I'll check where I've placed these files from my Chromed 2.0 ROM I have.
"Extract the 23862006.XML fileto:
C:\***File Folder you installed EcuFlash***\EcuFlash\rommetadata\mitsubishi"
This might be my issue. Will update ya's later.
TUFFTR
10-09-2013, 05:02 AM
Really weird.
EvoScan will log no worries. So I don't think there is a wiring fault here. Moreso a problem between myself and what I'm doing on the laptop.
So I'm going to ask the OBVIOUS question
In ECUFlash, where should the Metadata directory and ROM directory be pointing to? I gather the ROM directory is ECUflash/rommetdata.
Does it matter if I "extract" the file or just pop it on the desktop and then copy and paste them into the appropriate directory's?
And yeah, trying the H8 one still doesnt work. "ERR_TIMEOUT"
Going to stick the battery on charge tomorrow to get some juice into her though.
n2nsanity
10-09-2013, 05:58 AM
you can check or even change the location under settings. from the screenshots you posted earlier, it was right there in the logs lol. "c:\ecuflash\rommetadata\"
TUFFTR
10-09-2013, 06:10 AM
I tried everything in the hope something would change...Changed directorys, moved files, this, that, nothing! (from the settings cog) Eh - I'm really getting over this. Supposed to be easier then my fully aftermarket ECU! (I know there's light at the end of the tunnel...)
Greg E
10-09-2013, 07:45 AM
Really weird.
EvoScan will log no worries. So I don't think there is a wiring fault here. Moreso a problem between myself and what I'm doing on the laptop.
So I'm going to ask the OBVIOUS question
In ECUFlash, where should the Metadata directory and ROM directory be pointing to? I gather the ROM directory is ECUflash/rommetdata.
Does it matter if I "extract" the file or just pop it on the desktop and then copy and paste them into the appropriate directory's?
And yeah, trying the H8 one still doesnt work. "ERR_TIMEOUT"
Going to stick the battery on charge tomorrow to get some juice into her though.
Then your flash wire isn't going to the correct pin or has poor connectivity.
Yes evoscan will still work without the flash wire.
TUFFTR
10-09-2013, 07:55 AM
Interesting. Flash wire is the red one on the headphone jack yes? That's the one where I'm only seeing 4V at the tip yeah?
Cool, progress is being made.
(Sorry for sounding like a fucking noob at this, old aftermarket ECU was just a serial > USB)
TUFFTR
10-09-2013, 07:59 AM
99% sure I took this picture because is was where the flash wire was going
http://i9.photobucket.com/albums/a52/dodgeviper89/null_zps0824b3d6.jpg
Now, to find out where this wire SHOULD be going and proceed from there!
TUFFTR
10-09-2013, 08:15 AM
Confirmed (I knew I wrote this down for a good reason) Pin 100 is going to the flasher cable.
Greg E
10-09-2013, 08:24 AM
Tuff, see the teal wire in this picture? That's the flash wire for Brett's harness. In your harness it's the red one. Note where the teal wire goes vs your red wire.
Plug n? Play Harness | THE ORIGINAL VR4 Clone? ECU (http://www.cloneecu.com/product/plug-n-play-harness)
TUFFTR
10-09-2013, 08:32 AM
Yep, looks like it goes to opposite ends of the plug.
God you're good.
I'll throw blackstealth a PM, see if he can lend a hand!
Greg E
10-09-2013, 09:16 AM
If your harness has been wrong all along this means you didn't brick your first ECU.
striker2
10-09-2013, 10:19 AM
I just checked my first gen harness and the wire coming from the headphone plug goes to the same pin, pin 100.
LeRoyDL
10-09-2013, 04:47 PM
Red look like its in the right place to me. That "is" 100 on the 3rd plug right?
http://i.imgur.com/OBuly.jpg
LeRoyDL
10-09-2013, 04:52 PM
really confused by that photo of Brett's harness. ;/
FWIW, i just assembled a harness with parts i got from blacksteath this past weekend... so very much in for clarification.
TUFFTR
10-09-2013, 05:52 PM
Well i certainly did something. Car just cranked after i attempted to flash it. So bricked or not it didnt fire!
Whore....yeah its pin 100 its on but the tips only seeing 4.17v
n2nsanity
10-09-2013, 06:00 PM
If your harness has been wrong all along this means you didn't brick your first ECU.
This is what I had been saying, lol.
Could have possibly still bricked the ecu by sending power down the wrong pin and frying something?
LeRoyDL
10-09-2013, 08:55 PM
I thought it was odd that 72 76 and 77 weren't populated on your harness but they are prob optional?
TUFFTR
10-09-2013, 09:15 PM
It's going to an NA engine if that makes any difference? Not sure what those are.
Also, confirmed with Blackstealth, Pin 100 is correct for the flasher cable.
Sigh. I'll report back tonight with any other useless information I can conjure up.
Greg E
10-09-2013, 09:15 PM
This is what I had been saying, lol.
Could have possibly still bricked the ecu by sending power down the wrong pin and frying something?
Well bricked and frying are two different things. It's not possible to brick the ECU by attempting to flash using the wrong pin because the chip will never go into flash mode.
99 vr4
10-10-2013, 02:00 AM
To confirm, pin 100 IS the flash voltage input.
The center pin of the 2.5mm plug is a 5-25 vdc programmable voltage, which if memory serves me, should be about 16 vdc when you are reading or flashing a rom. All other times it is a different voltage. I will test tomorrow and let you know what I have....
Pin 71 and 72 are the primary (bank 1 and bank 2) O2 sensors... On some NA (and some euro turbo) they only have one primary O2... Hence why you only have pin 71 populated....
Brett
TUFFTR
10-10-2013, 02:02 AM
To Brett above or Greg or anyone for that matter, are there ANY pictures at all I could get or any information for you guys to possibly help me diagnose why this is happening..
99 vr4
10-10-2013, 01:28 PM
I can only provide very limited support since this is not my harness or ECU...
The voltage you are seeing is being generated by the ECU... The ECU keeps the Flash line at approx 4 volts (most of the time - but not all of the time) .. My test ECU shows between 3.4861 and 3.9435 vdc depending on when I checked the voltage.
The Open Port 2.0 should show NO voltage or very little voltage not plugged into the car harness... Not plugged in to the vehicle harness but still connected to the computer via the USB port, my OP 2 shows 0.0003 vDC on the tip of the 2.5mm plug...
While connected to the vehicle and reading or flashing a ROM, my OP 2 shows between 16.942 and 16.944 vDC on the flash pin (pin 100 of the 98/99 ECU).
When reading you should be choosing "Mitsubishi ALL 2nd Gen/EVO5-6 MH7202F 1996-2001 mitsukernel H8539F" which should be the 2nd choice in the list.
Hope this helps...
UPDATE
Here are the OBDII to 99 ECU Pin Mappings to help you....
Viewed from the FRONT or PIN SIDE of the OBDII plug going to the vehicle harness, pin 1 is the top left, and pin 16 is the bottom right.
Pin 1 of the OBDII plug should go to pin 84 of the 98/99 ECU. This is the OBDII "ENABLE" pin and tells the ECU that you are ready to communicate on the data line.
Pin 4 and 5 of the OBDII plug should be GROUND.
Pin 7 of the OBDII plug should go to pin 85 of the 98/99 ECU. This is the OBDII "DATA" pin otherwise known as the ISO-9141 K-line.
Pin 16 of the OBDII plug should go to pin 60 of the 98/99 ECU or any other CONSTANT 12 volt source. This 12 volt source should NOT run through the ignition switch. Pin 60 of the ECU is the battery backup to the ECU and is ALWAYS on.
UPDATE 2
You are missing a LOT of wires from your harness . . . making me think that it is not 100% complete.
Just from the picture of the 30 pin plug, here is the break down.
First Row – viewed from the wire side of the plug, left to right.
Pin 71 of the 98/99 ECU is the Rear Bank Primary O2 Sensor (Used on ALL vehicles)
Pin 72 of the 98/99 ECU is the Front Bank Primary O2 Sensor (Only used on vehicles that have dual O2 sensors. Most NA do not use this and Most EURO and JDM Turbos do not use this.)
Pin 73 of the 98/99 ECU is the Rear Bank Secondary O2 Sensor (Not Used on all vehicles)
Pin 74 of the 98/99 ECU is the Front Bank Secondary O2 Sensor (Not Used on all vehicles)
Pin 75 of the 98/99 ECU is the Active Exhaust Switch input (Only needed on vehicles that need this function or switched input)
Pin 76 of the 98/99 ECU is NOT USED
Pin 77 of the 98/99 ECU is the Boost Gauge Output (Only needed on vehicles that actually have a boost gauge that is driven by the ECU)
Second Row
Pin 78 of the 98/99 ECU is the Throttle Position Sensor Input (Absolutely Required)
Pin 79 of the 98/99 ECU is the Idle Switch Input (Absolutely Required)
Pin 80 of the 98/99 ECU is the Vehicle Speed Sensor Input (Absolutely Required)
Pin 81 of the 98/99 ECU is NOT USED
Pin 82 of the 98/99 ECU is NOT USED
Pin 83 of the 98/99 ECU is the AC ECT Sensor Input, otherwise known as “SWITCH 1” (Absolutely Required)
Pin 84 of the 98/99 ECU is the OBDII Enable Pin (Absolutely Required)
Pin 85 of the 98/99 ECU is the OBDII Data Pin (Absolutely Required)
Pin 86 of the 98/99 ECU is for Auto Trans (AT Only - required to communicate to the Auto Trans Computer)
Pin 86 of the 98/99 ECU is for Auto Trans (AT Only - required to communicate to the Auto Trans Computer)
Pin 87 of the 98/99 ECU is for Auto Trans (AT Only - required to communicate to the Auto Trans Computer)
Pin 89 of the 98/99 ECU is NOT USED
Pin 90 of the 98/99 ECU is NOT USED
Third Row
Pin 91 of the 98/99 ECU is the Knock Sensor Input (Absolutely Required)
Pin 92 of the 98/99 ECU is the MAP Sensor Input (Only required if you have a MAP sensor, are going to add a MAP sensor, or are using this input for something else)
Pin 93 of the 98/99 ECU is the Fuel Tank Differential Pressure Sensor Input (Only required if you have a Fuel Tank Pressure Differential Sensor or are going to use this for something else like wideband logging)
Pin 94 of the 98/99 ECU is NOT USED
Pin 95 of the 98/99 ECU is NOT USED
Pin 96 of the 98/99 ECU is NOT USED
Pin 97 of the 98/99 ECU is NOT USED
Pin 98 of the 98/99 ECU is NOT USED
Pin 99 of the 98/99 ECU is the IG (Ignition Switch) Input Voltage (Absolutely Required)
Pin 100 of the 98/99 ECU is the Flash Enable Pin (Absolutely Required)
TUFFTR
10-10-2013, 06:11 PM
Shit. That's awesome dude. Printing this out and checking over my shit tomorrow.
The car's harness is from a 1991 Diamate running an N/A DOHC Automatic loom (Converted to manual, so not running a TCU) I tracked down the JDM wiring diagrams for this exact car and had them sent to balckstealth, he custom made the loom, although he did mention I think only 1 or 2 pins differed on the 91 harness side compared to a JDM NA GTO which he's also done (Was along those lines, could of been the USDM..)
I'll double check all these pinouts tomorrow. I do know there is only 1 ground wire on the OBD2 Harness, not 2, so I will look at adding the 2nd earth.
Do you have the pinouts for the other 2 plugs aswell?
Thanks a Million dude.
TUFFTR
10-10-2013, 06:26 PM
Only weird thing with that is pin 92 for MAP sensor input.....gotta trace where that's going in my stock harness, certainly dont have one of those!
TUFFTR
10-12-2013, 03:22 AM
SO. It can't be the wiring. Datalogging works. Confirmed all the pins and shit are correct.
Un-installed ECUFlash, re-installed.
Hang.....the fuck on.
Yep. Slapped myself in the forehead instantly.
I tried pushing it all the way in but I felt like I was going to break the connection.....just wasn't pushing hard enough.....THIS FOLKS....is NOT connected
http://i9.photobucket.com/albums/a52/dodgeviper89/null_zps5cc6cbbd.jpg (http://s9.photobucket.com/user/dodgeviper89/media/null_zps5cc6cbbd.jpg.html)
This. Is.
http://i9.photobucket.com/albums/a52/dodgeviper89/null_zps345c5d82.jpg (http://s9.photobucket.com/user/dodgeviper89/media/null_zps345c5d82.jpg.html)
Read from the ECU right away. FML.
Greg E
10-12-2013, 11:17 AM
:lmao::lmao::lmao::lmao::lmao::lmao:
LeRoyDL
10-12-2013, 11:20 AM
o f, so 1st ecu was fine? i would be surprised if Adam didn't check it upon receiving.
TUFFTR
10-12-2013, 07:18 PM
o f, so 1st ecu was fine? i would be surprised if Adam didn't check it upon receiving.
Whatever Adam did with the ECU is my guess. Makes perfect sense now. It flashed a bee's dick of information somehow through the pins making contact. So yeah, it was probably bricked, but I'm sure Adam would of had no issues writing another file onto it.
God I feel like the biggest ass wad on earth. I even work in I.T. FFS! "Yes, are you sure it's plugged in?"
Goddam it...
mb3000
10-12-2013, 07:39 PM
It's alright man, everyone makes mistakes. At least you can more forward now!
TUFFTR
10-12-2013, 07:47 PM
It's alright man, everyone makes mistakes. At least you can more forward now!
Yep......Moving forward I shall! New 3 pring spark plugs today....upload the new ECU file with correct injector sizing and off we go...
Appreciate everyone's input too. Sorry for the mess around ><
TUFFTR
10-12-2013, 08:51 PM
Of course my luck has it....try and read from the ecu today ba-BOW. Fucked if i know what is happening or why. Cables plugged in properly which is a bonus. Ahhhh computers y u no work properly
TUFFTR
10-12-2013, 09:34 PM
Thank you dodgey tactrix port or headphone jack. Twisted the connection around BOOM SHE FLASHED!!
Greg E
10-12-2013, 09:36 PM
Thank you dodgey tactrix port or headphone jack. Twisted the connection around BOOM SHE FLASHED!!
I wish you lived closer to me. ;)
TUFFTR
10-13-2013, 05:38 AM
Well, that would be handy! But hey, I got there in the end! She's pegged at 10AFR's under WOT in the higher RPM's. Going to mod the fuel map to leane it off a bit at WOT. I had it at 12.5-13 WOT with the old ECU but I'll try and aim for a dead flat 12 AFR under WOT and let the dyno tune smooth the rest out.
Now, I assume I'm up just upping the values in the high octane fuel tables?
Greg E
10-13-2013, 08:45 AM
Set the table to the AFR you want to see on the wideband and adjust the MAF comp table to fine tune it to actually match your target AFR. Raising the values in the MAF comp table adds more fuel.
TUFFTR
10-15-2013, 11:35 PM
Hmmmm. I simply took some fuel out of WOT but there's still a .5 AFR mismatch somewhere, I'm highly thinking corrections.
Anyway, I need to send the Tactrix back as it was on loan so for now I'll leave it be.
Only thing I'll ask is, does ANYONE have the stock injector characteristics for the 6G74 DOHC injector? From a Montero?
TUFFTR
10-19-2013, 03:51 AM
I know it's probably somewhere here, but what is the default at idle % reading for a TPS? 12%? Took it for another drive today and wow. she goes. AFR's in the 10's and my god - it PULLS. Sucks I will need to wait so long for a tune.
CXRacing TB just sucks in the way that when you set the 'base idle' with the screw it just pushes the TB plate open or closed more, stuffing TPS settings. And It didn't want to restart once warm so hopefully I can nut this out.
Chris@Rvengeperformance
10-19-2013, 01:05 PM
The idle flag being set when your foot is off the gas is what really matters, but 9 to 16% is pretty normal.
Sent from my RM-845_nam_vzw_100 using Tapatalk
Greg E
10-19-2013, 03:57 PM
The idle flag being set when your foot is off the gas is what really matters, but 9 to 16% is pretty normal.
Sent from my RM-845_nam_vzw_100 using Tapatalk
If he's not using the stock TPS there won't be an idle switch.
TUFFTR
10-19-2013, 09:08 PM
Nope, using stock tps! Cool, thanks fellas!
TUFFTR
10-27-2013, 11:23 PM
After fighting with the CXracing TB I went down to the wreckers and got a stocker. Bolted it up and still had issues. Something was not right. After swapping out 4 ISC's i finally found one that acted like normal, flared idle on initial start-up and gradually coming down. Hopefully she's all OK tonight - Also, no matter what TPS or Tb I used, not once did I hit the idle flag in EVOscan. So something is fishy there....
Chris@Rvengeperformance
10-28-2013, 01:11 AM
the default xml for the evoscan idle flag is using the wrong function. iirc you need to change it to read x bit 1. there are other posts on here by me that should confirm that.
TUFFTR
10-28-2013, 01:17 AM
the default xml for the evoscan idle flag is using the wrong function. iirc you need to change it to read x bit 1. there are other posts on here by me that should confirm that.
Interesting. Cool mate, I'll see if I can dig that info up tonight from you. FYI I was using the EFI 3000GT drop down menu item too. - Thanks for that :)
n2nsanity
10-29-2013, 05:58 AM
Oh the fun I still have to look forward to :p
Looks like you're well past the whole bricked ecu deal. Time for a new thread?
TUFFTR
10-29-2013, 06:09 PM
Oh the fun I still have to look forward to :p
Looks like you're well past the whole bricked ecu deal. Time for a new thread?
Yes and No, I am past the whole ordeal and I've FINALLY set the idle. She now finally starts up and idles cold, and hot! I am so friggin wrapped!!!!
TUFFTR
11-21-2013, 06:14 AM
I think I'm going to give up very shortly!
1) Flasher cable end is dodgy, I am going to replace it tomorrow. I have to hold it at a certain height for it to work, else it wont!
2) For some weird ass reason, me trying to set the idle at 1000RPM flat didnt work, infact it was hunting all over the shop! I thought screw this, I'm flashing on the NA ROM. In the back of my head I'm thinking I've missed stuff to edit on the TT ROM for it to work properly. What do you know, started to flash OK, then crapped out halfway.
[19:55:12.583] kernel flash enable
[19:55:12.614] kernel blank flash page: addr: 0002C000
[19:55:27.621] WARNING: failed to erase page at 0002C000!
Sucks because I flashed a modified ROM 10 minutes earlier and it was fine, it seems to of crapped out doing a full flash.
So over it. But I'll fix the dodgy flasher cable end first tomorrow before re-flashing again. Argh.
Greg E
11-21-2013, 08:37 AM
That's not good.
TUFFTR
11-21-2013, 03:54 PM
Ahhhhh just what I need to hear. Goddam it.
Greg E
11-21-2013, 06:45 PM
Start off by trying to flash the old file back onto it.
TUFFTR
11-21-2013, 07:34 PM
Yep. When I tried re-flashing it started the flash process OK then conked out. So there is hope. I borrowed this unit off a performance workshop a few states away and he swear's he's never had an issue with it. I'm going to put on a new headphone jack today onto the flasher wire as that's certainly got issues which may be causing this.
Strange because I set the idle at 1000RPM across the table and put it into SAS mode, and it idled worse! was hunting everywhere. So i figured screw this, I'm starting fresh. Argh, me and my ideas
TUFFTR
11-23-2013, 05:17 AM
This is really annoying me.
Soldered on new headphone jack onto flasher wire. Done.
No more needing to hold it up now. Works everytime.
That is, reads ECU fine (reads whole ECU file?)
Test writes ECU fine.
Fails on Flashing ECU.
Yup. over it.
(had battery on charger even though it read and test read fine, tested flashing 10x times, same error as above)
TUFFTR
11-23-2013, 05:17 AM
This is really annoying me.
Soldered on new headphone jack onto flasher wire. Done.
No more needing to hold it up now. Works everytime.
That is, reads ECU fine (reads whole ECU file?)
Test writes ECU fine.
Fails on Flashing ECU.
Yup. over it.
(had battery on charger even though it read and test read fine, tested flashing 10x times, same error as above)
surfersamu
11-23-2013, 08:10 PM
Since your flash pin was already all loose and faulty... it probably moved while it was flashing.. your ECU is bricked.. or your tactrix cable is faulty... send your log to tactrix they will be able to tell... wrx guys go through this...lol.
First I would try benching the ECU:
Let me google that for you (http://lmgtfy.com/?q=bench+ecu)
try that... im not sure if it works for 3kgt.. now is dead so i wouldn't hurt to try...
Your flash pin has to be solder perfectly... maybe the soldering is cracked behind the 2.5mm stereo jack.. One time I repair my safc by just resoldering a little diode...
What are the pinout and pin functions of the Openport 2.0? (http://www.tactrix.com/index.php?option=com_content&view=article&id=76:what-are-pinout-and-pin-functions-of-the-openport-20&catid=39:openport-20&Itemid=41)
voltate has to be on the tip...
TUFFTR
11-23-2013, 08:32 PM
Since your flash pin was already all loose and faulty... it probably moved while it was flashing.. your ECU is bricked.. or your tactrix cable is faulty... send your log to tactrix they will be able to tell... wrx guys go through this...lol.
First I would try benching the ECU:
Let me google that for you (http://lmgtfy.com/?q=bench+ecu)
try that... im not sure if it works for 3kgt.. now is dead so i wouldn't hurt to try...
Your flash pin has to be solder perfectly... maybe the soldering is cracked behind the 2.5mm stereo jack.. One time I repair my safc by just resoldering a little diode...
What are the pinout and pin functions of the Openport 2.0? (http://www.tactrix.com/index.php?option=com_content&view=article&id=76:what-are-pinout-and-pin-functions-of-the-openport-20&catid=39:openport-20&Itemid=41)
voltate has to be on the tip...
I appreciate the sarcastic undertones of the Let me google that for you link, but yes, I know how to google, I've been at it all day!
And I think you may be right. I have since soldered on a new headphone jack and the connection is rock solid now. Can test write and read no worries, WRITING is still failing.
Amazing how in the end a $1 headphone jack could cost me up to $400 in postage and swapping fee's. Just my fucking luck I swear to god.
TUFFTR
11-23-2013, 08:38 PM
I don't have a power supply like that :(
I fear this will be another 2-3 weeks of crap. Thanks guys. Helpful as always. Damn headphone jack...knew I should of replaced that ages ago.
TUFFTR
11-23-2013, 08:44 PM
being that the next few weeks are gonna be busy as all shit, I'll see if I can try the bench method. If I can't, I guess I'll needa contact Adam again.
surfersamu
11-23-2013, 08:58 PM
I was not being sarcastic, I just think is cool.
you could contact tactrix for now.. or test tactrix on another car...
No power supply no problem:
get it from your desktop computer
How to Convert a Computer ATX Power Supply to a Lab Power Supply (http://www.wikihow.com/Convert-a-Computer-ATX-Power-Supply-to-a-Lab-Power-Supply)
:)
TUFFTR
11-24-2013, 03:30 AM
Sorry dude. Not having the best day. Really struggling holding back right. taking it out on myself by eating a whole bunch of fast food.
There's a guy in Aus who should be able to fix this for me which is awesome as it means less postage $$ and less turnaround time.
Thanks guys.
TUFFTR
11-24-2013, 10:09 PM
Andddddddd sent off today to Merlin the ECU Wizard.
I think I'm going to retire from touching ECU's from now on. Too many bad experiences to warrant another stuff up even though I know my flasher jack is fixed now
yet again, thanks for all your help guys. made it an easy choice in knowing what the problem was.
TUFFTR
11-30-2013, 05:13 AM
SO, sent the ECU off to Merlin - some of you may have heard of him, and had a good half hour talk and many emails back and forth. He cannot seem to un-brick this.
So, That's royally fucked me. He has however tweaked some settings for my 3.5L. So my question if
Who in the US of A would like to try and unbrick this thing and hopefully look after me on price :P I've spent more $ now unfucking my mistakes then the goddam ECU and harness cost me. Goddam it.
TUFFTR
12-02-2013, 06:51 AM
If anyone could please fix my ECU - That would be awesome. Sad Paul is Sad.
99 vr4
12-02-2013, 09:43 AM
The only real fix is to have the CPU replaced. I usually cover the cost and just have my customers who are overseas pay actual shipping. .. Less than $50 usually.
I would contact whoever you got the ECU from to see if they will fix it for you.
Sent from my SPH-L720 using Tapatalk
99 vr4
12-02-2013, 01:25 PM
I was not being sarcastic, I just think is cool.
you could contact tactrix for now.. or test tactrix on another car...
No power supply no problem:
get it from your desktop computer
How to Convert a Computer ATX Power Supply to a Lab Power Supply (http://www.wikihow.com/Convert-a-Computer-ATX-Power-Supply-to-a-Lab-Power-Supply)
:)
Sam,
good link . . . just be careful on those conversions. So many used ATX power supplies really cannot deliver the specs they are rated for. Even GOOD (Like HP/COMPAQ SERVER) power supplies cannot deliver any real surge current. For instance, your standard 600 watt power supply, which SHOULD source around 40A on the 12 volt rail, will not actually supply you with 40A for long, if at all.
For instance, I tried to use one of these ATX conversions to power a 50 Watt UH Mobile Radio. Upon transmit, the inrush current was so great, that the power supply would shut down even though the inrush current was for a mere milliseconds! Now mind you, the radio (Motorola CDM-1250) was only rated for 20A, but a standard automotive 20A fuse will allow a much higher inrush for electronics. The fix was to use a car battery to supply the needed inrush current. A large cap might also have done the trick, but I had the battery handy and nearby.
The moral here is that while the ATX conversions are great for tinkering, I would NEVER use one for anything that could be bad if the power supply were to shutdown, like flashing an ECU or RADIO. A non-switching (linear) or lab grade power supply with current limiting would be much better as they don’t simply “shut off” when they think there is a short due to accidentally touching wires together or sense a large inrush.
Also, in regards to bench flashing our ECUs: Bench Flashing our ECUs is technically the SAME as flashing in the car. The only difference is you are eliminating the vehicle wiring harness and adapter harness if you have one. You are still using the OBDII method of flashing the ECU.
TUFFTR
12-02-2013, 05:28 PM
The only real fix is to have the CPU replaced. I usually cover the cost and just have my customers who are overseas pay actual shipping. .. Less than $50 usually.
I would contact whoever you got the ECU from to see if they will fix it for you.
Sent from my SPH-L720 using Tapatalk
Well, that's half the cost of what it set me back last time! Actually that would be very cheap for me. I've contacted Jester regarding this but haven't heard from him. Would you be willing to do this or are you not keen on touching things still in warranty?
If your keen to lend a hand please let me know! I've got a ROM to upload to it aswell. Can have it sent off by the end of the week.
Thanks Brett!
99 vr4
12-02-2013, 05:35 PM
If this is a jester ECU I would like to give him a chace to respond and see if he will make good on his warranty. If not I will help you out. Just pm me when you know which way you want to go.
Sent from my SPH-L720 using Tapatalk
TUFFTR
12-02-2013, 05:55 PM
If this is a jester ECU I would like to give him a chace to respond and see if he will make good on his warranty. If not I will help you out. Just pm me when you know which way you want to go.
Sent from my SPH-L720 using Tapatalk
Thank you SO much for the kind offer mate. Yeah I'm a bit pissed as it was a faulty adapter harness which caused this which is thankfully, know I know, the root of these issues (not low voltage etc etc)
Will keep in touch. Thanks Brett!
Greg E
12-02-2013, 06:48 PM
I sent a message to Merlin the other day about some ideas to try and recover it. Guessing he didn't have any luck?
TUFFTR
12-02-2013, 07:31 PM
I sent a message to Merlin the other day about some ideas to try and recover it. Guessing he didn't have any luck?
I don't think so. He had it all weekend and on Friday said he's exhausted all avenue's he can think of, even contacting other ECU specialists across Aus - still came up with the same flash error I had, Error at 0002C000!
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.