PDA

View Full Version : DR650 Set-up



daerdevil_1987
05-23-2013, 01:16 AM
Okay so after a couple of days of thinking and researching , i got a rough idea of the set up I'm going with ;However I need some help with the brands and the places to buy it from ( Open to all suggestions)

here's the List:-


DR650
99 flashable ECU
Palm/notebook/laptop
Boost control
Turbo timer Type 1
550cc Injectors
Fuel pump
Fuel filter
Fuel pressure regulator
Fuel pressure gauge
Wind Band
Air/fuel gauge
Oil pressure
Boost gauge


If i missed anything or things i might need/not need , by all mean .


For now going to buy Stage V clutch , outer shaft and light flywheel since my stage 2 clutch is slipping :/

after that Amazon.com: DNA, CBE-3000GT-T, DUAL 4 INCH TIP ALL THE WAY SS DOWNPIPE/TURBO/CATBACK EXHAUST MIT 3000GT GTO: Automotive (http://www.amazon.com/DNA-CBE-3000GT-T-DOWNPIPE-CATBACK-EXHAUST/dp/B00CO79ACG/ref=sr_1_3?ie=UTF8&qid=1369087136&sr=8-3&keywords=3000gt+downpipe)

then saving for the big setup.

ICPREY
05-23-2013, 01:23 AM
I don't think you need a wind band :D

J-Groove
05-23-2013, 10:21 AM
DR650 - www.dynamicracing.com
99 flashable ECU - Chromed ECU | 3SGTO Flash Tuning (http://www.chromedecu.org)
Palm/notebook/laptop - ASUS Eee PC X101CH-EU17-BK 10.1" Netbook Matte Black - Newegg.com (http://www.newegg.com/Product/Product.aspx?Item=N82E16834230807) but you will want to upgrade it to 2gig. Easy to do. These are great because it will fit in your glove box.
Boost control - You can use the Flash ECU, to do so you will need a EVO MAP, buy from Mitsu or a car part out on the EVO forums.
Turbo timer Type 1
550cc Injectors
Fuel pump - Aeromotive, Supra, or Walbro (sp?) Ninja has great prices
Fuel filter
Fuel pressure regulator - Very happy with my AEM FPR, picked it up from www.maximalperformance.com
Fuel pressure gauge - Came as a kit
Wind Band - I have an LC1 innovate, but the PLX looks awesome PLX DM-6 SM-AFR | Wideband Air Fuel Gauge (http://www.plxdevices.com/product_info.php?id=WDBDSMAFR_DM6) this will replace one of your narrowbands
Air/fuel gauge - Blackstealth Black Box
Oil pressure
Boost gauge - Blackstealth Black Box


You will also need to pick up a new MAF. EVO/Montaro MAF works great for your power goals. Pick it up from www.chromedecu.org as well.

Street_Chally73
05-23-2013, 10:14 PM
I know that deep down you really just want to buy a Stealth TT & get rid of that olive pearl 3000GT... :D :D

GL with getting everything you'll need for the upgrades, Nadeem! ;)


Sent from the garage

TwIzTeD_3kGt
05-23-2013, 10:49 PM
Add a fuel pump hotwire kit, I think Ninja Performance has one, I used the STM kit.

Denso Supra fuel pump

Might as well go with Evo 560CC injectors, cheaper than any 550's you'll find.

You'll want to PM Jester's Dedd about the flashable ECU, his are plug and play, no adapter harness needed.

Same exhaust, less money: http://www.ebay.com/itm/Mitsubishi-3000GT-1991-1999-VR4-3-0L-6G72-V6-Stainless-Steel-Catback-Exhaust-Sys-/281104196733?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3A3000GT%7CSubmodel%3AVR-4&hash=item41731da47d&vxp=mtr

How about a front mount intercooler? Or upgraded side mounts?

Boost4VR4
05-23-2013, 10:58 PM
Why do you want to upgrade the exhaust? Your exhaust will flow just fine and the ATR exhaust you have is nice...

daerdevil_1987
05-24-2013, 12:03 AM
I know that deep down you really just want to buy a Stealth TT & get rid of that olive pearl 3000GT... :D :D

GL with getting everything you'll need for the upgrades, Nadeem! ;)


Sent from the garage

Is that an offer ??? how much ;)

daerdevil_1987
05-24-2013, 01:03 AM
Okay let's see


DR650---------------------------------Dynamic Racing (http://www.dynamicracing.com)
ECU-----------------------------------Chromed ECU | 3SGTO Flash Tuning
Palm/notebook/laptop------------------ASUS Eee PC X101CH-EU17-BK 10.1" Netbook Matte Black - Newegg.com
Boost control--------------------------Using ^^^^ but i like the psychical one ( any ideas )
560cc Injectors------------------------EVO injectors
MAF-----------------------------------EVO/Montaro
Fuel pump-----------------------------Walbro 340 or Denso + hotwire kit ( Ninja )
Fuel filter------------------------------Come with the fuel pressure regulator and gauge www.maximalperformance.com or
Fuel pressure regulator-----------------Ninja Performance FPR/Gauge/Filter Dual Feed Fuel System (NP-3SDF) - Ninja Performance - Affordable (http://www.ninjaperformance.com/ninja-performance-fprgaugefilter-dual-feed-fuel-system-p-267.html)
Fuel pressure gauge--------------------^^^
Wind Band-----------------------------PLX DM-6 SM-AFR | Wideband Air Fuel Gauge
Air/fuel gauge--------------------------APEXI SAFC 2 or Neo
Boost gauge---------------------------^^^^

Turbo timer Type 1---------------------Not sure about that yet HKS Turbo Timer - Type-0 & Type-1*-*Mitsubishi 3000GT*/*Dodge Stealth Parts (http://www.3sx.com/store/comersus_viewItemBundle.asp?idProduct=29206)
Oil pressure----------------------------I guess any kind



I'm trying to keep the stock look on the car so most likely I'm going with the side mounts. I'm keeping the stock ones for now but I'm changing them diffidently.

Keven If I keep the one I have I need to get rid of the Cat, maybe that all what I need to do.

TwIzTeD_3kGt
05-24-2013, 07:42 AM
Front Mount Intercooler Kit for Mitsubishi 3000GT VR-4 & Dodge Stealth TT - Intercoolers - Pampena Motorsports (http://store.pampenamotorsports.com/intake-intercoolers/front-mount-intercooler-mitsubishi-3000gt-vr-4-dodge-stealth-tt.html)

Choose black pipes to keep it looking stock, most people won't know.

Ange
05-24-2013, 08:06 AM
or you dual core fmic and hook it up to oem piping and you don't have to deal with surge issues. paint it black for discrete look. good for 700hp. I can recomend the kit that oohnoo on here sells.

decent smics cost alot. save your money for other mods unless you're loaded. the dsm's are old now and usually not in great condition.

just my 0.02$...

DK77
06-28-2013, 03:47 PM
As far as the clutch goes, I would stay away from SPEC... I have had a SPEC stage 2 and it only lasted 10-15K before the disc partially melted to the pressure plate. Personally, I would go with the RPS Maxx with either the 6-puck or the OEM disc. I'm sure there will be other things you are going to run into as well.

One thing that was mentioned was the MAF, you'll want to upgrade that, IMO a GM MAF would be a good idea to help free up more airflow and make more power than with the Montero MAF.

What fuel are you planning on running? To truly take advantage of your billet turbos, you would need more than just pump gas.

Another thing to consider is if you will be launching the car you will need to upgrade the trans/t-case with at least a bellhousing brace if you're 6-speed or a transfer case brace if you're 5-speed.

If I think of anything else I'll post it.

CoopKill
06-28-2013, 04:48 PM
As far as the clutch goes, I would stay away from SPEC... I have had a SPEC stage 2 and it only lasted 10-15K before the disc partially melted to the pressure plate. Personally, I would go with the RPS Maxx with either the 6-puck or the OEM disc. I'm sure there will be other things you are going to run into as well.

One thing that was mentioned was the MAF, you'll want to upgrade that, IMO a GM MAF would be a good idea to help free up more airflow and make more power than with the Montero MAF.

What fuel are you planning on running? To truly take advantage of your billet turbos, you would need more than just pump gas.

Another thing to consider is if you will be launching the car you will need to upgrade the trans/t-case with at least a bellhousing brace if you're 6-speed or a transfer case brace if you're 5-speed.

If I think of anything else I'll post it.

This, but not so sure an oem clutch will hold what you are going to see power wise. I went with Ninja, and a South Bend 4fe. I will be using the Montero maf, and if it seems inadequate a gm or similar with maft goes in.


Edit: reading failure, rps with an oem style = good, not oem clutch for the power.

guido1205us
06-28-2013, 05:53 PM
Okay let's see


DR650---------------------------------Dynamic Racing (http://www.dynamicracing.com)
ECU-----------------------------------Chromed ECU | 3SGTO Flash Tuning
Palm/notebook/laptop------------------ASUS Eee PC X101CH-EU17-BK 10.1" Netbook Matte Black - Newegg.com
Boost control--------------------------Using ^^^^ but i like the psychical one ( any ideas )
560cc Injectors------------------------EVO injectors
MAF-----------------------------------EVO/Montaro
Fuel pump-----------------------------Walbro 340 or Denso + hotwire kit ( Ninja )
Fuel filter------------------------------Come with the fuel pressure regulator and gauge www.maximalperformance.com or
Fuel pressure regulator-----------------Ninja Performance FPR/Gauge/Filter Dual Feed Fuel System (NP-3SDF) - Ninja Performance - Affordable (http://www.ninjaperformance.com/ninja-performance-fprgaugefilter-dual-feed-fuel-system-p-267.html)
Fuel pressure gauge--------------------^^^
Wind Band-----------------------------PLX DM-6 SM-AFR | Wideband Air Fuel Gauge
Air/fuel gauge--------------------------APEXI SAFC 2 or Neo
Boost gauge---------------------------^^^^

Turbo timer Type 1---------------------Not sure about that yet HKS Turbo Timer - Type-0 & Type-1*-*Mitsubishi 3000GT*/*Dodge Stealth Parts (http://www.3sx.com/store/comersus_viewItemBundle.asp?idProduct=29206)
Oil pressure----------------------------I guess any kind



I'm trying to keep the stock look on the car so most likely I'm going with the side mounts. I'm keeping the stock ones for now but I'm changing them diffidently.

Keven If I keep the one I have I need to get rid of the Cat, maybe that all what I need to do.

Is this for a 1g or 2g car? Maybe add a bellhouse/TC brace, and also a HKS DLI ignition advancer.

DK77
06-29-2013, 03:29 AM
If you aren't running more boost than you can on pump gas, you shouldn't need an ignition amp... just make sure your stock ignition is all tuned up. A good stock ignition *may* be able to handle up to 25ish psi, but an amp would make sure you have the needed ignition power.

daerdevil_1987
06-29-2013, 03:34 AM
It's 97 as for the clutches I heard some good things about stage 4+light from 3sx one of my friend have that and he love it so I have that to think about .

DK77
06-29-2013, 12:03 PM
I've heard (and experienced) a lot of horror stories about SPEC clutches for these cars. They seem to be designed well, however they seem to have spotty quality control. More than one person has had the rivets holding the friction material to the hubs come out and ruin the clutch.

JasonY
06-29-2013, 12:44 PM
As far as clutches go, you can do a few things. Buy a new OEM disc and a ACT pressure plate and have a great smooth setup. Or for a little more grab, the RPS pressure plate. The OEM disc + RPS PP is what the street maxx clutch is fyi.

I highly recommend the RPS street max clutch.

Ignition wise, 18-19psi was the limit with a healthy gap(.032) with all brand new coils and wires. Im not a fan of gapping plugs way down to avoid blow out.

Having a 6spd w/o a bellhousing brace is financial suicide because odds are you WILL break it which will ruin the whole trans. Cheap insurance.

I would use the AEM wideband personally.

Jason

75blackray
06-30-2013, 11:53 AM
or you dual core fmic and hook it up to oem piping and you don't have to deal with surge issues. paint it black for discrete look. good for 700hp. I can recomend the kit that oohnoo on here sells.

decent smics cost alot. save your money for other mods unless you're loaded. the dsm's are old now and usually not in great condition.

just my 0.02$...

+1

My dr500s heat soaked my stock ic's after 1 gear pull at 15psi. In summer I had to run at 11-12psi or else I would get knock. With Bob's dual core I see no knock at 17psi, and blacked out its barely noticeable from the front, and the engine bay looks stock.

http://i19.photobucket.com/albums/b166/75blackray/54008e23-1600-4adc-af79-7729362e6078_zps986f6f07.jpg

http://i19.photobucket.com/albums/b166/75blackray/AustinsCard017.jpg

daerdevil_1987
06-30-2013, 10:42 PM
+1

My dr500s heat soaked my stock ic's after 1 gear pull at 15psi. In summer I had to run at 11-12psi or else I would get knock. With Bob's dual core I see no knock at 17psi, and blacked out its barely noticeable from the front, and the engine bay looks stock.

http://i19.photobucket.com/albums/b166/75blackray/54008e23-1600-4adc-af79-7729362e6078_zps986f6f07.jpg

http://i19.photobucket.com/albums/b166/75blackray/AustinsCard017.jpg

Yea I was thinking about that , I'll buy that when I buy the turbos all togther.


As for the clutch, what do you guys think of the clutch master 725 ?

DK77
07-01-2013, 06:00 AM
You really shouldn't need a twin disc clutch... Just go with the RPS Maxx Street (full face) for $630 (with TOB) from GZP RPS Max Series Clutch | Ground Zero Performance (http://www.groundzeroperformance.com/product/all-wheel-drive/rps-max-series-street-clutch)

Then if you need it, just get a Ford 1" 23 spline alignment tool from a local auto parts store for a few bucks (if you don't already have one)

That should be plenty of clutch for you and it should last for a while since it's got an OEM disc.

DK77
07-01-2013, 06:01 AM
Derpble post