View Full Version : Wanted WTB: Pair of TT Heads with cams
akotten
05-31-2013, 10:22 AM
So just found out last night my heads are trashed. I'm looking for a set of TT heads and a set of cams to go with them. 1st gen or 2nd gen, either or, I'll make them work. :)
-Alex
FeaRpb
05-31-2013, 10:54 AM
Hmmmmmm, I totally have a set just sitting in my garage.
How much are you looking to spend?
akotten
05-31-2013, 10:57 AM
Hmmmmmm, I totally have a set just sitting in my garage.
How much are you looking to spend?
I suppose that depends on their condition. :) I was thinking around $300
akotten
06-03-2013, 10:15 AM
PM's replied. Monday bump....
Roybatty
06-03-2013, 01:49 PM
So just found out last night my heads are trashed. ...
How did you determine heads trashed....smoke @ idle? Opened her up?
akotten
06-03-2013, 02:34 PM
How did you determine heads trashed....smoke @ idle? Opened her up?
I have them torn down on my bench. All of the cam journals are severely scored. The cams themselves are also scored because of it. It's pretty ugly. I should snap some pictures.
Roybatty
06-04-2013, 09:00 AM
Yes, post some if its not too much effort. I was interested to also see if there was some performance issue you may have noticed with them being all bunged up.
I am seeing some smoke on engine decel down significant hill.
akotten
06-04-2013, 10:15 AM
Yes, post some if its not too much effort. I was interested to also see if there was some performance issue you may have noticed with them being all bunged up.
I am seeing some smoke on engine decel down significant hill.
Well these were recently rebuilt with new valves and seals. It's likely either your valve stem seals or your turbos. There were not any issues with mine other than the noises they made (valvetrain ticking). The motor has a history of spun bearings. Most of the new 3mm bore lifters were now "solid" lifters when I disassembled them. Only took 1000 miles unfortunately. The good news is that my crankshaft is nearly perfect still, new as of 1000 miles ago. The heads are the last thing to get oil, so there must have been debris in the block after the oil feeds the crank. I'll know more once I get my parts washer and can try to flush the bad heads to see what comes out.
akotten
06-12-2013, 03:39 PM
Still looking for heads. Will also accept just the TT cams for now. It seems there are many heads without cams to choose from.
akotten
06-19-2013, 04:37 PM
Bump...
myhomieg
06-23-2013, 03:59 AM
heads with cams $400 shipping is gonna be $100, heads need valves, or i have a set of freshly rebuild heads for $750 with cams
akotten
07-11-2013, 04:02 PM
Bump! Still looking for a complete set of heads
akotten
07-15-2013, 10:41 PM
Bump...
NightRider01
07-20-2013, 03:02 PM
I have a pair of VR-4 heads off a 92 with cams. The heads have about 98K miles on them. I can have them resurfaced and shipped for $550
akotten
08-02-2013, 10:50 AM
I have a pair of VR-4 heads off a 92 with cams. The heads have about 98K miles on them. I can have them resurfaced and shipped for $550
PM sent.
akotten
08-04-2013, 03:47 PM
My budget has now changed quite a bit. Looking for some quality heads. Bump...
Roybatty
08-04-2013, 04:18 PM
Hey I recently saw heads for sale on ebay... Just FYI
Revel in your time
akotten
08-04-2013, 04:42 PM
Hey I recently saw heads for sale on ebay... Just FYI
Revel in your time
Buying heads off of Ebay sketches me out...
akotten
08-04-2013, 04:45 PM
Anyone ever buy new heads from Cherry Hill? Confused what all comes with them. It just says cylinder heads with valves.
Art Of Jammin
03-07-2014, 05:20 AM
I have a set if you still need them
Sent from my HTC0P3P7 using Tapatalk
Have a set of heads/cams still wrapped up on the shelf but not sure if you're looking for built?
Stage 3 heads: WebCam Race Cams, Fidanza Adj Gears, 3SX +1/+1 Inconel Valves, 3SX High Rev Springs, 99 lifters
Art Of Jammin
04-13-2014, 02:08 PM
How much ^
And I have a set with new vss, not the prettiest but they came off my running car, only thing they need are rockers
I'll sell them cheap or if you have trades I may be interested
Sent from my HTC6525LVW using Tapatalk
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.