PDA

View Full Version : Cruise Control Electrical Resistances



Patryn
09-30-2010, 07:29 PM
Can someone confirm what the resistors I'll need to rewire the cruise control for a 1998 3000GT VR4? I searched around and saw that a 1991 3000GT VR4 was 820 and 2700. Will make my trip cross country a little easier if I can get the cruise control back online.

OhioSpyderman
09-30-2010, 08:35 PM
Has the cruise control changed at all since 91?

If not, I'm not sure about your question...the MAJOR source of cruise control issues (I experienced it in the Stealth) is that the vacuum line to it gets VERY HOT and severs... < $5 later it works....

Bob. :)

Patryn
09-30-2010, 11:59 PM
Aftermarket steering wheel and trying to retain the cruise control. Figure the easiest way is to just build a new switch I can mount somewhere. Just need to figure out the resistences so I can get the correct resistors and hopefully get it working like stock. Unless anyone has any creative ways they reused the stock switch.