View Full Version : And so it begins.... Overual and AEM.... I wanna DRIVE!
SUTHNR
04-23-2013, 09:40 AM
Last time my car went to NG was... hell I can't remember... And I think it's got about 100 miles since then. Put nice new super-sticky rubber on last year and never got to even break them in cuz the engine was just not really healthy... Too much abuse :DevilSmile: I had swapped in new bearings, no fix. Thought it was a collapsed lifter or missing shim. Lifters were all fine and found nothing there either. :-/ So the time has come to simply pull it out, break it down and see what was REALLY causing the noise (knocking on decel, smooth as butter on accel and cruising), and start from scratch putting it back together.
Also have some ideas on improving things. One is to switch over to the AEM EMS for better tuning options. Already have a Series 1 to go in. Other is going back to 93 off of E85. Main reason for that is to get my range of travel back. E85 doesn't seem to be catching on like the wildfire people thought a few years ago, and there's still really only ONE place in Charlotte that reliable has it - lucky for me it's 2 miles from my house. But I can't even make a day-trip to the mountains because I wouldn't have any gas to get home! BUT with the AEM, it's easy enough to set up a 93 tune and a E85 tune (if it''ll make any performance difference on an NA!).
Staying NA (for now) to see if there is more there... I have turbo ideas but we have decided that may be for next year...
EricB
Greg E
04-23-2013, 09:43 AM
No interest in a flash ECU?
Memphetic
04-23-2013, 10:14 AM
AEM is the tits.
J. Fast
04-23-2013, 10:19 AM
V2 has flex fuel integration now. I think Greg E is working on a Chrome patch for that also. Best of luck!
SUTHNR
04-23-2013, 10:43 AM
Hey Greg,
Daniel is going to be calling you about them, and we are definitely interested in them - carrying and tuning with them. I'm not particularly locked in one one tuner or another, I just wound up with a pretty sweet deal on a Series 1. Currently have the GMMAF and Translator in there, but John suggested something with better tuning control since I am going back to 93 and have a very high compressions engine with cams and such.
But we are definitely interested in finding out more about the Chrome ECU options for our tuning and worldwide customer base :)
EricB
Greg E
04-23-2013, 10:54 AM
Sounds good Eric! Adam and Brett are the guy selling hardware and its best to get ahold of them for selling their products. I just do code & tuning. Id be happy to train your crew on how to utilize the flash ECU to its fullest!
With all the new tuning options out there, I bet AEM series 1s are going for next to nothing!
familyMAN
04-23-2013, 06:05 PM
With all the new tuning options out there, I bet AEM series 1s are going for next to nothing!
I feel like I have a dinosaur in my car with the series 1, now that there is series 2, infinity, chrome now available...true flex fuel (auto-mod: fueling, timing and boost) would be nice for road trips.
Blackmount
04-23-2013, 06:10 PM
my interest has been spiked... subbed
you need snails already. :p
SUTHNR
04-23-2013, 06:50 PM
you need snails already. :p
haha! THAT's not been entirely ruled out.. for the future. Right now we're gonna rebuild it NA. I have ideas working for the next stage after getting it back on the road...
EricB
Blackmount
04-23-2013, 07:13 PM
4.0L and mivec SOHC heads + high compression.
Chris@Rvengeperformance
04-23-2013, 08:21 PM
If you are going to run that high compression again, maybe consider meth injection?
SUTHNR
04-24-2013, 10:53 AM
I'd do a meth kit or "dump a half gallon of methmix in the tank each fillup" before sticking with E85. I really want the range back so I can travel and actually enjoy the car more than commuting back and forth to work.... If we end up on the AEM, I may have a e85 tune available for track days when I know I'm gonna be pushing it long and hard. (that's what she said!)
EricB
green-lantern
04-24-2013, 12:59 PM
(knocking on decel, smooth as butter on accel and cruising),
EricB
That almost sounds like trans problem. Last time I drove my car I started hearing a noise on decel. It wouldn't do it on accel or cruising, just when I let off the gas. It sounds sort of like getrag rattle or scrapping noise. I haven't been able to trouble shoot yet.
Does your car do it when it idles or just on decel?
SUTHNR
04-24-2013, 01:19 PM
It's there at idle and decel. Not there when accelerating or cruising with foot on gas, but slightly lift and it makes the noise. I never suspected the trans because of its prevalence... And I know it's not getrag rattle as it's got a FWD mitsu trans in it ;)
EricB
green-lantern
04-24-2013, 02:30 PM
Well my getrag does make noise at idle but the noise I hear on decel is different, sort of sounds like it but different. Anyway I'm curious what you find out. I hope to trouble shoot mine next weekend.
SUTHNR
04-24-2013, 03:25 PM
Once they get inside, I'll let you know what we find. I'm curious myself. Drove it in with great oil pressure and all, just a noisy engine... and PITA to drive when engine is cold - had to let it warm up a bit, but that was supposedly due to the E85 characteristics...
EricB
SUTHNR
04-26-2013, 01:40 PM
New discovery as to what was going on....
http://www.suthnr.com/garage/rebuild2013/stealth-rebuild-2013-002-2000.jpg
http://www.suthnr.com/garage/rebuild2013/stealth-rebuild-2013-007-ad-2000.jpg
http://www.suthnr.com/garage/rebuild2013/stealth-rebuild-2013-010-ad-2000.jpg
http://www.suthnr.com/garage/rebuild2013/stealth-rebuild-2013-019-ad-2000.jpg
So the last time it was built, it was done with stock rods and the 3SX 92mm Ross pistons. The pins were press-fit onto the rods and the pistons were float. Well, the #2 pin managed to walk its way to one side and groove out the cylinder wall and eventually stressed enough to pop the piston itself around the pin boss, leaving 2 chunks in the pan and obvious metal flake flowed throughout and had started to wash out bearings.
SO the pursuit is on for what to do next.....
EricB
green-lantern
04-26-2013, 03:25 PM
Daym!!!
A light hone should take care of that. lol
SUTHNR
04-26-2013, 03:40 PM
Yeah, we were thinking fill it in with some JBWeld and smooth out the bore and put it all back together...
green-lantern
04-26-2013, 04:03 PM
Don't forget to super glue that piston.
Greg E
04-26-2013, 04:07 PM
Yeah, we were thinking fill it in with some JBWeld and smooth out the bore and put it all back together...
Not sure if srs....
green-lantern
04-26-2013, 04:10 PM
Not sure if srs....
Trick of the trade
95gto
04-26-2013, 04:19 PM
3.5L NA build :w00t:
anyonebutme
04-26-2013, 04:43 PM
Not sure if srs....
Pretty standard way that we get tighter bore clearances in jet pumps, LMAO.
Chris@Rvengeperformance
04-26-2013, 06:21 PM
hmm, did they not use the pin locks?
Blackmount
04-26-2013, 06:25 PM
Option 1: Allout n/a build
Option 2: Turbo(s)
Option 3: stock
SUTHNR
04-26-2013, 06:59 PM
hmm, did they not use the pin locks?
No. That was my first question too. The pins were press-fit into the stock rods and pistons left to float, rather than full-float the rods and use locks. I didn't know that when the bottom end was built nearly 10 years ago now. Apparently #2 slowly decided it didn't want to stay put.
EricB
green-lantern
04-26-2013, 10:02 PM
No. That was my first question too. The pins were press-fit into the stock rods and pistons left to float, rather than full-float the rods and use locks. I didn't know that when the bottom end was built nearly 10 years ago now. Apparently #2 slowly decided it didn't want to stay put.
EricB
So what are the ideas from here?
J. Fast
04-27-2013, 01:21 AM
Whats the crankwalk mic out to? Is the break from inadequate oiling?
xwire
04-27-2013, 01:29 AM
have to agree with Levi, 3.5 if your replacing the block might as well gain the displacement and low end torque
stealthee
04-28-2013, 01:07 PM
I think you found the problem.
SUTHNR
07-11-2013, 04:30 PM
The next step finally is coming soon!
New innards heading to the machine shop for prepping.
Again moving into uncharted territory on the 3S platform.... :w00t:
http://www.3sx.com/store/cars-3sx/eric-stealth-rebuild-2013-pistons-new-01.jpg
http://www.3sx.com/store/cars-3sx/eric-stealth-rebuild-2013-pistons-new-02.jpg
Big ole' flat-tops!
EricB
TUFFTR
07-15-2013, 06:05 AM
Will they be available for purchase off the shelf possibly?
SUTHNR
07-16-2013, 09:46 AM
That is the goal :)
2fnloud
07-16-2013, 10:01 AM
Do they allow valve clearance?
green-lantern
07-16-2013, 10:35 AM
No, they are built to hit the valves :p
2fnloud
07-16-2013, 01:24 PM
Last I knew valve clearing pistons had not been made. That is why I asked, I knew Ray mentioned something about them, but never seen that any had been designed.
green-lantern
07-16-2013, 02:32 PM
Last I knew valve clearing pistons had not been made. That is why I asked, I knew Ray mentioned something about them, but never seen that any had been designed.
I'm just busting your balls Steve :p
I do wonder about the 3SX being inscribed on the top might cause a bit of detonation. I’ve been told anyway that any scratches, dents or just crap built up on the piston can cause it. I assume that's not enough to worry about though.
TUFFTR
07-17-2013, 05:27 AM
In an NA you would probably have less chance of that being concern. 13:1 pistons have been around on the 3000Gt NA platform for years!
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.