TajMan
05-21-2013, 02:07 AM
Trying to figure out my new '93 Stealth R/T TT I got from Numure on 3si. Mod list from his old sig:
"K&N Intake, 3" straight exhaust, High Flow Cat, Gutted Precats, DN Downpipe, RPS Max Stage 3 Street, Greddy-RS BOV, 5Zigen FN01-RC 275/35/18 BFG G-Force Sports, Supra Fuel Pump, LC-1 Wideband, SAFCII, Autometer gauges, 1 peice Pst CFDS, AEM Fpr, Underdrive pulley, Jackhammer Cam Gears, 550cc Inj."
aem fpr and gauges etc not installed yet.
Jordan was helping me today, he hooked up his logger. Fuel trims were up near 99% and not cycling, front and rear O2 sensors doing strange things. Car just runs so strange and runs different ways at different times, mostly pig rich.
We look for the CAS to adjust timing that was off.. its not there! So its got a '94+ 2G motor?
We checked the ECU, its a '93 ECU. Car was manufactured 1st half of '92, so its not like it was a '93.5 car right?
I think first off I need to get the afpr installed and properly set fuel pressure.
Car has the boomslang harness & SAFC II.
What wiring is needed and what ECU needed to properly run a 2G motor? I feel dumb how do 2G motors adjust ignition timing again?
http://img.photobucket.com/albums/v608/TajMan/20130520_151344_zps8f8d18b8.jpg
"K&N Intake, 3" straight exhaust, High Flow Cat, Gutted Precats, DN Downpipe, RPS Max Stage 3 Street, Greddy-RS BOV, 5Zigen FN01-RC 275/35/18 BFG G-Force Sports, Supra Fuel Pump, LC-1 Wideband, SAFCII, Autometer gauges, 1 peice Pst CFDS, AEM Fpr, Underdrive pulley, Jackhammer Cam Gears, 550cc Inj."
aem fpr and gauges etc not installed yet.
Jordan was helping me today, he hooked up his logger. Fuel trims were up near 99% and not cycling, front and rear O2 sensors doing strange things. Car just runs so strange and runs different ways at different times, mostly pig rich.
We look for the CAS to adjust timing that was off.. its not there! So its got a '94+ 2G motor?
We checked the ECU, its a '93 ECU. Car was manufactured 1st half of '92, so its not like it was a '93.5 car right?
I think first off I need to get the afpr installed and properly set fuel pressure.
Car has the boomslang harness & SAFC II.
What wiring is needed and what ECU needed to properly run a 2G motor? I feel dumb how do 2G motors adjust ignition timing again?
http://img.photobucket.com/albums/v608/TajMan/20130520_151344_zps8f8d18b8.jpg