sixsixfour
07-22-2013, 09:10 PM
http://www.3sgto.org/images/cotm/2013-07.jpg
Congratulations to Woz & his
1992 DODGE STEALTH RT Twin Turbo
Woz's Garage Link (http://www.3sgto.org/garage_vehicle.php?do=view_vehicle&id=23)
This has been my project for years. This has been fully built by me and of course some help along the way. Here is everything I can think of:
Exterior:
99 1st Gen Bumper
Staggered Ruff Racing r280 18" chrome (8.5 front 9.5 rear)
Wheel spacers
Slotted and drilled brakes
Removed banana wing
10k HID
Rear camber and toe arms
Megan coilovers
All new ball joints and tie rods
Interior:
Prosport gauges - Boost, Oil pressure, Water temp
AEM wideband A/F
Apexi SAFC 2
Pioneer 7" DVD player
New gauge cluster face
Short throw shifter and weighted shift knob
Under the hood:
CX racing FMIC
CX racing hard radiator pipes
HKS BOV
Polished plenum, valve covers, throttle body, etc
3rd gen lifters
Fuelab FPR with STM fuel pressure gauge
Made my own fuel lines as well as filter
550cc precision injectors
Fidanza Aluminum flywheel
Spec 3+ clutch
Tanabe knockoff exhaust with 3" downpipe
19T turbos
2 core radiator with slim fans
Battery relocation
Wiring tuck
Moved fuse box and AC box
Urethane motor mounts
Brian Crower Rods
Weisco Pistons with harden wrist pins
High Rev Springs
Forged Crank
I have an AEM management to put in and then get it tuned.
I might be forgetting a few things as well
Deletes:
AC, Cruise control, AWS, ABS, vacuum reduction and a few other
http://www.3sgto.org/garage_attachment.php?id=2009
http://www.3sgto.org/garage_attachment.php?id=1655
http://www.3sgto.org/garage_attachment.php?id=2351
http://www.3sgto.org/garage_attachment.php?id=2350
http://www.3sgto.org/garage_attachment.php?id=1654
http://www.3sgto.org/garage_attachment.php?id=1974
http://www.3sgto.org/garage_attachment.php?id=61
http://www.3sgto.org/garage_attachment.php?id=2349
http://www.3sgto.org/garage_attachment.php?id=2348
http://www.3sgto.org/garage_attachment.php?id=2347
Congratulations to Woz & his
1992 DODGE STEALTH RT Twin Turbo
Woz's Garage Link (http://www.3sgto.org/garage_vehicle.php?do=view_vehicle&id=23)
This has been my project for years. This has been fully built by me and of course some help along the way. Here is everything I can think of:
Exterior:
99 1st Gen Bumper
Staggered Ruff Racing r280 18" chrome (8.5 front 9.5 rear)
Wheel spacers
Slotted and drilled brakes
Removed banana wing
10k HID
Rear camber and toe arms
Megan coilovers
All new ball joints and tie rods
Interior:
Prosport gauges - Boost, Oil pressure, Water temp
AEM wideband A/F
Apexi SAFC 2
Pioneer 7" DVD player
New gauge cluster face
Short throw shifter and weighted shift knob
Under the hood:
CX racing FMIC
CX racing hard radiator pipes
HKS BOV
Polished plenum, valve covers, throttle body, etc
3rd gen lifters
Fuelab FPR with STM fuel pressure gauge
Made my own fuel lines as well as filter
550cc precision injectors
Fidanza Aluminum flywheel
Spec 3+ clutch
Tanabe knockoff exhaust with 3" downpipe
19T turbos
2 core radiator with slim fans
Battery relocation
Wiring tuck
Moved fuse box and AC box
Urethane motor mounts
Brian Crower Rods
Weisco Pistons with harden wrist pins
High Rev Springs
Forged Crank
I have an AEM management to put in and then get it tuned.
I might be forgetting a few things as well
Deletes:
AC, Cruise control, AWS, ABS, vacuum reduction and a few other
http://www.3sgto.org/garage_attachment.php?id=2009
http://www.3sgto.org/garage_attachment.php?id=1655
http://www.3sgto.org/garage_attachment.php?id=2351
http://www.3sgto.org/garage_attachment.php?id=2350
http://www.3sgto.org/garage_attachment.php?id=1654
http://www.3sgto.org/garage_attachment.php?id=1974
http://www.3sgto.org/garage_attachment.php?id=61
http://www.3sgto.org/garage_attachment.php?id=2349
http://www.3sgto.org/garage_attachment.php?id=2348
http://www.3sgto.org/garage_attachment.php?id=2347