PDA

View Full Version : Just put 200 miles on my new engine.



blindmist
10-01-2010, 06:08 AM
Well I went on another copper washer hunt today just to see if I could at least find 2 10mm washers to get the turbo oil leak fixed. I found some SAE ones that were close enough. I put them on, fired it up, no leak. I let it go through the warm up, shut it off, let it sit for about 5 mins, changed the oil, fired it up and went driving. There was no metal in the oil at all, just oil and lubriplate.

The oil cooler lines are leaking, but BARELY. So I just couldn't wait and drove it around town for a bit. Then I went and got my dog and put another 110 miles on it with him in the car.
This will all be fixed soon courtesy of STM. Thanks again!!

Within the first 5 minutes of having it out on the road, I had already been asked what the top speed was. :lol: This car has sat for a year, looks like shit, but it obviously sounds great. I got complemented on 3 different occasions tonight alone! I miss that shit!

There is even a noticeable difference going from 8:1 to 8.5:1 The throttle is much touchier, and cruising takes no effort what so ever. Tomorrow I am going to be going around logging on it all day. I just wanted to have my time with my baby for the first time in a year. It was awesome.

Edit: Here is the facebook photo album. http://www.facebook.com/album.php?aid=2001273&id=1534110019


Had a cracked piston, this is what caused the rebuild obviously.
http://imgur.com/eUAQG.jpg

http://imgur.com/DGRTZ.jpg
http://imgur.com/YZ5UL.jpg
http://imgur.com/tAhQQ.jpg
http://imgur.com/KyF7O.jpg
http://imgur.com/GtSYI.jpg

WOW my garage is dirty!! It was not this dirty for most of it. I think it was only dirty like that for maybe 3 days or so.

colt45 gto
10-01-2010, 06:23 AM
hope you cured oil the leaks, now enjoy it bud :)

blindmist
10-01-2010, 06:23 AM
hope you cured oil the leaks, now enjoy it bud :)

Oh I will, now to kick cigarettes!

VR-4 0wnz j00
10-01-2010, 10:06 AM
Congrats man, enjoy it!!

Austin@STM
10-01-2010, 11:00 AM
Congrats man, enjoy it!!

Was gonna say the same thing.

blindmist
10-01-2010, 04:24 PM
Check the facebook album out.

http://www.facebook.com/album.php?aid=2001273&id=1534110019

Austin@STM
10-01-2010, 08:26 PM
Did the washers make it to you today?

colt45 gto
10-01-2010, 08:42 PM
Check the facebook album out.

http://www.facebook.com/album.php?aid=2001273&id=1534110019

i see what you did there!

CoreyB
10-01-2010, 08:48 PM
Nice work.

blindmist
10-01-2010, 08:57 PM
Did the washers make it to you today?

Yes, I have already changed out the oil cooler washers with the new ones and no more leaks at all!! Thanks again!

CoreyB
10-01-2010, 09:02 PM
I completlely know what its like with the garage. I rebuilt my engine in a garage thats about 12 x 20. Still beats working outside though.

deemo99
10-01-2010, 09:03 PM
We are going on 1 year too!! How fast IS that thing? Are you going to a track this year?

Tomorrow we get to drive for the first time, want to get some miles before the weather really starts to suck.

blindmist
10-02-2010, 12:02 AM
I am not sure how fast it is yet. I have it set to 9.5psi and I am still on my 360's (i know my picture up there shows my 550's). Once I get done with break in I am going to make the trip to Dallas with the EMU and everything else and get someone to tune it for me. Then we can really see what it will do.

Also, I am scared to launch it. I noticed the the short upper bolt for the TC the bell housing is broke where the bolt goes in. I don't know if I am going to take it to the track this year. Probably not, I will wait till spring opens up.

deemo99
10-02-2010, 02:24 PM
I am scared to launch as well, but hard to get a slip without it, unfortunately. We just put 15 miles on today which felt great, albeit somewhat stressful listening for weird noises and asking wifey what the temp is and if we have any knock! I am a little rich though and scared to damage anything by being so rich.....

Keep us updated when you get everything tuned!

blindmist
10-02-2010, 04:50 PM
I am scared to launch as well, but hard to get a slip without it, unfortunately. We just put 15 miles on today which felt great, albeit somewhat stressful listening for weird noises and asking wifey what the temp is and if we have any knock! I am a little rich though and scared to damage anything by being so rich.....

Keep us updated when you get everything tuned!

LOL. I have to watch everything myself. My loserness with this car has probably cost me relationships lol.

Seriously though, I have to work myself up to drive this car, and when I get in it, I am shaking because I am so nervous something is going to break. There is now about 400 miles on the engine. I want to boost again!! 300 more miles to go till I can put the full synth in and turn the boost up.

I am rich too, but I think it is because I went from the stock FP to a Walbro 255. Just barely rich at idle, it seems to be ok when under a load at 9.5psi with 0 knock. Although, my upper AC/Alt idler pulley is going bad, causing belt chirp, and I can pick it up on the knock.

STM is saving my ass again. Seriously Austin, thank you so much for all of your help.

Austin@STM
10-03-2010, 11:06 PM
LOL. I have to watch everything myself. My loserness with this car has probably cost me relationships lol.

Seriously though, I have to work myself up to drive this car, and when I get in it, I am shaking because I am so nervous something is going to break. There is now about 400 miles on the engine. I want to boost again!! 300 more miles to go till I can put the full synth in and turn the boost up.

I am rich too, but I think it is because I went from the stock FP to a Walbro 255. Just barely rich at idle, it seems to be ok when under a load at 9.5psi with 0 knock. Although, my upper AC/Alt idler pulley is going bad, causing belt chirp, and I can pick it up on the knock.

STM is saving my ass again. Seriously Austin, thank you so much for all of your help.

Glad i was able to help. We'll get that pulley to you ASAP so you start driving with one less thing to worry about.

TonyM
10-04-2010, 11:50 AM
Good luck! Fresh builds are fun, I've got about 17k on mine since 2006!


I am rich too, but I think it is because I went from the stock FP to a Walbro 255. Just barely rich at idle, it seems to be ok when under a load at 9.5psi with 0 knock.

Did you do an AFPR? A hotwired 255 with the resistor bypass will overrun a stock FPR. I have a hotwired 255 with an Aeromotive AFPR and it idles 14.7-15.1 all day long. Might be worth a look.

blindmist
10-04-2010, 12:55 PM
Good luck! Fresh builds are fun, I've got about 17k on mine since 2006!



Did you do an AFPR? A hotwired 255 with the resistor bypass will overrun a stock FPR. I have a hotwired 255 with an Aeromotive AFPR and it idles 14.7-15.1 all day long. Might be worth a look.


No AFPR, but I am planning on it once I can get some more money in. The Walbro is hotwired, but I didn't bypass the hi-lo from the stock ECU, so I think the stock FPR is doing fine for now. I am not smelling it running rich at all except BARELY at idle, which could also just be no cats.

Hopefully soon I can get a Wideband put in this thing. I am fairly decent with how narrow band works and it cycles at idle about once every minute for about 10s, then will go to low.

Of course, the wideband will be before the AFPR. It still is running great too with 520 miles on it now.