PDA

View Full Version : 95 VR4 DR16T first drive, finally!!!



deemo99
10-02-2010, 01:34 PM
After countless hours and a known amount spent we finally got to take her for a spin this morning! That is the biggest grin I have had on my face for only 15 miles that I can remember. I was originally hoping to make it to the NG, then hoping for the 4th of July, then by my birthday (July 23), then my friends wedding in August, then I tried to stop predicting dates because as we all know during a build one thing leads to another. I guess I should have guessed October 2nd:rolleyes:
http://i214.photobucket.com/albums/cc178/MrDeemo/phone%20pics/togetheragain.jpg
I will post some pics later, but here is one so I don't get a fail for no pics, lol.

Mods:
DR16T's
ARC2 83mm
550cc's
Supra pump w 3sx hotwire kit
AEM A/F, boost, & oil pressure gauges in the stock center location
GReddy/GT Pro FMIC (thank you demonscoach)
RPS max with full face
IPO mbc
Stillen dp
Tanabe Touring exhaust
3sx lip, front active aero delete, aero simulator
A/C delete
Tomei bov
3sx Fuel Lab AFPR kit w oem filter (for now)
3sx fuel rail loop
HHH datalogger
New OEM oil cooler lines and many other gaskets/seals
New OEM oil pan
ThermalFlex radiator hoses
Pampena Motorsports rebuilt trans w Ray's bellhousing brace and a quadco XR output shaft (thank you Ray, smooth as butter and at an awesome price!)
Maximal Performance solid motor mounts

I have a small leak in the TB I need to address and am guessing that is what is causing my A/F to run how it is, but it's alot better with the Tomei bov since the oem one was mostly to totally useless due to leaks. She's indicating rich pretty much everywhere which is better than lean I guess. I range from 10.6-14.5 around town, no boost. I am hoping I can let this slide until mother nature brings the snow, some advice here would be much appreciated. Oil pressure is in the normal range and temps topped out at 206F through several stop signs each block downtown. Highway she stayed right around 190-195F which also seems ok to me. I used some of the old plastic ducting to make my own ducts/air directors. It is super nerveracking to drive right now because I don't want anything to go wrong, but so far so good and I can't wipe the smile off of my face:) I stopped by work to show a few people who've been interested in what I've been up to all summer since it hasn't been the usual summer which normally means lots of fishing. The new exhaust smell is driving me nuts since each time I get out to double check for leaks etc I say, "What's that smell?! oh yeah:o"

I am new to tuning and logging so I have lots to learn and only a bazillion questions. Such as should I monkey with my ARC settings or leave them where they are at? Per Matt I have them set at "+2 , Mid -7, High +6, Lo +2".

I tried to keep the interior as simple as possible, not a big fan of gauge pods and the like so I pulled the dash and put the AEM's in the center. While this was a PITA, I am actually very happy with how it turned out and will post pics so you can see. The pics I have posted up in other threads were not with a full interior, it looks much better all put together. I also don't like tinted windows like I once did so I didn't want anyone to have a reason to put their elbow through a window. To me gauge pods just scream come steal my shit. Like a huge stereo sticker on your car says raid my trunk, please. Stock stereo etc, boring, nothing to see in here or want to take, keep moving.

I have to pull the front bumper AGAIN to shave some more. We have some small gaps around the headlights and I don't care for the angle the splitter is sitting at. I am thinking that getting the bumper shave correct will take care of the splitter issue, but for now since I need to get the clutch break-in done it should be fine.

I want to thank everyone on the "other" site for all of your posts over the years, I hope to help contribute more to 3sgto as I did more lurking and dreaming there than anything really.

Special thanks, in no particular order except the first one, to my beautiful wife, Danielle, for not flinching at the cost and time it took to get this far. She has been nothing but supportive and is as excited as I am to be at this point, I am one lucky dude. Matt at Dynamic Racing, Ray Pampena, 3SX, IPS, Terry for the mounts, Alan for making a new and improved forum to post this info, everyone at work who had to listen to me ramble on about boost, Quin and Lynn for the advice machining and welding, Danielle Robel Smithrz and Brian for the help wrenching, along with several members who sold me good parts through the classifieds helping to save me some $crilla!

More pics to come, thanks for looking!

green-lantern
10-02-2010, 03:45 PM
Congratulations! It's a great feeling to drive the car after a long build but it's also nerve racking because you're so paranoid listening to every little noise.

green-lantern
10-02-2010, 03:49 PM
BTW in your avatar pic you look like Adam Sandler lol I swear!

deemo99
10-02-2010, 07:25 PM
BTW in your avatar pic you look like Adam Sandler lol I swear!

When I read that I actually did lol. I used to hear that back in the day at college sometimes, maybe it was the half-moon eyes from too much party time:54: Enzo (our great dane) looks funny in the pic too with his giant nose.

We put a total of around 65 miles on today ears at full alert and Danielle watching the temp and knock. At about 2k rpm in 4th gear it will go to 10.0 on the wideband! If I close the throttle all the way it will lean out and stay around 14 before slowing moving richer and richer. I will pressure test again, but the only known leaks are from the seals on the throttle plate shaft. Anyone else had or have this issue? I may try to swap my TB from the 99 since it's sitting in my closet, but given it is 11 years old I am not sure if that will really solve anything so I am thinking rebuild the 99 TB and then swap.

I love the solid motor mounts, I think it's far easier to drive smooth with them, but it has been far too long since I have had a fun car to drive. My daily is a 2000 Chevy pickup so anything feels like a rocket, even with no boost yet:p When I bought this car back last year it had exhaust leaks etc and really needed some love.

The front turbo return line has a small leak at the pan which I should be able to fix easy enough since the bolt/washer I used should have been replaced. Other than these two things, everything seems good so far.

DocWalt
10-02-2010, 07:30 PM
e high five for birthday buddies :p

Sounds like a hell of a car, dude! More pics :D

Atrosity
10-02-2010, 09:59 PM
Glad everything is working out for ya man, I hate the paranoia of the car not running right.

deemo99
10-03-2010, 09:12 PM
Swapped the TB from the 99 today, no leaks at the seals anymore and the Tomei bov held 25psi during pressure test. Still rich at idle, did not identify any leaks so am wondering WTF. On a short drive turbos sound better, but A/F is still incosistent. When I let off of the throttle and go straight vacuum the wideband goes full lean and reads 3 bars, doesn't even register in numbers anymore! At cruise and light load there is random occasional dithering from the front O2. It seems random when I get some good variation and then with no warning or apparent reason (that I have figured out yet anyway) the wideband goes full rich and O2 voltage goes to .95-.97V. HHH showing around .95V for the most part with only small changes here and there during our drive. Even without some dithering sometimes the A/F stays 12.0-14.8 and then she'll start to creep toward rich, let off gas and then she goes to super-lean-land. Oh yeah, let off gas and front O2 goes to almost 0.0V.

I am going to replace both O2's as I don't know when they were last. I may try a swap with the 99 O2's since the primary's are the same on 93-99 but those have almost 60k on them too, but since they aren't being used it's a quick fix, maybe--I won't hold my breath. I will also pressure test AGAIN, but am definitely confused a little.

I will check for an exhaust leak I don't hear and double check the AEM sensor is tight, but what else am I missing??? ECU looks good, no discolor funky smell etc. hrmmmmmmm.....

Oh yeah, here some moar pics too....

Holy crap, 10.0!!!
http://i214.photobucket.com/albums/cc178/MrDeemo/phone%20pics/IMG00119-20101002-1327.jpg

Little fast on the shutter speed, only caught partial readouts, above pic is from phone.
http://i214.photobucket.com/albums/cc178/MrDeemo/95VOctober32010020.jpg

http://i214.photobucket.com/albums/cc178/MrDeemo/95VOctober32010016.jpg

http://i214.photobucket.com/albums/cc178/MrDeemo/95%20VR4/95VOctober32010013.jpg

Car's dirty from the rain yesterday and some temporary things going on under the hood until I can get this sorted out.

Gonna watch MotoGP on the DVR, just saw Pedrosa broke his collar bone on Friday, this will be interesting....

terrets
10-03-2010, 09:18 PM
Gratz on getting it running. Looks very nice. I should have bought AEMs :/. Is that a WI plate I see? hah

Austin@STM
10-03-2010, 09:29 PM
Car looks good with the AEM guages in the dash. Congrats on getting it running.

familyMAN
10-04-2010, 12:00 PM
where did you put your water temp gauge?

deemo99
10-04-2010, 12:53 PM
where did you put your water temp gauge?

Just reading the temp on the datalogger until I trust everything and can then rely on the boost and A/F. I kinda wish I had another gauge or two, but I'll wait until I decide what to do stereo-wise, stock for now. The radiator ducting I made from the old stuff is not too fancy, to say the least, but so far the highest I've seen is 213F, usually stays 193-203F.

Thanks for the compliments everyone, I am really happy so far with how everything turned out. I hope to get this A/F issue straightened out by the weekend. That is indeed a WI plate btw;)

skyrunner
10-04-2010, 01:04 PM
Your A/F sounds exactly where mine was at when I finally installed a wideband. I pressure tested multiple times and finally came to the conclusion that the stock ECU might just be that rich. I was able to tune it out with my SAFC2, pulling a lot more than I expected everywhere. I am down to -11% in some places. Anyway, it seems to be running right, but I occasionally get some bizarre knock when in closed loop now and just barely on the throttle. Never a lot, just a few counts. I will be keeping it where it is at and trying to improve the tune next year when I can afford a few other mods (injectors and afpr). If you figure out the rich A/F is coming from something else let us know and I can check my car at that point too...

terrets
10-04-2010, 06:05 PM
Just reading the temp on the datalogger until I trust everything and can then rely on the boost and A/F. I kinda wish I had another gauge or two, but I'll wait until I decide what to do stereo-wise, stock for now. The radiator ducting I made from the old stuff is not too fancy, to say the least, but so far the highest I've seen is 213F, usually stays 193-203F.

Thanks for the compliments everyone, I am really happy so far with how everything turned out. I hope to get this A/F issue straightened out by the weekend. That is indeed a WI plate btw;)

Nicee.. where in WI? Can I get a ride in your car if I drive to you? :lol:

deemo99
10-06-2010, 09:25 AM
Nicee.. where in WI? Can I get a ride in your car if I drive to you? :lol:

I do get to the valley occasionally (I'm in Door County) and def want to get some miles in before the snow starts so maybe I will bring it there.

Swapped the rear O2, the one that was there looked like aids. Front O2 is next. Trimmed some more bumper and it fits waaaayyy better now. Found no exhaust leaks. Will re pressure test yet again, hoping to get this damn A/F straightened out. Have to be in GB for some work stuff tonight so no more wrenchin til Thursday evening.

terrets
10-07-2010, 01:45 AM
That would be AWESOME. Maybe Ill get mine running soon if I get an ecu. Registration is only until end of October though. GL with the A/F crap.

deemo99
10-08-2010, 12:16 AM
Success, mostly....completed another pressure test and did find a couple of leaks which are now gone. Thanks for the help, Brian!! Went for a drive and experienced some of the richness as before, but definitely seems to have an identifiable patter now, I think. I am going to put new plugs in Friday after work and I think I'll have everything straightened out then. Watching the logger, boost, and wideband I am convinced the plugs are poopdick and are responsible for the richness. At light loads the wideband is good, but get any amount of load of closer to no vac and 0 boost and richness is still the flavor of the day. The front O2 actually does something now and I get dithering until I get past the light load situation I described. Wires are new, have not tested other ignition parts, but I feel that spark is now the problem.

heptone182
08-12-2012, 08:22 PM
I know this is an old thread but how's she running now? I'm curious because I'm setting up pretty much the same setup you're running. Only difference is I'll be using 750cc injectors and a 90mm MAF and water/methanol. Any tips?