iceorphen
04-10-2013, 07:41 PM
1991 $ 17000
52475248524952505251Im looking to make a sizeable investment elsewhere so this is up once again. If I can unload it at a reasonable loss I'll take it.
91' Black VR4, 56,000 miles. Old motor did not blow up, I sold it to a member on here so I could drop in a built one.
Interior has normal wear and tear, DS seat just actually developed its first rip a few weeks ago on the inside support. 9.5/10
Exterior near mint, DS sideskirt is missing a clip which makes it stick out a little, its not loose. Few scratches. 9/10
Price is obo
My name is Scott, 631-428-5072 txt me/pm me whenever or leave a message if i dont answer :)
-pmp motor 1400 miles 3.1l stock rods, ross pistons
-kevlar TB
-DR700 turbos, w/ polished forge wastegates
-oohnoo dual core FMIC
-DNP ypipe
-AEM adjustable FPR
-RC 660 Injectors
-Tial BOV
-Vac delete
-STM abs delete
-Cruise delete
-Rebuilt polished throttle body from dbest, w/ vac ports cut + sealed, bypass plate, and lower coolant nipples cut and plugged
-2g Brake conversion all around
-Black Racing Pro N1 18x9 wheels w/ 275/35/18 tires
-Front + rear adjustable control arms
-Maximal Performance solid mounts all around, actually very little vibration
-GZP Sidemount oil cooler/braided lines
-IPS polished aluminum preturbo pipes
-dnp o2 housings
-ATR downpipe into 3" straight pipe to stock muffler, no cats
-Southbend STG 4 FE clutch
-Tcase brace
-Solid shifter bushings
-Battery relocate to DS trunk
-Wally 400 pump
-ninja performance hotwire kit
-Fuel pressure gauge + adapter on front fuel rail
-stock wires w/ ngk coppers gapped @.28
-JVC single din headunit on top
-Pioneer speakers all around, incl tweeters
-AEM wideband in custom gauge panel in lower din
-60mm Stri smoked, white LED peak and hold oil/water/boost gauges
-Flash ECU with base tune, will update with dyno when its tuned
-LCD boost controller wired w/ wideband and mac valve for boost control, will include all the cables you need to datalog
-Tactrix 2.0 to flash is also included
-Intropy's keyless entry/remote start/push button start will be included depending on sale price, if it even sells
The "bad"
AC needs to be recharged, need a new drier
annoying noisy pulley below DS mount.. ill change it if/when i have time
52475248524952505251Im looking to make a sizeable investment elsewhere so this is up once again. If I can unload it at a reasonable loss I'll take it.
91' Black VR4, 56,000 miles. Old motor did not blow up, I sold it to a member on here so I could drop in a built one.
Interior has normal wear and tear, DS seat just actually developed its first rip a few weeks ago on the inside support. 9.5/10
Exterior near mint, DS sideskirt is missing a clip which makes it stick out a little, its not loose. Few scratches. 9/10
Price is obo
My name is Scott, 631-428-5072 txt me/pm me whenever or leave a message if i dont answer :)
-pmp motor 1400 miles 3.1l stock rods, ross pistons
-kevlar TB
-DR700 turbos, w/ polished forge wastegates
-oohnoo dual core FMIC
-DNP ypipe
-AEM adjustable FPR
-RC 660 Injectors
-Tial BOV
-Vac delete
-STM abs delete
-Cruise delete
-Rebuilt polished throttle body from dbest, w/ vac ports cut + sealed, bypass plate, and lower coolant nipples cut and plugged
-2g Brake conversion all around
-Black Racing Pro N1 18x9 wheels w/ 275/35/18 tires
-Front + rear adjustable control arms
-Maximal Performance solid mounts all around, actually very little vibration
-GZP Sidemount oil cooler/braided lines
-IPS polished aluminum preturbo pipes
-dnp o2 housings
-ATR downpipe into 3" straight pipe to stock muffler, no cats
-Southbend STG 4 FE clutch
-Tcase brace
-Solid shifter bushings
-Battery relocate to DS trunk
-Wally 400 pump
-ninja performance hotwire kit
-Fuel pressure gauge + adapter on front fuel rail
-stock wires w/ ngk coppers gapped @.28
-JVC single din headunit on top
-Pioneer speakers all around, incl tweeters
-AEM wideband in custom gauge panel in lower din
-60mm Stri smoked, white LED peak and hold oil/water/boost gauges
-Flash ECU with base tune, will update with dyno when its tuned
-LCD boost controller wired w/ wideband and mac valve for boost control, will include all the cables you need to datalog
-Tactrix 2.0 to flash is also included
-Intropy's keyless entry/remote start/push button start will be included depending on sale price, if it even sells
The "bad"
AC needs to be recharged, need a new drier
annoying noisy pulley below DS mount.. ill change it if/when i have time