PDA

View Full Version : Overdrive Pulley on Alternator



Patryn
07-03-2013, 02:11 PM
What is a reliable solution to prevent belt slippage when using an overdrive pulley on a 3000GT alternator? I bought a new high output alternator, but for the life of me the belt slips on the alternator pulley, I'm thinking to the small pulley size. I did change belt size to compensate for decreased diameter so it would have the right amount of tension. Just wondering if any of you guys have been through this scenario and what might have worked for you.

anyonebutme
07-03-2013, 03:26 PM
sounds like you don't have enough tension on it

Chris@Rvengeperformance
07-03-2013, 03:27 PM
the alt/ac belt needs to be tight enough to play a tune on it or it will slip

Patryn
07-03-2013, 09:41 PM
I did it up pretty tight, but I'm just not sure if it is because of the very small pulley and angle of the pulley not giving it enough contact patch. I guess I'll try a different brand belt, maybe its a belt quality issue with the smaller pulley. If it matters it is one of the PowerMax brand alternators 220amp in case anyone else has had any experience with that unit.

CoopKill
07-04-2013, 09:54 PM
Every time I change my belt, or do maintenance I think I get the belt tight enough, and every time I have to re-tighten the crap out of it.