PDA

View Full Version : Is the Rear Engine Mount Cover Still Available New??



Street_Chally73
04-06-2013, 01:34 AM
I'm working on getting the rest of my engine mounts replaced with my 3SX poly ones while I have the most room available in my engine bay, but one of the PO has ever so kindly taken it upon himself to remove my rear engine mount heat shield/cover & never thought to put it back on (or perhaps they did, but forgot to put the mounting bolt through it & lost it somewhere on the highway...After all, it did say "Little Miguel Racing Motor" on my rear valve cover:eh:).

Anyways, does anyone happen to know if this particular cover is still available through the dealers or any other possible outlets? I'd like to source one & install it just for piece of mind, even though some may feel it's an unnecessary item (like the hood's heat shield).

Also, can anyone verify if the rubber stoppers located on both the transaxle & driver's side engine mount are still available? The part #'s are MB581953 & there should be four of them (someone please correct me on the total count if I'm wrong)...Again, these were taken off when the PO pulled the engine for repairs & were never installed afterwards.

Any help is appreciated!! Thanks!!:Bow:

kywhitelightning
04-06-2013, 06:09 AM
I have everything you're looking for. The rear cover's holes are a little oblonged due to a worn mount but it is still servicable for it's intended purpose. All of these are used. $15 should cover the shipping and they are yours if you want them.

Jeff

Street_Chally73
04-06-2013, 06:20 AM
PM sent. I would still like to know if anyone happens to know if they still sell all of these parts new or not. The prices I saw on Cherry Hill's site for the rubber side stoppers wasn't really bad, but I couldn't call Jeff or Mike to find out if they're still available.

I can always call them come Monday, but I was kinda hoping someone here may have bought these items recently.


Sent from the garage

stealthee
04-06-2013, 12:01 PM
I beleive I have some of the rubber side mount covers as well if things don't work out with ky

futurevr4man
04-06-2013, 02:57 PM
i have some of the rubber side stoppers that are new in the packaging as well

Street_Chally73
04-06-2013, 03:08 PM
i have some of the rubber side stoppers that are new in the packaging as well

I PM'ed you.

Thanks guys!

futurevr4man
04-06-2013, 03:48 PM
i pm'd you back :)

Street_Chally73
04-06-2013, 03:58 PM
i pm'd you back :)

I tagged you back, lol.

Well Jeff (KYWhiteLightning), I believe I found everything I needed from Future. Thanks for offering up yours first, though!

futurevr4man
04-06-2013, 04:16 PM
sorry jeff. i didnt intend on stealing him from you, just tryin to help :)

Street_Chally73
04-06-2013, 04:19 PM
Mods, can you lock this thread, please? I got everything I needed from it & don't need people bumping it two years from now...:suspect:

Thanks to everyone who have responded to this thread & Nate for having everything I needed all still in new condition!!

kywhitelightning
04-07-2013, 03:58 AM
sorry jeff. i didnt intend on stealing him from you, just tryin to help :)

No stealing going on. My intention was solely to get OP the parts he needed. You got them for him and that's great! I was only interested in shipping reimbersment anyway, so no loss or gain for me regardless.

I'm not on the boards like I used to be and typically only visit once daily, late at night/early in the morning.

Irregardless, glad OP got what was needed.

Jeff

wingnut
04-07-2013, 01:20 PM
Mods, can you lock this thread, please? I got everything I needed from it & don't need people bumping it two years from now...:suspect:

http://farm4.staticflickr.com/3494/3929901468_b01941352a.jpg

RealMcCoy
04-07-2013, 01:28 PM
http://farm4.staticflickr.com/3494/3929901468_b01941352a.jpg

You've already set your calender to come back and bump this in two years haven't you....?