View Full Version : Bad Ptu ??
rob corsa
05-09-2013, 02:13 AM
had a question my 95 dodge stealth rt dohc na will not start. im getting fuel but no spark on 3 and 6.It will crank but not start i have checked the coils, wires, plugs and they are all good also tested the ptu but, not sure if im doing the test right. i read somewhere that the test will not show if 1 driver is bad and theres noway to test for that,you guys think this is the reason it wont start and any help would be great thanks
Chris@Rvengeperformance
05-09-2013, 10:53 AM
FYI these engines will start just fine on as few as 3 cylinders. maybe 2
rob corsa
05-10-2013, 04:26 PM
ya just got a new ptu and still wont start or fire on 3 and 6 any ideas guys.
\
Chris@Rvengeperformance
05-10-2013, 05:10 PM
Did you verify the cam timing?
rob corsa
05-10-2013, 08:14 PM
Did you verify the cam timing?
I dont know how to do that. I ended up getting it towed to my mechinc
speedy25
06-27-2013, 10:04 PM
also tested the ptu but, not sure if im doing the test right.
The test as described in the manual is correct and will ID a bad PTU. All it does is switch electricity on and off. Sorry you had to spend an extra $100 to find out it really was good.
Improper cam timing throws the crank and cam sensors out of phase and causes the 3-6 to drop out. 1st gen cars also had ECU capacitor problems that caused the same problem.
I hope your mechanic does well and you get back a running car and only an almost empty wallet. :)
-SP
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.