View Full Version : What interest is out there for custom parts fab?
J. Fast
05-14-2013, 12:30 PM
I'm currently working on jigs for tubular front subframes and tubular control arms. The arms will have pick up points for OEM sway bars.
I was thinking of producing a Single Turbo kit??
It can't be ridiculous s*** . It has to be an item built in production lines in minimum order quantities of 10.
Maybe a harness bar? Radiator relocate kit? Tubular crash bars? Throw some ideas at me guys.
green-lantern
05-14-2013, 12:44 PM
Radiator relocate kit might be a cool one and as far as I know nobody is making crashbars now. I thought about doing it myself.
I tell you what though, I miss my Cianci 3 point strut bar. It wouldn't fit with my IC pipes so I got rid of it. I'd like to see one like pit road but not an arm and a leg. Some people claim strut bars don't do anything but when I got rid of mine I almost sold the IC pipes and put it back on. Maybe the 20 buck ebay ones don't do much but that 3 point sure as hell did.
familyMAN
05-14-2013, 01:56 PM
Short runner intake, tuned for 5-8k rpms. Not ridiculously priced.
Tubular subframes could be interesting.
Greg E
05-14-2013, 02:25 PM
Side mount innercoolers.
J. Fast
05-14-2013, 02:37 PM
Short runner intake, tuned for 5-8k rpms. Not ridiculously priced.
Tubular subframes could be interesting.
Like this one?
https://photos-b.xx.fbcdn.net/hphotos-ash3/s720x720/561893_352746538179857_1930778096_n.jpg
FeaRpb
05-14-2013, 02:40 PM
I like your subframe idea.
I have been wanting remote iac blocks, solid bushings for various parts, lighter weight custom brackets, a nice functional front splitter/diffusor.
familyMAN
05-14-2013, 02:46 PM
Like this one?
https://photos-b.xx.fbcdn.net/hphotos-ash3/s720x720/561893_352746538179857_1930778096_n.jpg
Yes please. What is the rpm range it's tuned for? I'm sure you have plenty of math done on it;) Does it use stock lower mani and fuel rails? Passenger side opening would be better for me (and most) so I don't have to completely redo my FMIC piping. Would need to figure out where to put filler neck though...
PM me if you want.
sergechronos
05-14-2013, 02:51 PM
Radiator relocate kit might be a cool one and as far as I know nobody is making crashbars now. I thought about doing it myself.
I tell you what though, I miss my Cianci 3 point strut bar. It wouldn't fit with my IC pipes so I got rid of it. I'd like to see one like pit road but not an arm and a leg. Some people claim strut bars don't do anything but when I got rid of mine I almost sold the IC pipes and put it back on. Maybe the 20 buck ebay ones don't do much but that 3 point sure as hell did.
:smartie: Tubular front subframes and control arms would rock, but I think that tubular crash bars (or at least the front) and a nice 3 point strut bar that fits around IC piping would be more likely to sell and bring in money to fund further ventures. I'd love to see a tubular with some brackets for mounting a front mount IC or OC off of.
Wouldn't mind some kind of ready made kit to tilt at least the radiator forward a bit. I figure that with a bit of ducting leading to a wide vent in the front of the hood would be a good way to help keep temps low and maybe allow for fans that move more CFM, plus radiator and such won't matter much if it gets wet from rain.
Unlogic
05-14-2013, 04:04 PM
Tubular front subframes and tubular control arms would be great.
R/T93
05-14-2013, 05:16 PM
Rear brake air deflectors..... like the front MR ones.
From the phone.
fastfalcon94
05-14-2013, 09:00 PM
I would really like to see poly differential and poly subframe bushings. Every other platform seems to have 2-3 vendors that make different brands, but 3s get none:/
green-lantern
05-14-2013, 09:17 PM
Rear brake air deflectors..... like the front MR ones.
From the phone.
I've been looking at using the rear fake brake vents as actual brake vents. I'm just not sure if it's worth it yet. Do you know what temps you have got the rears to on track days?
GTOJOE
05-14-2013, 10:07 PM
2nd gen onwards for the GTO actually has functioning vents. They don't point anywhere but all you would need is a hose looping around to the brakes.
R/T93
05-14-2013, 11:00 PM
I've been looking at using the rear fake brake vents as actual brake vents. I'm just not sure if it's worth it yet. Do you know what temps you have got the rears to on track days?
They get hotter than my fronts. At least after coming into the pits they are up to 250 deg F hotter than the fronts.
Erron Spalsbury
05-15-2013, 11:23 AM
They get hotter than my fronts. At least after coming into the pits they are up to 250 deg F hotter than the fronts.
That's really unusual. Do you have front vents and are doing a cool down lap? Or, what COE pads do you have front and rear, because that is not the way it should be.
green-lantern
05-15-2013, 11:38 AM
2nd gen onwards for the GTO actually has functioning vents. They don't point anywhere but all you would need is a hose looping around to the brakes.
yeah but the holes are very small. I would like to open them up all the way and use the old plastic parts as plugs for DDing.
I've tried to find tubes that are flat for the wheel wells like this.
http://lgmotorsports.com/gallery/albums/userpics/10001/Brake%20Ducts%20Complete.jpg
but haven't had a lot of luck yet. Might make them out of sheet metal or something.
green-lantern
05-15-2013, 11:38 AM
That's really unusual. Do you have front vents and are doing a cool down lap? Or, what COE pads do you have front and rear, because that is not the way it should be.
He has the XYZ BBK in front so that could be why.
Stealth_RT
05-15-2013, 11:39 AM
In for tubular subframes, front and rear, tubular control arms, radiator relocating kit, three point strut tower that'll clear my IC pipes, suspension and rear diff bushings all around that don't cost a fortune, and a front CF splitter for a 1G STEALTH FFS!!!!
R/T93
05-15-2013, 12:54 PM
That's really unusual. Do you have front vents and are doing a cool down lap? Or, what COE pads do you have front and rear, because that is not the way it should be.
Its because my fronts are 14" with cooling deflectors. Rears are stock with no cooling. Carbotech ax6 in rear. Stock XYZ pads up front, similar to ax6.
Yes cool down lap.
From the phone.
Erron Spalsbury
05-15-2013, 01:51 PM
Its because my fronts are 14" with cooling deflectors. Rears are stock with no cooling. Carbotech ax6 in rear. Stock XYZ pads up front, similar to ax6.
Yes cool down lap.
From the phone.
That makes perfect sense. The higher COE on the rear can do that. Get some good pads up front and it'll flip flop the other way. :)
Jer, a one piece transmission hard mount. Mine is a two piece and I've often though how much room and simplicity could be saved on that one mount. (and weight for that matter)
R/T93
05-15-2013, 03:08 PM
That makes perfect sense. The higher COE on the rear can do that. Get some good pads up front and it'll flip flop the other way. :)
Jer, a one piece transmission hard mount. Mine is a two piece and I've often though how much room and simplicity could be saved on that one mount. (and weight for that matter)
Doubtful. AbM has xp12 up front and same thing.
Larger cooled rotors vs smaller non cooled. What one retains heat more?
I'm hardly pushing them though, 300 awhp and holding to 115 mph on the straights makes them last.
From the phone.
anyonebutme
05-15-2013, 03:14 PM
That makes perfect sense. The higher COE on the rear can do that. Get some good pads up front and it'll flip flop the other way. :)
I have XP8s all around (not enough pad, need to bump it up past XP12 I used to have), still hotter in the rear. Rear gets like 0 airflow compared to the front. Same goes for Dan, who has XP20s in front and I dunno what in rear (XP10/12?), stoptech 14" front kit. I'm sure front peak temps are a lot hotter, but fronts cool a lot faster between corners.
sergechronos
05-15-2013, 04:18 PM
That makes perfect sense. The higher COE on the rear can do that. Get some good pads up front and it'll flip flop the other way. :)
Jer, a one piece transmission hard mount. Mine is a two piece and I've often though how much room and simplicity could be saved on that one mount. (and weight for that matter)
Honestly wouldn't mind seeing some new mounting stuff like for the front motor mount bracket, something a bit smaller with better clearance for turbos on the front side. Similar to what Dave did with the replacement trans mount bracket on the other forum. The driver side mount could probably be incorporated with the alternator bracket and both replaced with the right alloy or a stainless steel of some kind for a bit of weight savings. At the very least, a front motor mount bracket that is smaller and has better clearance than stock would be a big hit I think for folks running bigger turbos and aftermarket manifolds that need clearance.
FeaRpb
05-15-2013, 04:40 PM
I want some weight loss parts and undercarriage aero.
FeaRpb
05-16-2013, 12:20 AM
Also maybe a custom Catch Can setup and also maybe a Custom Coolant Over Flow tank to replace the OEM plastic one.
Custom dash trim stuff like Weevil used to make. 4'' downpipe w/ v-band rear and 90* turn down ;)
Maybe make your own vacuum blocks if they price is right.
Hard AttacK
05-16-2013, 02:30 AM
Short runner intake for sure and honestly tubular subframes would sell like hot cakes.
Short runner intake for sure and honestly tubular subframes would sell like hot cakes.
how much of a weightsave would that get you?
replacing the whole subframe with tubular
HLxDrummer
05-16-2013, 09:01 AM
Crash bars I think would be a good seller. Tubular subframe/arms would be cool but I don't know if you would sell a lot of them. I really like the rad idea but how many people without a vent in their hood would buy them? Poly bushing would be awesome!! Functional splitter would be a good seller I think.
Greg E
05-16-2013, 09:54 AM
Plug and play COP setup.
familyMAN
05-16-2013, 01:13 PM
....crickets....
J. Fast
05-16-2013, 04:58 PM
Sorry I just fell off guys. I was commissioned last minute by Matt Young Racing to prepare a couple of cars for The Pirelli World Challenge Circuit. I've been working my ass of the last few days trying to wrap up the builds.
I'm liking the feedback and the ideas being pitched here. There's defnitely some good ideas.. Suddenly, I have a full plate. I will circle back around and stealth mode this thread to see what interest is out there.
I took a few min's to scrutinize the rear brake deflector ideas. The rear brakes have a full faced dust shield that would need to either be removed (to accomodate a vane deflector) or modified or replaced to accept a shroud or brake ducting flange. Please discuss what an economical fix for that might look like in addition to where you might mount a vane deflector.
One very simple alternative which addresses the thermal indifference between the front/rear brakes is switching to a different brake bias via changing the master cylinder or implementing a bias knob to redistribute some of the clamping forward to those huge front rotors.
Sounds like we might have one run of tubular suspension components and a few misc engine brackets. I love the COP idea and the synthetic bushing ideas but want to stay clear of electronics and synthetic materials.
Keep it coming guys. I have to see numbers to justify making atleast 1 run on this stuff.
I'm busy for a min... Only answering and handling my For Sale stuff till I clear my plates. Cheers
familyMAN
05-16-2013, 05:10 PM
Intake mani......;)
sergechronos
05-16-2013, 05:46 PM
I took a few min's to scrutinize the rear brake deflector ideas. The rear brakes have a full faced dust shield that would need to either be removed (to accomodate a vane deflector) or modified or replaced to accept a shroud or brake ducting flange. Please discuss what an economical fix for that might look like in addition to where you might mount a vane deflector.
Hmm..Intriguing problem. I would assume that you could use something similar to a hole saw to cut an opening in the shield, then drill some holes and use pop rivets (if you don't have access to a welder) to attach the shroud for cheap and dirty cooling from a hose via side skirt vents, although I'm not sure how much more effective it would be. Certainly moreso than stock but doubt it'd make a huge difference. Just not sure what kind of gains you would get for a full engineering replacement piece with a built in shroud or how many you would sell. This would be the sort of thing I would tackle after establishing some other product with guaranteed revenue honestly.
Sounds like we might have one run of tubular suspension components and a few misc engine brackets. I love the COP idea and the synthetic bushing ideas but want to stay clear of electronics and synthetic materials.
Keep it coming guys. I have to see numbers to justify making atleast 1 run on this stuff.
I'm busy for a min... Only answering and handling my For Sale stuff till I clear my plates. Cheers
Bushings aren't terribly difficult to make, just time consuming and require some particular tools. Drill press and an oven are generally mandatory, lot of compounds require a vacuum chamber sort of thing for degassing purposes. COP would require a lot more knowledge and information from those running them, possibly additional tuning functions in Chrome. Haven't looked into it much, there was someone on the other forum that was working on it last year but don't remember where that ended up. So long as it could be tuned via Flash, the real thing would just be pieces to use to mount the coils in place of the spark plug cover. Could deliver a better spark than stock, close to on par with a DLI (or maybe better). Would require the knowledge of other folks who have more experience with it and be more of a community effort I think. Still, if you could do it for 200-300 bucks that'd still be a cost savings over a spark booster.
Tubular suspension and crash bars are probably your best bet for a first run of products. A full length underbody diffuser would be great, but would be a bear to ship unless you made several smaller panels that all bolted together. Would probably still be a decent enough improvement, but I have to imagine costs would be prohibitive for sales.
I think you mentioned harness bars, that'd be a nice addition. What about something like a roll bar for the Spyders? Something similar to Mustang and Camaro verts, perhaps with mounts for speakers and an overhead light option? Not entirely sure what all the Spyder has for those sorts of options. Could be combined with someone good with fabrics or something to make a wind screen behind the front seats?
Feel free to just paypal me the royalty fees from all these winning ideas :biggrin:
In all seriousness though I think some kind of underbody piece at least for the engine bay and down the exhaust path would work well, especially if it's capable of protecting the oil pan pick up area. Less stuff that the air can hit the better. And wouldn't hurt to be able to protect the oil pan pick up area better.
Erron Spalsbury
05-16-2013, 06:30 PM
Sorry I just fell off guys. I was commissioned last minute by Matt Young Racing to prepare a couple of cars for The Pirelli World Challenge Circuit. I've been working my ass of the last few days trying to wrap up the builds.
The Mazdas?
anyonebutme
05-16-2013, 08:11 PM
Most people who'd buy the deflector have already removed the dust shields front and rear.
futurevr4man
05-16-2013, 08:23 PM
i have to say that i think a manifold and/or a throttle body that is AFFORDABLE as well as effective would be the biggest thing that would sell in my mind
mehrshadvr4
05-18-2013, 06:15 AM
I really want a tube light weight subframe and control arms for the front. I would love to remove weight from the front.
Hard AttacK
05-20-2013, 08:44 PM
How do you get into the work you do?
Lou i'm assuming you think they wouldnt sell due to price...which you're probably right. :p
HLxDrummer
05-21-2013, 10:33 PM
How do you get into the work you do?
Lou i'm assuming you think they wouldnt sell due to price...which you're probably right. :p
Ya, seems like one of those big awesome projects that someone pitches where everyone says they'll pay $2,000 for sure then magically disappear when it is time to show the cash.
A complete subframe bushing set in poly.
Think it would sell like butter with a reasonable price.
I know I would buy it for future subframe restauration.
sergechronos
05-22-2013, 05:52 PM
A complete subframe bushing set in poly.
Think it would sell like butter with a reasonable price.
I know I would buy it for future subframe restauration.
He already said no to the bushings but just for curiosity, what would be considered a reasonable price? Think somebody had some aluminum ones made up before and ended up sitting on them for a while.
Blackmount
05-22-2013, 08:01 PM
Like this one?
https://photos-b.xx.fbcdn.net/hphotos-ash3/s720x720/561893_352746538179857_1930778096_n.jpg
Im in for one of these too. As well as everything in your OP. A very cheap Single turbo kit could be made that utilizies stock n/a manifolds and mounts the turbo infront of the engine/trans
Streamln1
10-27-2013, 12:37 PM
that's not gonna clear a hood.
J. Fast
10-27-2013, 12:54 PM
I will be producing some huge sidemounts. I just finished a jig. They will be larger than a Greddy or CX racing front mount and will accept stock intercooler piping. They're for the stock bolt on turbo fanatics. Should be good for 900 horsepower. They will have a shroud option and will be the largest ever made.
sergechronos
10-27-2013, 01:50 PM
Personally still interested in the possibility for tubular front control arms. Seems the factory ones are hit or miss when it comes to pressing in new ball joints. Something tubular that is lighter and less likely to be wobbly and weak there would be fantastic if the price were right. Somewhere around the $150-$200 mark would sell well, and of course so long as it maintains the factory mounting points the rest of the subframe in tubular could be easily upgraded later.
A smaller, somewhat offset front motor mount for better clearance would probably go over well at around the $50-$80 price point.
The 3 point strut bar that clears FMIC seems like it'd be a hit pending price.
Tubular front crash bars always sell well and seems nobody is making them anymore.
While I like the idea of big ass SMIC, just depends on the cost honestly. If it costs more than a dual core FMIC, it's unlikely to sell in large quantities.
wingnut
10-27-2013, 03:00 PM
I will be producing some huge sidemounts. I just finished a jig. They will be larger than a Greddy or CX racing front mount and will accept stock intercooler piping. They're for the stock bolt on turbo fanatics. Should be good for 900 horsepower. They will have a shroud option and will be the largest ever made.
Subscribed...dont really need 900hp worth, but a decent upgrade would be awesome :D
HLxDrummer
10-27-2013, 08:12 PM
Ya I would think crash bars, front tower bars, and SMICs would sell well depending on price.
What are you thinking price wise on the SMICs? Are they gunna be hanging under the car and bulging out the bumper cover like Gene's? I think a reasonably sized set for a reasonable price would sell the most. Kind of like a easier/better DSM SMIC alternative. Didn't seem like many people bought Gene's but they were expensive.
wingnut
10-27-2013, 08:43 PM
I think a reasonably sized set for a reasonable price would sell the most. Kind of like a easier/better DSM SMIC alternative. Didn't seem like many people bought Gene's but they were expensive.
Ditto...times eleventy!
Ya I would think crash bars, front tower bars, and SMICs would sell well depending on price.
What are you thinking price wise on the SMICs? Are they gunna be hanging under the car and bulging out the bumper cover like Gene's? I think a reasonably sized set for a reasonable price would sell the most. Kind of like a easier/better DSM SMIC alternative. Didn't seem like many people bought Gene's but they were expensive.
yes this would probably be "better" as far as being able to sell anyways...
smaller cores and cheaper. ~600 hp cores would be more than enough for most. as most seem to go with td04 upgrades anyways. dejons where pretty good. but expensive.
besides having too large cores with too small turbos is not good either. an intercooler should be adapted to your hp aswell. and very few people are doing 700+ hp.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.