PDA

View Full Version : Customer has car towed in spraying E85 everywhere



Ninja Performance
04-14-2013, 11:34 PM
Courtney's fuel issue, the entire line is full of holes. It is pissing fuel out thru the AN hoses everywhere. Looks like ethanol incompatible and or cheap hose was used.
Customer had car towed to me because of this issue.

I replaced this one line with a temp new braided line and pressurized the system only to find all the rest of the dual feed lines all spraying thru the lines. The inner hose in the lines are all deteriorated. Everything s leaking like a sieve No Bueno.

I will make all new lines using the Russel black braided nylon I use and black fittings, it will look mean! Like Ninja LOL, and won't leak anymore. Will replace all lines, from tank to rails to fpr and back as it is a dual pump dual feed setup.

Only thing I can think is the SS braided lines are not a high quality brand (china) or not ethanol safe.

https://sphotos-a.xx.fbcdn.net/hphotos-ash3/552598_553926887963496_1188623493_n.jpg



https://www.facebook.com/photo.php?v=553928627963322&l=7320893939278715086

-Chris

Ninja Performance
04-14-2013, 11:37 PM
Never seen AN lines just Gush like this. It is as if there was the SS braid on the outside, and nothing left on the inside. The line in the vid was the worse so after I replaced that one with a temp I made real quick, the holes in all the others appeared.

-Chris

futurevr4man
04-14-2013, 11:44 PM
good grief, what a mess!

Ange
04-14-2013, 11:44 PM
that's why I will use teflone lines.

vr4tune
04-14-2013, 11:45 PM
That's a shower!

IPD
04-14-2013, 11:46 PM
must not have been ptfe

MR2
04-14-2013, 11:47 PM
And where did the lines come from...

futurevr4man
04-14-2013, 11:52 PM
and where did the lines come from...

australia

Ninja Performance
04-15-2013, 01:41 AM
Don't know the brand or where the hose was manufactured.

I have had Earls on my car for probably 7 years, 2-3 which had E95M5 and no issues whatsoever. These lines are newer and are trashed.

The Russel I use now is Ethanol safe and have no problems using it for customer's cars. But yeah, PTFE if you really want 100% no questions asked.

-Chris

Alan92RTTT
04-15-2013, 02:53 AM
can't figure how to embed FB vid, worked fine on 3si...

3SI allows raw HTML to be posted. That is a huge security rick and I'm amazed it has not caused a problem there yet.

I will research ways to get the facebook videos to work here.

Alan92RTTT
04-15-2013, 03:07 AM
https://www.facebook.com/photo.php?v=553928627963322&l=7320893939278715086

Made it work

Street_Chally73
04-15-2013, 03:31 AM
That's insane!!! It looks like yet another car is getting the full-on Ninja Performance difference done to it...Keep up the great work, Chris!!


Sent from the garage

Ninja Performance
04-15-2013, 09:58 AM
https://www.facebook.com/photo.php?v=553928627963322&l=7320893939278715086

Made it work

Awesome, thanks Alan!

-Chris

Chris@Rvengeperformance
04-15-2013, 10:50 AM
wow, what is amazing is they won't even take responsibility for it. typical

J-Groove
04-15-2013, 11:15 AM
Wow!! That is crazy!

-John

green-lantern
04-15-2013, 11:27 AM
I always carry a fire extinguisher since I started moding the fuel system. It would be a shame for a nice car like that to go up in flames.

Somebody asked me why I carried one the other day. Insurance on a very large investment lol.

Chris@Rvengeperformance
04-15-2013, 11:34 AM
reminds me I am going to have to replace the line from my bulkhead to the stock steel line. Has to be 5 years old.

BigTyla
04-15-2013, 01:06 PM
A great reminder that one should not skimp on something as simple as AN braided hose.

Chris@Rvengeperformance
04-15-2013, 01:11 PM
I did just check and see the summit hose I used claims to be e85 compatible.

DuTTch
04-15-2013, 01:15 PM
I always carry a fire extinguisher since I started moding the fuel system. It would be a shame for a nice car like that to go up in flames.

Somebody asked me why I carried one the other day. Insurance on a very large investment lol.

E85 doesnt burn lol, we tried to light the grill with it once at NG, would not light up at all.

DuTTch
04-15-2013, 01:15 PM
I always carry a fire extinguisher since I started moding the fuel system. It would be a shame for a nice car like that to go up in flames.

Somebody asked me why I carried one the other day. Insurance on a very large investment lol.

E85 doesnt burn lol, we tried to light the grill with it once at NG, would not light up at all.

DuTTch
04-15-2013, 01:16 PM
reminds me I am going to have to replace the line from my bulkhead to the stock steel line. Has to be 5 years old.

I am in the same boat

Ninja Performance
04-15-2013, 04:41 PM
I am in the same boat

Boat? What boat? can we go fishing?

We use Russel pro classic and it is E safe.

I am doing it in all black braided nylon with black on black fittings. It will look mean. Except under car gets braided stainless steel for abrasion resistance.

I have 7 yr old lines in my car, been running ethanol/methanol for 3 of those years and at 36psi of boost and 4 pumps my lines see high pressure. Not one drop. All I can guess is these lines are either cheap china hose or just some generic that is not E safe.

We are getting it all squared away, will even do some tuning to see what if there is any more power to be had.

-Chris

SteveVR4
04-15-2013, 09:39 PM
I love when a competing company makes a post knowing it will make our company look bad whether warranted or not. Heaven knows we have observed untruths and corrected issues on others products/ service but we don't try to build our business by trying to hurt theirs.

Courtney has been and we consider him to be a customer and a friend who has dealt with us a long time and hate his being upset with us.

There were several issues with getting Courtney's line fixed (which was not a new line BTW). We had done many things to try help him on this issue even though it was not under warranty since he has been such a good customer including getting a local mechanic to his house, offering to tow his car to a local shop, and John our shop foreman had even offered to drive out to Courtney's to repair it himself, but he didn't get any response from Courtney.As a matter of fact we believed Courtney had gotten it repaired on his own because we never heard back from him- sorry if we dropped the ball on that Courtney.

When get in tomorrow will re-familiarize on the time frames on when the different things were installed on the car. but I believe the fuel kit was installed several years prior probably when Chris (Ninja) worked at the shop and back before everyone started running E85, but until I have facts I don't want to speculate too much.

Also, originally our dual feed kits were built to the design and using parts supplied by our purchase of IPO (which was Chris's company before he sold it and its product lines out to us and as far as I'm aware were not Chinese parts). Over the past couple years we have made numerous improvements to the kits including using lines made of different materials as ethanol has become more prevalent.

Once again our apologies to Courtney on behalf of myself and the company.

Steve

Ninja Performance
04-16-2013, 12:24 AM
Everyone going cray talking teflon/PTFE don't need to go that far unless you really have the money to spend on that.

I would trust the Russel Pro Classic as MANY have been using it for years with no issues on Ethanol, meaning muscle cars and such, Lots of info on lines and ethanol on Yellow Bullet forums. And Pro Classic is what I am redoing all of Courtney's lines in.

-Chris

vr4tune
04-16-2013, 01:10 AM
I love when a competing company makes a post knowing it will make our company look bad whether warranted or not. Heaven knows we have observed untruths and corrected issues on others products/ service but we don't try to build our business by trying to hurt theirs.

Courtney has been and we consider him to be a customer and a friend who has dealt with us a long time and hate his being upset with us.

There were several issues with getting Courtney's line fixed (which was not a new line BTW). We had done many things to try help him on this issue even though it was not under warranty since he has been such a good customer including getting a local mechanic to his house, offering to tow his car to a local shop, and John our shop foreman had even offered to drive out to Courtney's to repair it himself, but he didn't get any response from Courtney.As a matter of fact we believed Courtney had gotten it repaired on his own because we never heard back from him- sorry if we dropped the ball on that Courtney.

When get in tomorrow will re-familiarize on the time frames on when the different things were installed on the car. but I believe the fuel kit was installed several years prior probably when Chris (Ninja) worked at the shop and back before everyone started running E85, but until I have facts I don't want to speculate too much.

Also, originally our dual feed kits were built to the design and using parts supplied by our purchase of IPO (which was Chris's company before he sold it and its product lines out to us and as far as I'm aware were not Chinese parts). Over the past couple years we have made numerous improvements to the kits including using lines made of different materials as ethanol has become more prevalent.

Once again our apologies to Courtney on behalf of myself and the company.

Steve


Am I missing something? I don't recall Chris trying to bash you or your shop. In fact I had not even thought that 3sx was involved till this post.

ICPREY
04-16-2013, 01:22 AM
He is referring to the 3si post where the owner posted up. The Aeroquip PTFE is pretty affordable, when comparing it to other hoses that may or may not degrade with time.

vr4tune
04-16-2013, 01:43 AM
Oh I don't go there often unless I'm bored.

i3igpete
04-16-2013, 09:49 AM
doesn't alcohol burn clear though?

Ninja Performance
04-16-2013, 10:24 AM
doesn't alcohol burn clear though?

That's the scary part.

-Chris

Greg E
04-16-2013, 10:25 AM
doesn't alcohol burn clear though?

Its not easily visible in the day light. Its even hard to see at night.

Ninja Performance
04-16-2013, 10:39 AM
Not getting into drama at this point in my life, but must address inference that this thread was done with malice.

I mainly posted this up because the issue of ethanol and non ethanol safe lines, to show what can happen. Never stated who did it, where it had been, what products were in it.

I have always loved to make threads to spread information to others. Some of my many many threads are just that. And that is all this was meant to be.

10 years ago, I would have been an ass, maybe posted to smear another, A lot of things in my life have changed my perspective on life and people. I think many would be surprised why I do things now. And they are never vindictive or mean. Like the woman said "I ain't got time for that"

I hope the readers take information away from this thread and look closely at the hose they use if using ethanol.

I have always loved working on these cars and sharing the information I find.

-Chris

Greg E
04-16-2013, 10:48 AM
Hey Chris, drama aside, its probably a good idea to send those fuel injectors out to get flow tested/cleaned as well as the pump and tank itself. Wouldn't be surprised if small bits of rubber are coating everything. I see this kind of stuff all the time at my job (we specialize in tephlon coatings).

Ninja Performance
04-19-2013, 08:24 PM
As suspected, and shown by a very rough idle, the fuel injectors are caked and packed with degraded fuel line goo.

Courtney's rear fuel injectors, due to non ethanol compatible fuel lines, I bet the inside of the injector is just a gummed up mess. Replacing with Deatschwerks 1000cc injectors. Also replacing Ngk copper 9s (no reason at all for 9s on a 700hp car, especially one that is only street driven) with Champion race plugs.

And the one on the left, that isn't a bad picture, you can't see down the nozzle because it is packed with black goo. The way the nozzle lip doesn't look round on them, Buildup of black goo, and some the holes in the injectors are all covered as well. Wonder what the insides look like.

https://sphotos-b.xx.fbcdn.net/hphotos-ash3/920061_556255424397309_1494184577_o.jpg

Tearing down all fuel components, This is why I recommend stainless steel filter elements with E85. This was in Courtney's car, paper, it is soft, degraded, and of course full of the degraded hose rubber. Replacing with stainless steel element.

https://sphotos-a.xx.fbcdn.net/hphotos-frc1/913882_556272577728927_929294339_o.jpg

Should be all wrapped up Sunday, Saturday is the monthly Carolina 3S meet, will be nice to have a day off. Oh Wait, driving a customer's car back from the meet to work on it. LOL.

-Chris

Blackmount
04-19-2013, 08:42 PM
I would just like to add also on the Russel Pro classic line, I have used it myself many times on other peoples cars, a couple of which were running ethanol and they never complained to me about leaks over these last few years or anything. I also have a few mustang friends running the Russel pro classic line with no issues on e85.


Hmmm, great Why not to do (blank) thread. lol

TurboSinceBirth
04-20-2013, 12:00 AM
That same thing happens with a SS filter. It's not the fuel hose deteriorating producing the black goo. It won't break down the rubber to a liquid form. The black goo is from the E85 itself. Google black goo E85 and you will see tons and tons of threads on it. My guess is Courtney has been running E85 for awhile. Sometimes it can happen within a few hundred miles or it could take longer. The black goo was sent out for testing and came back as an additive. When E85 is spraying out the injector some of the additive is left behind "crashing out" as that tar like substance due to not being as soluble in ethanol. Soaking the injectors in gasoline or running a tank of 93 every once in awhile dissolves it out. If it were the ethanol deteriorating the rubber lines itself gasoline would not dissolve the black gooey substance. Not all places that sell E85 use the additive so it can depend on the station.

This link is a good read. It has some chemist info. http://forums.evolutionm.net/alternative-fuel/423231-e85-injector-gunk-seafoam-3.html.

green-lantern
04-20-2013, 12:54 AM
Not getting into drama at this point in my life, but must address inference that this thread was done with malice.

I mainly posted this up because the issue of ethanol and non ethanol safe lines, to show what can happen. Never stated who did it, where it had been, what products were in it.

I have always loved to make threads to spread information to others. Some of my many many threads are just that. And that is all this was meant to be.

10 years ago, I would have been an ass, maybe posted to smear another, A lot of things in my life have changed my perspective on life and people. I think many would be surprised why I do things now. And they are never vindictive or mean. Like the woman said "I ain't got time for that"

I hope the readers take information away from this thread and look closely at the hose they use if using ethanol.

I have always loved working on these cars and sharing the information I find.

-Chris

The Chris I know and love. :respect:

green-lantern
04-20-2013, 01:00 AM
Oh I don't go there often unless I'm bored.

This.............................................. ...

Ange
04-20-2013, 03:23 AM
Everyone going cray talking teflon/PTFE don't need to go that far unless you really have the money to spend on that.
-Chris

Is teflon really that much more expensive.

I'm looking at replacing my fuel lines with teflon and the price difference from rubber really isn't alot. On ebay atleast :D but teflon is teflon right. Fittings and lines maybe 15% more expensive.

Ninja Performance
04-20-2013, 09:07 AM
That same thing happens with a SS filter. It's not the fuel hose deteriorating producing the black goo. It won't break down the rubber to a liquid form. The black goo is from the E85 itself. Google black goo E85 and you will see tons and tons of threads on it. My guess is Courtney has been running E85 for awhile. Sometimes it can happen within a few hundred miles or it could take longer. The black goo was sent out for testing and came back as an additive. When E85 is spraying out the injector some of the additive is left behind "crashing out" as that tar like substance due to not being as soluble in ethanol. Soaking the injectors in gasoline or running a tank of 93 every once in awhile dissolves it out. If it were the ethanol deteriorating the rubber lines itself gasoline would not dissolve the black gooey substance. Not all places that sell E85 use the additive so it can depend on the station.

This link is a good read. It has some chemist info. http://forums.evolutionm.net/alternative-fuel/423231-e85-injector-gunk-seafoam-3.html.

Yes, the E85 additive pack can lead to goo, but all his lines were gushing like strainers, so there is a good chance the injectors are clogged with particles of his deteriorated lines.

-Chris

ICPREY
04-20-2013, 11:52 AM
Is teflon really that much more expensive.

I'm looking at replacing my fuel lines with teflon and the price difference from rubber really isn't alot. On ebay atleast :D but teflon is teflon right. Fittings and lines maybe 15% more expensive.

Skip the ebay shit, it's a PITA to work with and they tend to leak. It's not that much more unless you want the black coated stuff. The fittings will also cost more, but I would get the stainless ones vs aluminum.

Ange
04-20-2013, 12:09 PM
Skip the ebay shit, it's a PITA to work with and they tend to leak. It's not that much more unless you want the black coated stuff. The fittings will also cost more, but I would get the stainless ones vs aluminum.

why would they leak? speak of experience, or just the regular everything on ebay is trash train. newsflash. many stores buys their products from ebay sources. not everything is trash there. some of them just sell alot which alows them to keep low prices.

maybe the rubber ones are crappy quality rubber but other than that I don't see why there would be any difference. not the teflone ones. the rubber I wouldn't trust but teflon is teflon.

ICPREY
04-20-2013, 01:44 PM
From experience. Thanks for the newsflash:rolleyes: I bought this hose and their fittings http://www.anfittingsdirect.com/product_info.php?cPath=302&products_id=1241&osCsid=f01fffc94b599424c52224dd45189043 .They are also on ebay. The black coating is horrable to work with and the fittings would leak from the holes on the barrel and not the fitting/hose connection. Aeroquip's Teflon from Summit isn't that badly priced or you could take Ninja's advice and use the Russel hose he suggests.
Buy some ebay stuff see if you like it or if it works for you. I bought about $200 worth and realized I would rather go with a known quality product that works.

ICPREY
04-20-2013, 01:45 PM
Double post....

TurboSinceBirth
04-20-2013, 05:08 PM
Yes, the E85 additive pack can lead to goo, but all his lines were gushing like strainers, so there is a good chance the injectors are clogged with particles of his deteriorated lines.

-Chris

Clogged yes but goo no. It would merely be small chunks if anything.

TurboSinceBirth
04-20-2013, 05:15 PM
It will eliminate one thing having lines that won't crack, leak, crumble whatever but the problem with the goo will still be there if he doesn't change gas stations or run 93 every once in awhile. It's hard to say if there's any correlation between a gas station not putting in the proper liner repurposing a diesel tank to e85 or the chemical additives/detergents used in the gasoline they add is the main reason. I don't think too many ethanol stations give people this problem or it would be more well known. I know it would have to be really really bad to see it quickly in the injectors, filter, or pump sock.

The lines, injector cleaning or replacement, new pump or at least cleaned/tested, and a cleaned tank is all necessary regardless of either issue. I'm not doubting that.

MistercVR4
04-20-2013, 09:12 PM
TurboSinceBirth,
Good point. I've only had the car back 8 days before the leaking began. The car spent 23 months at 3sx doing the build. Due to my military deployments, I finally pick it on the last friday in Oct. So, it could being with the car sitting there it may have been the cause for the lines breaking down and just so happen once I got it back I caught the azz end of the problem. That's being said, I was told that it wasn't the first time the line leak and was replace. So I would assume that they was aware of the lines having this issues so they just replace it with the same type and didnt think anything else.
Also I was told once you go E85 I couldn't use anything else since it was tune on that soley. Now, if E85 is the issues, I have yet another problem. Hell the charge me a grip for tuning so now it may seem I would have to either change from e85 back to 93 or racing gas.
Now, when I pick the car up it they had it pretty much full with E85, So me and my pops drive to station a few miles away to full up with 15 gals of E85. However, I did notice on the pump it listed E85 but had E70 showing. I thought it was odd. I assume that was the same station they got the E85 from during the tuning process. Now, on the way back I stop in Benson, NC and they had E85 which listed E85 not E70 on the pump. So I was like WTF. I top off the car and full up my 2 addition containers.
So, at this point I really don't know what to think. I figure if they tune the car they would know what's what's. However, I find myself having to pay more money for something that may have being over look at the time as well putting me in harms way with a car that could starting spraying E85 while driving it on the road and heaven knows what danger that could've cause.
Well Chris, is my last result. After spending the kind of money I spent with 3sx I just can't see continue if I can't drive my car for no more than 8 days. But, finger are cross. I just think that it wasnt enough research doing the builds and tune on the causes or effect of E85. I just went with what was recommended. Now, i'm second guessing that I shoud've went with racing gas instead of E85. Hell maybe I can get some of the e90 stuff Chris use. Now, i have a garage to store my car I can keep a 55 gal of that stuff in there too.

TurboSinceBirth
04-21-2013, 02:46 AM
TurboSinceBirth,
Good point. I've only had the car back 8 days before the leaking began. The car spent 23 months at 3sx doing the build. Due to my military deployments, I finally pick it on the last friday in Oct. So, it could being with the car sitting there it may have been the cause for the lines breaking down and just so happen once I got it back I caught the azz end of the problem. That's being said, I was told that it wasn't the first time the line leak and was replace. So I would assume that they was aware of the lines having this issues so they just replace it with the same type and didnt think anything else.
Also I was told once you go E85 I couldn't use anything else since it was tune on that soley. Now, if E85 is the issues, I have yet another problem. Hell the charge me a grip for tuning so now it may seem I would have to either change from e85 back to 93 or racing gas.
Now, when I pick the car up it they had it pretty much full with E85, So me and my pops drive to station a few miles away to full up with 15 gals of E85. However, I did notice on the pump it listed E85 but had E70 showing. I thought it was odd. I assume that was the same station they got the E85 from during the tuning process. Now, on the way back I stop in Benson, NC and they had E85 which listed E85 not E70 on the pump. So I was like WTF. I top off the car and full up my 2 addition containers.
So, at this point I really don't know what to think. I figure if they tune the car they would know what's what's. However, I find myself having to pay more money for something that may have being over look at the time as well putting me in harms way with a car that could starting spraying E85 while driving it on the road and heaven knows what danger that could've cause.
Well Chris, is my last result. After spending the kind of money I spent with 3sx I just can't see continue if I can't drive my car for no more than 8 days. But, finger are cross. I just think that it wasnt enough research doing the builds and tune on the causes or effect of E85. I just went with what was recommended. Now, i'm second guessing that I shoud've went with racing gas instead of E85. Hell maybe I can get some of the e90 stuff Chris use. Now, i have a garage to store my car I can keep a 55 gal of that stuff in there too.

The E70 is a winter blend of the E85 fuel. It's what I've been running since we only get true E85 in June and July here in Kansas during the summer. That's not the issue. I would recommend trying a different gas station for your ethanol if you can. This really isn't a huge problem or else we would hear about it all the time. I came across it awhile ago but so far haven't dealt with any of the goo. I would think if you drove it 8 days and 3SX probably didn't put too many miles on it either that you were getting some bad ethanol for it to gum up that much. The station may have added to much additive to overcompensate for something. The alternatives are to pull the injectors and filter every so often to soak them in gas or run a different fuel. I really think getting your fuel at a different station is the best bet. Surely you have more than one somewhat close. If not it will at least be worth a little longer drive to not have to deal with this. You will know when something is up because it will seem like your car is running out of fuel going leaner WOT.

Ninja Performance
05-14-2013, 01:12 PM
Same car, been acting funky, aftermarket gauges were kind of blinking and dash lights were flickering and car not running well. So...

Bad battery relocation
I always try to persuade customers to not move the battery to the rear of the car. It rarely goes well. And I have seem my share of cars with very odd electrical issues and when the battery has been moved it's almost always to blame. Of course this one is just simple electronics 101. And I haven't even looked at where the positive cable is connected to the power cables under the hood. That will be tomorrow's treat. This is par for the course with this car. Loose nuts, bolts, bad electrical connections.

This is the same car that had the speedo wire cut at the ECU. Not good for idle speed sense or setting up 2 step on the AEM.


https://www.facebook.com/photo.php?v=564945480194970&l=411213388380694514

Be sure if you do a battery relocation, or any electrical for that matter, it is done correctly, and 100%. You can blow engines otherwise.

https://www.facebook.com/photo.php?v=564689666887218&l=2940243544087701660



-Chris

DuTTch
05-14-2013, 01:57 PM
sounds like the average modified VR4 lol

CoreyB
05-14-2013, 02:07 PM
So his only ground was going to the body in the trunk? Wow

Ninja Performance
05-14-2013, 05:48 PM
So his only ground was going to the body in the trunk? Wow

Yes, the shop that did the battery relocation made only 1 ground, battery to the bodypan right there at the battery box, and as you can see in the video, that wasn't even tight. Which was making everything in the car flicker. The AEM WB sensor took a dump, replaced the sensor and that came back to life.

-Chris

Stealth_RT
05-14-2013, 10:57 PM
So what is the best way to ground the relocated battery? Run a heavy gauge ground wire up to the engine bay? Mine's grounded on the rear strut tower, good solid clean bolted connection, and so far I've never had a problem.

Unlogic
05-15-2013, 08:25 AM
Interesting to hear how common battery relocation related problems seem to be.

I moved my battery to a custom enclosure behind the rear seats and connected the ground cable to one of the large bolts for the front seatbelts (after carefully removing the paint behind the bolt on both the car and the seatbelt). Haven't notice any problems so far.

http://pics.unlogic.se/3000gt/projekt/IMAG2098.jpg

http://pics.unlogic.se/3000gt/projekt/IMAG2088.jpg

I bet most problems you see are related to grounding and how the positive cable connects to the stock harness.

The ground connection looks so loose in the video you posted that it amazes me that the car even started.

CoreyB
05-15-2013, 08:49 AM
I highly recommend running a heavy gauge wire straight to the engine block. When your main ground is so far away from the original ground, you run the risk of creating all kinds of ground loops.

Greg E
05-15-2013, 09:18 AM
That's a great idea Unlogic! I might copy you next time someone comes to me for a battery relocation. :)

J. Fast
05-15-2013, 09:29 AM
Interesting to hear how common battery relocation related problems seem to be.

I moved my battery to a custom enclosure behind the rear seats and connected the ground cable to one of the large bolts for the front seatbelts (after carefully removing the paint behind the bolt on both the car and the seatbelt). Haven't notice any problems so far.

http://pics.unlogic.se/3000gt/projekt/IMAG2098.jpg


You do some profound work. Very few people are as critical. Your relocate is awesome!

On another note, I'm continually amazed to see owners with 500+ wheel horsepower neglecting to nut-and-bolt their cars. Everything works itself loose on these cars if you modify them from stock and lean on them. I properly torque bolts and continually find myself re-torquing them. They continually work themselves loose.

On all the race cars I have worked on and crew'd, the most critical task at the end of each day is nut-and-bolting. Everything works itself loose, even the engine internals. That is one of the gifts bestowed on high horsepower mitsubishi's.

Unlogic
05-15-2013, 10:39 AM
That's a great idea Unlogic! I might copy you next time someone comes to me for a battery relocation. :)


You do some profound work. Very few people are as critical. Your relocate is awesome!

Thanks guys!

For anyone interested in copying the idea these two posts contain few more photos of the construction, assembly and installation.

http://www.3sgto.org/3000gt-stealth-gto-related-topics/10823-slightly-tweaked-3000gt-tt-9.html#post229565

http://www.3sgto.org/3000gt-stealth-gto-related-topics/10823-slightly-tweaked-3000gt-tt-9.html#post229567

green-lantern
05-15-2013, 12:12 PM
Thanks guys!

For anyone interested in copying the idea these two posts contain few more photos of the construction, assembly and installation.

http://www.3sgto.org/3000gt-stealth-gto-related-topics/10823-slightly-tweaked-3000gt-tt-9.html#post229565

http://www.3sgto.org/3000gt-stealth-gto-related-topics/10823-slightly-tweaked-3000gt-tt-9.html#post229567

+1 you do some amazing work.