PDA

View Full Version : Radiator Temp Sensor Harness



mb3000
08-08-2013, 02:26 AM
Anyone willing to do me a favor and take a look at their temp sensor harness? Is it a part of the factory PS fan wiring or is it independent?

From what I see in ASA and what I remember from my old car I believe they are part of the fan wiring, but every picture of a fan for sale I cannot locate the connectors in the picture.

RealMcCoy
08-08-2013, 02:57 AM
Yes it's part of the fan harness... But it doesn't exist on a 2nd gen, so if you're finding pics of 2nd gen fans, it won't be there...

mb3000
08-08-2013, 12:00 PM
You're saying that the 2gen's had it wired into the main harness, or that they did not have any radiator temp sensors?

RealMcCoy
08-08-2013, 12:19 PM
2nd gens don't have the sensors... The fans are commanded by the ECU.

mb3000
08-09-2013, 02:53 AM
Thanks McCoy, I don't know what the hell I'm doing anymore.

This is what was confusing me in ASA:

http://i928.photobucket.com/albums/ad128/mb3000gt_photos/tempsensors_zps8f328b17.png

RealMcCoy
08-09-2013, 11:45 AM
ASA illustrations are usually pretty good, but not in this case... There is no differentiation in the pic between 1st and send gen, and it really doesn't look like either part....

The 1at gen motor assembly has a 6 pin harness plug, a connector halfway down to the resistor, and two connectors to the fan switches. The 2nd gen has a 4pin connector up top, with the resistor connection in the middle, but no other connectors.

Bleu
08-11-2013, 05:10 AM
I just dicked around with my fan harness since I was running into problems. The fan harness is prettymuch an entirely seperate system with how it works; however, some of the wires may be bundled together with the main harness. I know mine was wrapped together.