View Full Version : aluminum diff & subframe mounts?
rawavr4
08-02-2013, 09:16 PM
Can anyone with this combination comment on the noise? I just installed diff mounts and now I have to drop my subframe to do the aws delete thanks to a rusted line. I'm either going with new stock bushings or solids if I can find them. One off those " while you're in there" kind of mods.
anyonebutme
08-02-2013, 10:27 PM
Its a bit....whiny. you should be able to hear it in my vids.
JasonY
08-02-2013, 10:30 PM
I'd probably just do OEM subframes and the alum. diff bushings from Pampena. Should keep what actually moves in place(the diff) while not resonating much/if any noise into the chassis.
Jason
rawavr4
08-02-2013, 11:52 PM
Those are the diff mounts I installed. And the car drives 10x smoother. But I think I'll go with the oems since like you said, the diff did most of the moving around.
sublime_whatigo
08-03-2013, 03:02 AM
Last I knew 2 of the oem bushings were unavailable. Just an FYI before you press them out.
99ishVR-4
08-03-2013, 04:48 AM
Last I knew 2 of the oem bushings were unavailable. Just an FYI before you press them out.
Is it possible to press out the oem bushings and press them back in without ruining them?
Greg E
08-03-2013, 09:03 AM
Is it possible to press out the oem bushings and press them back in without ruining them?
No.456
Hans@GZP
08-03-2013, 12:31 PM
We stock the OEM rear subframe bushings.
fastfalcon94
08-04-2013, 01:52 AM
My old roomate had aluminum diff bushings and his dsm and it transferred a ton of noise through his car. That's why I made poly ones. Last picture is actually a video I made showing how much play each brand new stock bushing has. I have enough material left to make another set if you want to try this on your own:) I did this a few weeks ago but haven't got to try it out yet. I'm still waiting for GZP to ship my poly control arm bushings.
http://i1192.photobucket.com/albums/aa327/fastfalcon94/IMG_20130718_211022_360_zps94ec3df8.jpg
http://i1192.photobucket.com/albums/aa327/fastfalcon94/IMG_20130720_115936_073_zpscd550b12.jpg
http://i1192.photobucket.com/albums/aa327/fastfalcon94/IMG_20130721_084422_100_zps822e5cd2.jpg
http://i1192.photobucket.com/albums/aa327/fastfalcon94/IMG_20130721_145921_317_zps7d0f3ec8.jpg
http://i1192.photobucket.com/albums/aa327/fastfalcon94/IMG_20130721_145937_754_zps41382b7c.jpg
http://i1192.photobucket.com/albums/aa327/fastfalcon94/th_VID_20130721_093654_408_zpsae2b5cad.jpg (http://i1192.photobucket.com/albums/aa327/fastfalcon94/VID_20130721_093654_408_zpsae2b5cad.mp4)
Jimvr4
08-04-2013, 11:35 AM
No.456
It's a yes on the front subframe so idk why it's a no on these. Ball joint press FTW
Streamln1
08-04-2013, 12:25 PM
Did you do anything as far as adhesive to hold the poly in place so the diff doesn't shift from side to side?
fastfalcon94
08-04-2013, 03:50 PM
There is no place for any of the poly to slide. It pressed in tight and even if it could there would me no room for it to slide. Once you look at your subframe you will know what I mean.
Streamln1
08-04-2013, 11:37 PM
There is actually about 3/8 difference between the bracket and the mounts width, the sleeve the bushing mounts into could potentially slip either way under extreme circumstances, even though the poly itself may not move the sleeve could. Its a problem I have been trying to prevent in my build, I have pretty much the same thing
fastfalcon94
08-05-2013, 12:53 AM
I made it so that the poly that presses in for my diff mounts sticks out a little bit on each side of the mount. It's not the full width of the dowel pin, but it's wider than the stock mount. So my 3/8 difference is more like 1/8. I had to wiggle the brackets back in between the ears when installing them because they were snug. You can see here that the poly is slightly taller then the hole it was being pressed into.
http://i1192.photobucket.com/albums/aa327/fastfalcon94/IMG_20130718_211022_360_zps94ec3df8.jpg (http://s1192.photobucket.com/user/fastfalcon94/media/IMG_20130718_211022_360_zps94ec3df8.jpg.html)
fullracegt
08-05-2013, 04:52 AM
My old roomate had aluminum diff bushings and his dsm and it transferred a ton of noise through his car. That's why I made poly ones. Last picture is actually a video I made showing how much play each brand new stock bushing has. I have enough material left to make another set if you want to try this on your own:) I did this a few weeks ago but haven't got to try it out yet. I'm still waiting for GZP to ship my poly control arm bushings.
http://i1192.photobucket.com/albums/aa327/fastfalcon94/IMG_20130718_211022_360_zps94ec3df8.jpg
http://i1192.photobucket.com/albums/aa327/fastfalcon94/IMG_20130720_115936_073_zpscd550b12.jpg
http://i1192.photobucket.com/albums/aa327/fastfalcon94/IMG_20130721_084422_100_zps822e5cd2.jpg
http://i1192.photobucket.com/albums/aa327/fastfalcon94/IMG_20130721_145921_317_zps7d0f3ec8.jpg
http://i1192.photobucket.com/albums/aa327/fastfalcon94/IMG_20130721_145937_754_zps41382b7c.jpg
http://i1192.photobucket.com/albums/aa327/fastfalcon94/th_VID_20130721_093654_408_zpsae2b5cad.jpg (http://i1192.photobucket.com/albums/aa327/fastfalcon94/VID_20130721_093654_408_zpsae2b5cad.mp4)
nice job the video was pretty cool to i didn't realize how bad the oem bushings were lol
Streamln1
08-07-2013, 02:48 AM
I made it so that the poly that presses in for my diff mounts sticks out a little bit on each side of the mount. It's not the full width of the dowel pin, but it's wider than the stock mount. So my 3/8 difference is more like 1/8. I had to wiggle the brackets back in between the ears when installing them because they were snug. You can see here that the poly is slightly taller then the hole it was being pressed into.
http://i1192.photobucket.com/albums/aa327/fastfalcon94/IMG_20130718_211022_360_zps94ec3df8.jpg (http://s1192.photobucket.com/user/fastfalcon94/media/IMG_20130718_211022_360_zps94ec3df8.jpg.html)
Mine are the same way, the point I was trying to make is that even though the poly and the dowel may stay in place in the bracket, the eye itself that the bushing is pressed into could potentially slide on the poly itself, all 4 mounts face the same way so it could do so if its under enough force. It took a good bit of force to get my poly in too, but not as much force as there is going be placed on it while driving.
Streamln1
08-07-2013, 03:26 AM
http://i43.tinypic.com/erwtns.jpg - my bushings
fullracegt
08-09-2013, 04:38 PM
http://i43.tinypic.com/erwtns.jpg - my bushings
flawless.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.