PDA

View Full Version : Wanted Front Precat that fits a 99 SOHC



Dbeltran24
07-17-2013, 02:17 PM
I'm looking for a Front Precat that fits a 99 SOHC. Gutted prefered, but if not I can gut it myself.

Dbeltran24
07-22-2013, 03:02 PM
*bump*

stealthee
07-22-2013, 09:02 PM
If I could get ahold of a 3sx or EK2 Fed-spec downpipe I'd have a gutted pre-kitty to sell you.

Dbeltran24
07-30-2013, 05:37 PM
I have a 3SX fed spec down pipe that I tried to convert to cali, but didn't realize the rear pipe to the pre-cat is longer. Problem is my friend did a horrible weld job for the cali o2 sensors. It doesn't leak, but definitely is far from pretty. If you want it, you can have it.

stealthee
07-30-2013, 06:19 PM
Pics?

I can always have it worked over if I had to.

Like I said, the front pre-cat on my car is already gutted. Maybe we can work a trade deal. :)

Dbeltran24
07-30-2013, 06:33 PM
I'll get pics tomorrow.

Sent from my PG86100 using Tapatalk 2

stealthee
08-07-2013, 10:03 PM
Pics yet?

Dbeltran24
10-07-2013, 10:23 PM
59745975597659775978

Dbeltran24
10-07-2013, 10:24 PM
59795980598159825983

stealthee
10-07-2013, 10:39 PM
Wow, I forgot about this. Welds do look like shit, but what can you do? LOL

Just so I am clear, this is a 3sx Fed Spec pipe? Only "modifications" is the addition of the o2 bungs?

I am still interested in a straight up trade.

Dbeltran24
10-07-2013, 10:43 PM
Sorry it took so long for the pics.

By the way I forgot to mention the bolt holes wear off on the rear flang and wouldn't bolt to the rear precat without modification. The guy who did the 02 bung welds, cut it so it would bolt up. Wish he would have just widened the holes instead, but it bolts up fine. When I tried to install it on my Cali Spec car and delete the front precat, i'd have an exhaust leak from which ever flang I tightened last. Tighten the front first, rear would leak. Tighten the rear first, front would leak. That's how I found out the lengths were off between fed and cali.

Dbeltran24
10-07-2013, 10:44 PM
yeah. its 3sx fed spec before they went stainless steal. I should have still have the receipt for it

stealthee
10-07-2013, 10:46 PM
The flange being cut shouldn't be that big of an issue. Gasket will keep that from leaking.

I'll probably try to grind the welds and possibly get rid of the extra bungs. Worst case scenario I just plug the bungs.

BTW the reason the welds look like that is probably because I think the pipe is supposed to be stainless.

EDIT: Didn't see your post about it being before they went stainless, regardless I can probably get it cleaned up.

Dbeltran24
10-07-2013, 10:51 PM
Here's the link to the old 3sx pipe

Dbeltran24
10-07-2013, 10:53 PM
3SX NA Downpipe Custom Non-Turbo (Downpipe=Frontpipe)*-*Mitsubishi 3000GT*/*Dodge Stealth Parts (http://www.3sx.com/store/comersus_viewItemBundle.asp?idProduct=1063)

Dbeltran24
10-07-2013, 10:53 PM
If you still want to trade, then PM me a shipping address.

stealthee
10-07-2013, 11:01 PM
Hell yeah I am up for it. I may even just bolt it up as is (even though I know it won't completely seal) just to have a downpipe on it until I can get the fed spec conversion completed.

The only thing that sucks, is the last thing I did to the car was put the interior back in it. That will have to come back out to do the harness swap. LOL

I'll PM you the shipping address in a few.

Dbeltran24
10-07-2013, 11:11 PM
Well at least until you get it done, you have spots to put in the extra o2 sensors. If you don't want to throw a code, you could get the 3sx o2 bung extenders, or if you want to make them yourself go get the spark plug extenders from advance auto and bore them out. I compared the two and they are identical except for the inner hole. Actually now that I think about it, I have a set of those spark plug extenders, I'll throw that in the box too.

stealthee
10-07-2013, 11:16 PM
I don't have codes anyway. 94-95 get away with that. :D

Besides, the car is not on the road. I occasionally take it for a quick ride and mainly just don't want it to sit with open manifolds.

gs1000kat
10-12-2013, 10:14 AM
Did this deal happen? I have a non-gutted pre cat

stealthee
10-12-2013, 10:57 AM
Yeah, deal is going down. He has to find a box to ship his dp to me, and I need to find the time to yank the pre cat off the car.

Dbeltran24
10-31-2013, 01:52 PM
Sorry for the long wait. Finding a box was a pain. Ended up making a box. I'm heading to the UPS store now to ship it. I'll PM you a shipping number once I return.

stealthee
10-31-2013, 02:27 PM
Dave sorry for your wait too. Between work and odd weather I haven't been able to get under the car. Hopefully I only work half day tomorrow and am feeling better and can get the precat yanked off. I'll update you with shipping info as soon as I have it.

Dbeltran24
10-31-2013, 03:32 PM
No worries. I just dropped it of at the UPS Store. Waiting on UPS to send me an email with the tracking number. The Clerk said you should receive it on Monday.

stealthee
10-31-2013, 07:55 PM
That will work out perfect. I'm going to take it to work and let me maintenance guy look at it and see what he can do to clean it up. And since everyone else will be at SEMA and I am the one left in charge, I can do it and get away with it. LOL

stealthee
11-03-2013, 05:18 PM
Just a quick update for you. I got the precat and what was left of the downpipe yanked off yesterday. Going to take it to work and apply some heat to get the nuts off that hold the precat to the downpipe.

If all goes well it will go out UPS tomorrow.

stealthee
11-04-2013, 07:19 PM
Damn maintenance guy called off today and I have no idea where he has some of his stuff stashed so I have to wait until tomorrow to get the precat separated from the rest of the downpipe. Hopefully can get it out to you tomorrow.

Going to have my maintenance guy take a look at the downpipe too to see if he can either take the added o2 bungs off, or just clean up the bubblegum welds and I will just plug them

Thanks and as long as it goes out tomorrow I will send you tracking.